Hana ʻia e Bethel, Conn.-based Society of Plastics Engineers, ʻo ka hālāwai kūkā ʻenehana plastics makahiki i kapa ʻia ʻo Antec i hui pū me NPE a holo Mei 7-10, 8 am-6 pm, ma ka Orange County Convention Center ma Orlando, Fla. Manaʻo ʻo SPE. e hoʻokomo i 1,500 poʻe i hele mai a loaʻa iā 550 ʻoihana a me nā hōʻikeʻike loea.
ʻO nā mea haʻiʻōlelo plenary ʻehā no ka hālāwai kūkā ʻehā lā ʻo Scott Schiller o HP Inc., Rajen Patel o Dow Chemical Co.'s Performance Packaging unit, John Beaumont o ka American Injection Molding Institute a me Beaumont Technologies a me ke kaukaʻi Phil Coates o ke Kulanui o Bradford ma ʻEnelani a me ka Polymer Interdisciplinary Research Center.
E ʻike a hōʻike aku ʻo SPE i nā mea manawaleʻa hou loa me ke kūlana o nā lālā lawelawe hanohano: Luyi Sun o ke Kulanui o Connecticut a me Uday Vaidya o ka Institute for Advanced Composite Manufacturing Innovation.
E hoʻohanohano ʻo SPE i ʻeiwa mau hoa hou - Ashok M. Adur, Carol Forance Barry, Mehmet Demirors, Dan Falla, John W. Gillespie Jr., Tie Lan, Russell Speight, Uttandaraman Sundararaj a me Michael Thompson - ma Antec.Mai ka hoʻomaka mua ʻana ma 1984, ua kapa ʻia ʻo SPE i nā lālā 334 i mau hoa.
E hoʻomaka ana ma ka Lāpule, Mei 6, mai ka hola 2-4 pm ma ka lumi N320FGH, ʻo Cross-Link Your Network, kahi kamaʻilio ākea i hoʻoponopono ʻia e nā ʻoihana ʻoihana ʻōpio a me nā haumāna e pili ana i ka hoʻohana ʻana i ka Society of Plastics Engineers e kōkua i ka hoʻololi ʻana i nā ʻoihana kula a me nā ʻoihana.Ua ʻike mua ʻia ʻo Cross-Link Your Network ʻo Pilot Our Future.
Aia ʻelua mau hanana SPE Next Gen ma ka Pōʻakahi, Mei 7: ʻO ka hui aʻoaʻo aʻoaʻo Gen aʻe mai 8-11 am ma ka lumi N320E a me FLiP a me Sip Reception, i hōʻike ʻia hoʻi e nā alakaʻi o ka ʻoihana ʻoihana Plastics i ka Plastic, mai 4:30-6 :30 pm ma ka Hale Hōʻikeʻike ʻo Valencia Ballroom ma ke West Building Level 4.
Wehe ʻia i nā haumāna wale nō, mālama ʻia ka ʻaina awakea haumāna i ka Pōʻakolu, Mei 9 mai 12:30-2 pm ma ka lumi W414AB.
E hoʻolaha ʻia nā mea lanakila ma nā ʻāpana ʻehā, me ka People's Choice Award a me Grand Award, o ka SPE Plastics for Life Global Parts Competition i ka Pōʻakolu, Mei 9, ma hope o ka hoʻokolokolo ʻana ma Mei 7-8 ma ke alahele ma waho o nā lumi papahana.ʻO nā ʻāpana ʻehā e pili ana i ka hiʻohiʻona ʻo ka pale ʻana i ke ola (mālama, palekana, hoʻopaʻa a me ka pale), Quality of Life (mobility, communication, luxury/comfort, recreation and entertainment), Improving Life (hoʻonaʻauao, ikehu, manawa kūpono a me ke olakino) a me ka hoʻomau ʻana i ke ola. (ke kaiapuni, mālama, hoʻomau, hana hou a hoʻemi).
ʻO ka makana hanohano loa o ka hoʻokūkū, ʻo ka Grand Award, hele i ka ʻāpana kiʻekiʻe loa ma waena o nā koho ma nā ʻāpana ʻehā.Ua koho ʻia ka mea lanakila People's Choice e nā poʻe Antec i hele mai ʻaʻole lākou he limahana SPE, nā lālā o ke komite Plastics for Life a i ʻole nā luna kānāwai.
Aia i loko o ka papa o nā luna kānāwai nā pelekikena SPE i hala, nā hoa SPE, nā lālā o ka media a me nā loea ʻoihana.
Aia pū ma Antec ka ʻAina kakahiaka Hui Wahine ma ka hola 7-8:30 am, Pōʻalua, Mei 8, no ka poʻe loea plastik a me nā haumāna, kahi e hōʻike ai nā mea haʻiʻōlelo i kā lākou ʻike o ka hana ʻana i ka ʻoihana.E hoʻoponopono ʻia kēia hanana e Vicki Flaris, ke kaukaʻi piha ma Bronx Community College a me ka pelekikena mua o ka Society of Plastics Engineers.
ʻO nā mea haʻiʻōlelo ma ka ʻaina kakahiaka ʻo Shelley Fasano, hope pelekikena o nā hana no Dymotek Corp.;Heather Meixel, pelekikena o Bamar Plastics Inc.;ʻO Wesleyne Greer, ka luna nui o ke kūʻai aku no Materia Inc.;a me Judy Carmein, ka luna huahana honua o CNC machining no Proto Labs Inc.
Pono ke kakau inoa.Hoʻokipa ʻia nā kāne a me nā wahine e hele mai.E mālama ʻia ka ʻaina kakahiaka hoʻohui wahine ma ka lumi N310FGH.No ka 'ike hou aku, e kipa www.eiseverywhere.com/ehome/252707/700179.
8:30-9 am: Hoʻololi ʻia o PLA no ka hoʻopili ʻana i ka Layer-to-Layer Adhesion i hoʻomaikaʻi ʻia i nā ʻāpana 3D i paʻi ʻia, Michael Thompson, McMaster University
9-9:30 am: Ka Hoʻoikaika o ka Manawa Layer ma nā ʻāpana o ka hopena i ka Fused Deposition Modelling Process, Frederick Knoop, Paderborn University-DMRC
9:30-10 am: Nā hopena o ka Polymer Rheology ma ka Predicted Die Swell and Fiber Orientation in Large-Scale Polymer Composite Additive Manufacturing, Zhaogui Wang, Baylor University
10-10:30 am: Nā Pono Mechanical of Reinforced Compounds for Large-Format Additive Manufacturing, Rabeh Elleithy, Sabic
10:30-11 am: Ka Hoʻoikaika o ka Melt Flow Rate a me ka Nozzle Temperature i Fused Filament Fabrication, Nicole Hoekstra, Western Washington University
11-11:30 am: Mechanical Properties of 3D Printed Polylactide/Microfibrillated Polyamide Composites, Nahal Aliheidari, Ph.D.Haumāna, Washington State University
8-8:30 am: Keynote: Innovation in Mature Markets: Understanding Global Trends Across the Value Chain Key and Accelerating Development, Narayan Ramesh, Dow Chemical Co.
8:30-9 am: Melt-Mastication o Isotactic Polypropylene no ka hoʻomaikaʻi ʻana i nā waiwai wela a me ke kino, Brian Cromer, R&D, Arkema LLC
9:30-10 am: Nā ala e hoʻonui ai i nā waiwai Thermoelectric o Melt Mixed Polypropylene-Carbon Nanotube Composites, Petra Pötschke, IPF Dresden
10-10:30 am: Ka ʻimi ʻana o nā ʻāpana PTFE Textured hou i hoʻokumu ʻia i ka Creep Relaxation, Ali Gordon, University of Central Florida
10:30-11 am: Composition Dependent Charge Storage and Emi Shielding Performance of Thermoplastic Elastomer Nanocomposites Containing MWNTs, Shital Pawar, University of Calgary
8-8:30 am: Kahe, Hoʻohui a me ka Reaction o Polymer Reactive Blending i kahi Twin-Screw Extruder, Cailiang Zhang, Zhejiang University
8:30-9 am: Ka hopena o ka High-Speed Twin- and Quad-Screw Compounding ma ka Molecular Weight, Molecular Weight Distribution, a me Mechanical Properties of Polyethylene Composites, Mansour Albareeki, Ph.D.haumana, UMass Lowell
9-9:30 am: Hōʻoia Hoʻokolohua o Fill Ratio, Resin Pressure, Resin Temperature i loaʻa mai ka 2.5D Hele-Shaw Model i ke kahe o Corotating Twin-Screw Extruder, Masatoshi Ohara, Toshiba Machine Co. Ltd.
9:30-10 am: Hoʻolālā a me ka hoʻopaʻa ʻana i ka helu ʻana o nā mea hoʻohuihui hoʻonui ʻia no ka hoʻomaikaʻi ʻana i ka hui ʻana i ka hui ʻana i nā hana Extrusion, Vivek Pandey, Case Western Reserve University
10-10:30 am: ʻO ke ʻano o ke koʻikoʻi i loko o kahi Twin-Screw Extruder no ka hana ʻana a me ka Extrusion o Extrinsically Self-Healing Thermoplastics, Connor Armstrong, University of Maryland, College Park
10:30-11 am: Hoʻomaikaʻi ʻia ʻo Nanoclay Dispersion ma Ethylene Vinyl Alcohol ma o Sub-Critical Gas-Assisted Processing, Thomas Ellingham, Ph.D.haumana, UW-Madison
11-11:30 am: New Involute Extruder Screw Elements no ka hoʻomaikaʻi ʻana i ka huahana a me ka maikaʻi, Paul Andersen, Coperion
11:30-12 pm: Hoʻoholo i nā pilikia hānai no nā hui kūikawā ma ka TriVolution Compounder, Gonzalo Marulanda, B&P Littleford
8:30-9 am: Hoʻomohala ʻana i nā Molecular Diffusion Models for Ultrasonic Welding of PLA, Karla Lebron, haumāna puka, Iowa State University
9-9:30 am: Nā hopena o ke kūkulu ʻana a me ka pae piha i nā ʻano mīkini o Fused Deposition Modelling PLA, Avraham Benatar, Ke Kulanui o Ohio State.
9:30-10 am: Hoʻoponopono ʻana i ka maikaʻi ʻo Ultrasonic Weld me ka mānoanoa o ka papa hehee, Alex Savitski, Dukane IAS
10-10:30 am: Hoʻomaopopo i ka Meltdown i ka wā Quasi-Simultaneous Laser Transmission Welding, Philip Bates, Royal Military College of Canada
10:30-11 am: Ka noiʻi ʻana ma ka Temperature Field of Laser Transmission Welding Polycarbonate Ma muli o 3D Real Surface Topography, Zhong Hongqiang, Soochow University
11-11:30 am: ʻO ke kahua wela a me ka hoʻoheheʻe ʻana o ka pā wai o Laser Transmission Welding Polycarbonate, Yan Tingpei, Ke Kulanui o Soochow
8-8:30 am: Ka Loiloi ʻana i nā hoʻokomo ʻana o ka Plumbing Polybutylene ma hope o ka lawelawe lōʻihi, ʻo Dale Edwards, Engineering Systems Inc.
8:30-9 am: Ka hana ʻana o ka PE Pipe Resins i loko o ka Chlorine Dioxide i loaʻa i ka Aqueous Solution, Márton Bredács, Polymer Competence Center Leoben
9-9:30 am: Ka helu ʻana i ka Degradation Oxidative i loko o ka paipu Polyolefin e IR Spectroscopy, Don Duvall, ESi
9:30-10 am: Pipe Quick Burst Pressure Investigations of Sample Length on Two Plastics, Bryan Hauger, Hauger Consulting
10-10:30 am: ʻenehana no ke ana ʻana i ke anawaena, ovality, ka mānoanoa o ka pā a me ka hāʻule ʻana o nā paipu plastik nui, Katja Giersch, SIKORA AG.
10:30-11 am: Nā hopena o ka Primer i ka Mechanical Behavior of CPVC Pipe, Bingjun Chen, University of Alberta
11-11:30 am: Nā Kuleana Mechanic Fracture no ka Hoʻolālā Pipe-Wall Multilayer, Florian Arbeiter, Montanuniversität Leoben
8-8:30 am: Hana Hoʻohui ʻia o nā mea hana hoʻoheheʻe i hoʻopaʻa ʻia i ka wela me ka hoʻohana ʻana i ka Arc Welding and Diffusion Bonding, Johannes Ullrich, Hochschule Schmalkalden
8:30-9 am: Ka hoʻomalu ʻana i nā ʻāpana ʻāpana kūloko me ka hoʻohana ʻana i kahi mana wela i hoʻokaʻawale ʻia i ka hoʻoheheʻe ʻana, Mauritius Schmitz, Institute of Plastics Processing (IKV) i ka ʻoihana a me nā hana akamai.
9-9:30 am: Keʻano o ka hoʻopiha pihaʻana i nā hana a me nā pono mechanical o nā hiʻohiʻona Micromolded, Jiang Jing, Zhengzhou University
9:30-10 am: Valve Gate Open Lag Time in Conventional Hot Runner System, Byungohk Rhee, Ajou University
10-10:30 am: Injection Molding Setup by Means of Machine Learning Based on Simulation and Experimental Data, Julian Heinisch, Institute of Plastics Processing (IKV) in Industry and the Skilled Crafts ma RWTH Aachen University
10:30-11 am: Ke aʻo ʻana i kahi loiloi Optical o ka hoʻopili ʻana i ka ʻili ma ka Multilayer Injection Molding Process, Byungohk Rhee, Ajou University
11-11:30 am: Hoʻohālike o ka Ultrasound-Assisted Ejection ma Micro Injection Molding, Giovanni Lucchetta, University of Padova
8-8:30 am: Nā Huahana ʻAiani Kiekie Kiʻekiʻe, Haʻahaʻa Haʻahaʻa Bubble no nā Hui Māmā Māmā, Stephen Amos, 3M
8:30-9 am: Nā mea hoʻopiha hana kiʻekiʻe: ka laulā o ka hoʻomaikaʻi ʻana me nā ʻāpana liʻiliʻi, Péter Sebö, Quarzwerke GmbH
9-9:30 am: Nā ʻike hou mai ka hoʻopuehu ʻia ʻana o nā Nanotubes Carbon Multiwalled ma o ka hoʻomaikaʻi ʻana i nā ʻāpana hoʻoheheʻe ʻana i ka wā o ka hana ʻana o nā Nanocomposites Polypropylene-Based, Valérie Lison, NANOCYL
9:30-10 am: Acrylonitrile Butadiene Styrene/Mica Composites: Hoʻomākaukau a me ke ʻano, Mohammed Alghamdi, Yanbu Industrial College
10-10:30 am: ʻO ka hoʻonui ʻana i ka helu o nā mea hoʻohui no ka hoʻopaʻa ʻana i ka polypropylene i piha i ke aniani, Syed Hassan, A. Schulman Inc.
10:30-11 am: He ʻeleʻele kalapona hou no ka mokulele kiʻekiʻe a me ka hoʻopuehu maʻalahi, Marc Delvaux, Cabot Corporation
8-8:30 am: Hoʻomohala ʻana i nā Elongational Mixing Geometries no Twin-Screw Compounding Extruders, Adam Dreiblatt, CPM Extrusion Group
8:30-9 am: Ke alo nei i nā pilikia o ka wā e hiki mai ana me ka RingExtruder RE, Erdmann Michael, Extricom Extrusion GmbH
10:30-11 am: Coperion Pelletizing Technology Update: He aha ka mea hou a me ke kumu?, Mike Bickley lāua ʻo Eberhard Dietrich, Coperion
1:30-2 pm: 3D Printing Feedstock from Recycled Materials, Nicole Zander, US Army Research Laboratory
2-2:30 pm: E loiloi i ka hana o ka Acrylonitrile Butadiene Styrene i hoʻoikaika mau ʻia me kahi Thermotropic Liquid Crystalline Polymer i Fused Filament Fabrication, Mubashir Ansari, Virginia Polytechnic Institute a me State University
2:30-3 pm: Kiekie-Impact Strength Polycarbonate Filament for Additive Manufacturing, Sarah Grieshaber, Sabic
3-3:30 pm: ʻO ka ikaika hoʻopaʻa ʻana i nā ʻāpana Plastics Multimaterial i hoʻohui ʻia, ʻo Jakob Onken, Institute of Plastics Processing ma RWTH Aachen University
3:30-4 pm: Crystallization Kinetics i ka wā o nā mea hana Extrusion-Based Additive Manufacturing o Polycaprolactone, Kalman Migler, NIST
4-4: 30 pm: Nā Manaʻo Hoʻoponopono: Cellulose Nanocrystal Thermoplastic Urethane Filament Production, Jacob Fallon, Virginia Polytechnic Institute a me State University
4:30-5 pm: Hoʻokumu a me nā pilina waiwai o ka Polyphenylene Sulfide i hana ʻia me ka hoʻoikaika ʻana i ka carbon fiber, Peng Liu, Oak Ridge National Laboratory.
5-5:30 pm: ʻIke ikaika o ka Fused Filament Fabricated Continuous Carbon Fiber Composite Test Samples, Rogelio Herrera, University of Wisconsin-Madison
5:30-6 pm: Hoʻomaikaʻi i ka hoʻokele uila o PC/ABS Printing Filament for Fused Filament Fabrication using Carbon Nanostructures, Nicole Hoekstra, Western Washington University
6-6:30 pm: Rheological Characterization and Quality Assessment of Commercial ABS Filaments for Fused Deposition Modeling, Adam Miller, Shawnee State University
1:30-2 pm: Keynote: Global Automotive Color Trend, Popularity and Who's Driving, George Ianuzzi, Sandream Impact LLC
2-2:30 pm: He Manaʻo no ka Titanium Dioxide Photo-Activity ma Polypropylene, Philipp Niedenzu, Chemours
2:30-3 pm: Ka hoʻomaopopo ʻana i ka Warpage i loko o ka Injection Molded Thermoplastics: Nā kumu a me nā hopena Pigmentary Hou loa, Breeze Briggs, BASF Colors & Effect USA LLC
3-3:30 pm: Hoʻonui i nā palena: ʻO Bismuth-Based Pigments no ka ʻoihana Plastics, Cristina Zanzottera, DCC Maastricht BV
3:30-4 pm: Hoʻonui i ke kala: He Pigment- a me Surface-Chemistry Perspective, Christopher Beier, Clariant Plastics and Coatings USA Inc.
4-4:30 pm: VOC Reducing Additives for Masterbatches and Final Polymer Articles, Rob Lorenzini, Maroon Group
1:30-2 pm: Ka hopena o ke koho ʻana i ka Resin ma ka hoʻokumu ʻana o ka pore o nā kiʻiʻoniʻoni polyethylene, Wenyi Huang, Dow Chemical Co.
3-3:30 pm: Ka hopena o ka Plastic Packaging i nā hopena o ke ola ma ka US a me Canada Substitution Analysis, Emily Tipaldo, American Chemistry Council.
4-4:30 pm: Hoʻohālike ʻana i ke ʻano kiʻiʻoniʻoni ma nā noi hoʻohui ʻana i ka pallet, Pavan Valavala, Dow Chemical Co.
4:30-5 pm: Hoʻemi ʻia ka Density Nylon 6/6 Compounds for Extrusion Applications, Ying Shi, A. Schulman Inc.
5-5:30 pm: ʻO ka pilina ma waena o ke kūkulu ʻana a me nā waiwai wela a me nā mīkini o Thermoplastic Polyester Materials, Jeffrey Jansen, The Madison Group
5:30-6 pm: Ka hopena o ka Annealing ma ke ʻano Viscoelastic Behavior o Polyetherketone, Zhiyuan Jiang, Texas A&M University
1:30-2 pm: 3D Numerical Simulation of Multiphase Flow in Partally Filled Twin-Screw Extruders, Hossam Metwally, ANSYS Inc.
2-2:30 pm: Nā Pono Mechanical o Ultrahigh Molecular Weight Polyethylene Nascent Fibers ma nā ʻano wikiwiki ʻokoʻa, Fangke Liu, haumāna, Beijing Institute of Technology.
2:30-3 pm: Hoʻonui ʻia ka Viscosity a me ka Hoʻopuehu ʻana i ka Polyethylene Terephthalate Compounding, Prakash Hadimani, Steer Engineering
3-3:30 pm: Hoʻonui i ka Thermal Conductivity o PVDF / Graphene Nanocomposites e ka Wai-Assisted Mixing Extrusion, Han-xiong Huang, South China University of Technology
3:30-4 pm: Nā hopena o ka Novel Extension Mixing Elements ma ka hoʻohele ʻana i ka lōʻihi o ka fiber ma ka Composite Extrusion, Molin Guo, Case Western Reserve University
4-4:30 pm: Hoʻomākaukau ʻia ʻo Transition Metal Dichalcogenide Thermoplastic Composites me ka hoʻohana ʻana i ka Lab Scale Extrusion, Joshua Orlicki, US Army Research Laboratory
1:30-2 pm: Micro Injection Molding of Polypro/Graphite Composite, Shengtai Zhou, University of Western Ontario
2-2:30 pm: Hoʻohana ʻia ʻo Fuaming Uniformity Control of High Weight Reduction Microcellular Injection Molded Thermoplastic Elastomer using Gas Counter Pressure, Chang Che-wei, Chung Yuan Christian University
2:30-3 pm: Mechanical and Rheological Characteristics of PP/PET Blend With Maleic Anhydrite and Jute Fibre, Abul Saifullah, Swinurne University of Technology
3-3:30 pm: Nā Pono Mechanical of Polyamide 6/Zeolite Composites, Davoud Jahani, University of Bonab
3:30-4 pm: Nā hopena o ka hoʻoponopono ʻana i nā ʻāpana i ka hāʻawi ʻana i ka lōʻihi o ka fiber a me ka ikaika tensile o ke aniani lōʻihi-fiber-reinforced nylon 6/6 composites molded parts, Hsin-Shu Peng, Feng Chia University
4-4:30 pm: Ka loiloi ʻana i ka holo ʻana ma o ka mokulele o nā ʻāpana i hoʻoheheʻe ʻia ma o ke kahua mākēneki i ke kaʻina hana injection, Chiu Min-Chi, Chung Yuan Christian University
4:30-5 pm: Hoʻomaikaʻi ʻia ka hana ʻana o Ultrahigh Molecular Weight Polyethylene ma o Supercritical Nitrogen a me Carbon Dioxide i loko o ka Injection Molding, Galip Yilmaz, Wisconsin Institute for Discovery at University of Wisconsin–Madison
5-5: 30 pm: Ka hopena o ka hoʻomaha hoʻomaha ma ka hoʻohaʻahaʻa a me ka Warpage o nā ʻāpana i hoʻoheheʻe ʻia, Zhiliang Fan, Moldflow R&D Center, Autodesk
5:30-6 pm: Ke aʻo ʻana i ka Viscoelasticity ma Warpage Validation, RuJing Jhang, CoreTech System (Moldex3D) Co., Ltd.
1:30-2 pm: ʻoihana ʻoihana: nā pilikia o ka hana ʻana i kahi moʻomeheu hoʻomaka, Bonnie Bachman
3-3:30 pm: ʻIke ʻIke ʻIke a me Domain Expertise Hoʻohui i nā Pūʻali i ka Transforming Strategic Industrial Marketing, Bala Ambravan
3:30-4 pm: ʻO ke kolu o ka ʻike hoʻomau ʻana o ka ʻoihana Plastics, Bonnie Bachman, Shristy Bashyal, Maggie Baumann
2-2:30 pm: Ka nānā ʻana i ka maikaʻi o nā ʻāpana i hoʻoheheʻe ʻia me ka hoʻohana ʻana i kahi ʻenehana Nondestructive, Felipe Gomes, Ph.D.haumāna, Ke Kulanui ʻo McMaster
2:30-3 pm: 3D Characterization and Mechanical Analysis of Polyethylene Foams Processed in Rapid Rotational Foam Molding, Wing Yi Pao, University of Ontario Institute of Technology
3-3:30 pm: Hōʻike 3D i ka maikaʻi o ka hoʻopaʻa ʻana i ka ʻili i ka ʻili o ka Ropid Rotationally Foam Molded Integral-Skin Cellular Composite.
3:30-4 pm: Hoʻomaʻamaʻa ʻia i ka ʻili o ka Agave Fibers a me kāna hoʻohālikelike ʻana me PLA e hana i nā Biocomposites Rotational Molded, Jorge Robledo-Ortíz, Universidad de Guadalajara
4-4:30 pm: Hoʻohālikelike Mechanical o Polyethylene/Carbon Nanofiber Composites i hoʻomākaukau ʻia e Rotational Molding, Milton Vazquez Lepe, Universidad de Guadalajara
4:30-5 pm: ʻO ka ʻoi aku ka maikaʻi o ka hana ʻana o ka Rotational Molding Processing of Agave Fiber/LMDPE Composite Materials, Pedro Ortega-Gudiño, Universidad de Guadalajara
5-5:30 pm: Morphology and Mechanical Properties of PLA Blends i Hana ʻia e Rotational Molding, Eduardo Ruiz Silva, Universidad de Guadalajara
5:30-6 pm: ʻO ka hoʻololi ʻana o nā mea hui like ʻole ma muli o ka Linear Low Density Polyethylene/Ground Tire Rubber/Maple Wood Fibers, Denis Rodrigue, Université Laval
1:30-2 pm: Nā TPE Overmolding Hou i nā noi me nā koi kūikawā, Kushal Bahl, Teknor Apex Company
2:30-3 pm: ʻAe ʻo Synventive's New Synflow Technology i ka poʻe Molders i ʻoi aku ka mana ma mua o ka wā ma mua e hoʻoponopono i ka hoʻopiha ʻana i nā lua i loko o kahi pūʻulu hoʻonui, Greg Osborn, Synventive Molding Solutions.
4-4:30 p.m.: Nā holomua ma nā hale hana Fiber Laser no nā noi hoʻoheheʻe ʻana i ka palaki, Ben Campbell, ke kumu kōkua o ka ʻenekinia, ke Kulanui ʻo Robert Morris.
4:30-5 pm: Nā mea hou i nā ʻenehana welding plastik: Welding Gas Welding, Anthony Verdesca, Bielomatik Inc.
5-5:30 p.m.: Hoʻokomo ʻia ʻo STRIDE, kahi ala hui no ke kūkākūkā a me ka ʻaelike R&D, Debora Massouda, ʻepekema ʻenehana a me ka noiʻi noiʻi o Delaware (STRIDE)
10-10:30 am: ʻO nā ʻōlelo aʻoaʻo kūpono a me nā hoʻolālā no nā ʻāpana Composite i hana ʻia e ka FDM Process, Vittorio Jaker, Stratasys Inc.
8-9 am: Keynote: Ka lawe ʻana mai i nā mea kanu i hoʻoneʻe ʻia i ka mahiʻai i ka mākeke: nā pilikia a me nā manawa kūpono, William Orts
9-9:30 am: Ke aʻo ʻana o Biodegradable Polybutylene Succinate/Polybutylene adipate-co-terephthalate Blends, Feng Wu, University of Guelph
9:30-10 am: Biodegradation of Biodegradable and Compostable Plastics Under Industrial Compost, Marine and Anaerobic Digestion, Joseph Greene, Kaleponi State University, Chico
10-10:30 am: Tunable Degradation of Polybutylene succinate by Copolymerization and Catalysts, Siwen Bi, Ph.D.Haumana, UMass Lowell
10:30-11 am: Mechanical Behavior and Anaerobic Biodegradation of a PLA Blend Loaʻa ka PLA-co-Polyglycolic acid Copolymer, Christopher Lewis, Rochester Institute of Technology.
11-11:30 am: ʻO ka Haʻahaʻa Haʻahaʻa Haʻahaʻa Depolymerization o PLA, John Campanelli, Zeus Industrial Products
9-9: 30 am: Ka hopena o nā mea hoʻopili pili i ka Fibermatrix Adhesion a me ka hoʻohālikelike o VCF a me RCF Fleece ma Epoxy Matrix, Jasmin Mankiewicz, Ph.D.haumāna, University of Applied Sciences Niederrhein
9:30-10 am: Hoʻokolohua hoʻokolohua e pili ana i ka hoʻokaʻawale ʻana i ka fiber matrix i ka wā o ka hoʻoheheʻe ʻana o nā hale i hoʻoikaika ʻia i ka fiber-reinforced, Christoph Kuhn, Volkswagen AG
10-10:30 am: Nā hopena o nā mea hoʻopihapiha like ʻole ma nā ʻano Thermomechanical a me ka Coefficient o Linear Thermal Expansion of Polypropylene Composite, Mohamed Abdelwahab, University of Guelph
10:30-11 am: Inline UV Light Irradiation of Cellulose and Glass Fibers in Pultrusion of Thermoplastic Composites, Christian Kahl, University of Kassel
11-11:30 am: ʻO ke ʻano o ka waiwai o ka injection molded Hybrid Composites, Gangjian Guo, Bradley University
8-8:30 am: Quantitative Characterization and Modeling of Thin Film Conformability, Alexander Chudnovsky, Kulanui o Illinois ma Chicago
8:30-9 am: Correlation of Chain Dynamics to Mechanical Properties of High-Performance Cross-Linked Systems, Shaw Hsu, University of Massachusetts
9-9:30 am: Ke alualu ʻana i ka lalo o ka ʻāina ikehu: Vapor Deposited Amorphous Fluorocarbons, Gregory McKenna, Texas Tech University
9:30-10 am: Realizing Resource Saving Tire Through Innovative Tough Polymer Composite, Katsuhiko Tsunoda, Bridgestone Corp.
10-10:30 am: Ka hoʻomaopopo ʻana i ke ʻano hoʻololi o nā Nanocomposites me nā Nanotubes Carbon Discrete, Clive Bosnyak, Molecular Rebar Design LLC
10:30-11 am: Ka loiloi nui o Mar Visibility Resistance of Polymer Films, Shuang Xiao, Texas A&M University
11-11:30 am: ʻO ka Mechanical Characterization o ka Polycarbonate Reinforce me ka ulana aniani fiber, Omar Solorza-Nicolas, Instituto Politecnico Nacional/Polimeros Y Compositos SA De CV
8-8:30 am: Hoʻomaikaʻi ʻana i ka hana luhi o nā hui ʻana i nā metala-composite friction spot ma muli o ka manaʻo Weld-bonding, Natalia Manente Andre, Helmholtz-Zentrum Geesthacht
8:30-9 AM: Hoʻopili pololei-Friction Riveting of Metal-CFRP Overlap Joints, Natascha Zocoller Borba, Helmholtz-Zentrum Geesthacht
9-9:30 am: Hoʻopaʻa Paʻa ʻole ʻole o ka Pine e ka Vibrational Welding, Curtis Covelli, Iowa State University
9:30-10 am: Hoʻokolohua hoʻokolohua o ka Amplitude Transmission ma Ultrasonic Welding o Thermoplastic Composites, Genevieve Palardy, Louisiana State University
10-10:30 am: ʻO ke ʻano o ka hoʻoheheʻe ʻana i ka manawa o ka Foam Injection Molded Parts in consideration of Various Fiber Reinforcements and Joint Types, Dario Heidrich, Chemnitz University of Technology.
10:30-11 am: Welding Infrared of Highly Filled Graphite Composite, Martin Facklam, Institute for Plastic Processing
11-11:30 am: Welding Infrared of Continuous Glass-Fiber-Reinforced Thermoplastics: Nā ala e hoʻohana ai i nā Fibers i ka hui, Marios Constantinou, Chemnitz University of Technology.
8-11:30 am: Keynote: Nā mea hou i ka hana ʻana i nā plastik no nā noi mālama olakino, Manish Nandi, Sabic
8:30-9 am: Keynote: Nā hana hou a me nā ʻano i ka Medical Extrusion, Steve Maxson, Graham Engineering
9-9:30 am: Ka Hana ʻana i ka Laser-Based o nā Polymers no nā Lapaʻau Lapaʻau, Roger Narayan, NC State University
9:30-10 am: Micromolding Drug Delivery Devices to Micron Tolerances, Donna Bibber, Isometric Micro Molding Inc.
10-11:30 am: Kūkākūkā Panel: Hoʻomohala a me ka hōʻoia ʻana o ka ʻāpana no nā Mīkini Nui, Matthew Therrien, Rod Brown, Greg Lusardi, Paul Robinson, Brad Smith, Ed Valley, Scott Scully
8-8:30 am: Keynote: Ka hopena o ka wai ma luna o nā ʻano wela a me nā mīkini o kahi Amphiphilic Block Copolymer Membrane, Daniel Hallinan, Florida A&M University a me Florida State University College of Engineering
8:30-9 am: ʻImi ʻImi wela ma waena o ka hoʻoluʻu ʻana a me ka hoʻohui ʻana i ka wela ma nā haʻawina ʻelemakule o Glassy Thermosets, Brendan Ondra, University of Massachusetts–Amherst
9-9:30 am: ʻIke ʻia ka neʻe ʻana o nā ʻāpana i ka wā o ka hana ʻana o ka Polypropylene me nā ʻeke aniani, ʻo Jose Luis Colon Quintana, UW-Madison
9:30-10 am: Ke kuleana o ka hana o ka Nanoclay Particles ma ka Diffusion Properties o Commercial Gasoline Through Polymer Membranes, James Sloan, US Army Research Laboratory
10-10:30 am: Analytical Characterization of Commercial Products: Cool Comfort Technologies for Bedding Products, Praveenkumar Boopalachandran, Associate Research Scientist, Dow Chemical Co.
10:30-11 am: TGA-FTIR Hoʻokuʻu ʻia i ka hope: Hoʻolauna i kahi hoʻohui piha, hoʻololi i ka laina-free hui no ka Evolved Gas Analysis of Polymers, Bob Fidler, NETZSCH Instruments NA LLC
11-11:30 am: Polyetheretherketone (PEEK) Hōʻike i nā wai hoʻopau ZnBr2 ma nā wela kiʻekiʻe a me nā kaomi: ʻike a me ka helu o nā huahana decomposition liʻiliʻi liʻiliʻi, Joseph Baker, Texas A&M University
8-8:30 am: Keynote: Stress-Induced Crystallization in Polypropylene, Pierre Donaldson, Flint Hills Resources
9:30-10 am: Pākuʻi Pākuʻi no ka hoʻonui like ʻana o ka hoʻohaʻahaʻa a me ka paʻakikī i PLA no ka hana hoʻohui, Caroline Multari, ke Kulanui ʻo Lehigh.
10-10:30 am: ʻO kahi ʻano o nā mea hoʻohui soy i nā kiʻiʻoniʻoni Polyethylene ma Bio-based, Peter Perez, UMass Lowell
2:30-3 pm: Hana ʻia ʻo'Z' Aligned Ultrasensitive, Flexible and Transparent Piezoelectric Nanocomposites, Mukerrem Cakmak, Purdue University
1:30-2 pm: Keynote: Design, Engineer, Test, 3D Print for Production – In That Order, Albert McGovern, Shure Inc.
2-2:30 pm: 3 ʻO kou manaʻo: e paʻi a ʻaʻole e paʻi, ʻo ia ka nīnau hana hoʻohui, Jim Allen, 3YOURMIND
3-3:30 pm: Hoʻokaʻawale kūpono ma mua o ka hana ʻana i nā mea hoʻohui: The Art of Leveraging Constraints, Ravi Kunju, Altair
3:30-4 pm: Nā hana maikaʻi loa no ka hoʻolālā ʻana i nā ʻāpana paʻi 3D Plastic, Ashley Eckhoff, Siemens PLM Software
4:30-5 pm: E hōʻoiaʻiʻo ana i ka hilinaʻi mīkini o nā ʻāpana i hana ʻia ma o ka hoʻāʻo ʻana a me ka hoʻohālikelike ʻana, Mark Oliver, ʻenekinia loa.
5-5:30 pm: 3 Degrees: Pehea e hoʻokokoke ai i ka hōʻoia ʻana i nā mea waiwai no nā ʻāpana hana, Mike Vasquez, 3 Degrees
2-2:30 pm: Ka hopena o ka hoʻohui ʻana i ka paʻakai ma luna o nā ʻano hana ʻenehana no ka Polymethyl methacrylate, Masayuki Yamaguchi, Iapana Advanced Institute of Science and Technology.
2:30-3 pm: Synergistic Absorption of Microwave Radiation in PVDF Hybrid Nanocomposites i loaʻa nā Multiwall Carbon Nanotubes a me Ferrite Particles, Uttandaraman Sundararaj, University of Calgary
3:30-4 pm: Rheology ma ke ʻano he mea hana e hoʻomaopopo ai i nā pono Antidrip i nā Flame-Retardant Polycarbonate Resins, Manojkumar Chellamuthu, Sabic
4-4:30 p.m.: Nā Hoʻohālike Waiwai Viscoelastic Nonlinear Me ka Derivative Time Fractal, Donggang Yao, Georgia Institute of Technology
4:30-5 p.m.: Wānana Wehewehe Kaumaha Molecular of Rheology Against Gel Permeation Chromatography for Film Grade Polypropylene, Hoda Bayazian, Paderborn University, Germany
5-5:30 pm: Ka hopena o ke kaumaha o ka Molecular ma luna o nā Dynamics o Linear Isotactic Polypropylene Melt ma nā kiʻekiʻe kiʻekiʻe loa, Martin Zatloukal, Tomas Bata University ma Zlin
5:30-6 p.m.: Ka hopena o nā ʻili oscillating ma ke ʻano Rheological o Thermoplastic Melt, Julius Geis, TU Ilmenau
2-2:30 pm: Ka Hoʻoheheʻe a me ka noho ʻana ma ka Hoʻokuʻu Hoʻokahi-Screw, Clemens Martin Grosskopf, University of Applied Science, Darmstadt, Kelemānia
2:30-3 p.m.: He Haʻawina Hoʻohālikelike Kūʻai Kūʻai Pūnaewele o ke ʻano o ka throughput ma nā hawewe ʻālua pālua, Hans-Juergen Luger, Institute of Polymer Extrusion and Compounding.
3-3:30 pm: Ka hoʻohana ʻana i ke kiʻi paʻi a me ka wela i loko o kahi Extruder no ka hoʻomaikaʻi ʻana / hoʻoponopono i nā hana Extrusion, John WS Lee, LS Cable & System
3: 30-4 pm: Ka Hoʻohālikelike kumukūʻai no ka hoʻokomo ʻana i nā wili hou a me ka Optimized no nā Laina Extrusion Single-Screw, Mark A. Spalding, Dow Chemical Co.
4-4:30 p.m.: He ʻIke Pūnaewele Maʻalahi no ka Screw Extrusion Small and Die, Jingyi Xu, Graham Engineering Corp.
4:30-5 pm: Ka nānā ʻana i ka hoʻohana ʻana i ka mana ma ka wili hoʻoheheʻe: Mono a me Bi-Component Fibers, Javier Vera Sorroche, UMass Lowell
5-5: 30 pm: Ke noiʻi ʻana i nā hopena o nā ʻāpana hana i ka maikaʻi o ka Replication o nā Microstructures i ka Extrusion Embossing o Polycarbonate Films, Florian Petzinka, Institute of Plastics Processing.
5:30-6 pm: Ka hopena o ka hoʻonui ʻana ma luna o ka Thermal Homogeneity a me ka Efficiency Energy in Single-Screw Extrusion, Javier Vera Sorroche, UMass Lowell
1:30-2:30 pm: Keynote: Tan Delta: ʻO ka waiwai ʻole e haʻi iā ʻoe i nā mea āpau e pono ai ʻoe e ʻike e pili ana i kahi mea polymeric, Michael Sepe, Michael P. Sepe LLC
2:30-3 pm: Fractography: The Science and Art of Determining How Plastics Break, Farzana Ansari, Exponent
3-3:30 p.m.: Ka Hana Hana Hana ʻole me ka hoʻohana ʻana iā FT-IR a me Raman Microspectroscopy, Rui Chen, Thermo Fisher Scientific
3:30-4 pm: Pehea e hoʻohana ai i nā ʻano Thermoanalytical no ka ʻike ʻole ʻana, Tobias Pflock, NETZSCH-Gerätebau
4-4:30 pm: Ke noiʻi ʻana i ka hopena o ka Stabilizer System, Medium and Temperature on the Fatigue Crack Growth Resistance of Polypropylene for a Proper Material Selection, Jorg Fischer, Johannes Kepler University Linz, Institute of Polymeric Materials and Testing
4:30-5 pm: Hōʻike ʻia nā ʻano haʻihaʻi o HDPE i ka wai chlorinated, Susan Mantell, University of Minnesota
5-5:30 pm: ʻO ke kū'ēʻana i ka luhi a me ka hōʻoleʻana i keʻano o ka Glass-Fiber-Reinforced PA Grades, Patrick R. Bradler, Johannes Kepler University Linz, Institute of Polymeric Materials and Testing
5:30-6 pm: Raman Spectroscopic Detection of Microscopic Structural Changes in Polyethylene During Photodegradation, Yusuke Hiejima, Ke Kulanui o Kanazawa
6-6:30 p.m.: ʻO kekahi pilikia o ka hoʻoulu ʻana a i ʻole Paneling no kāu mau pūʻolo?, Jay Yuan, Stress Engineering Services Inc.
1:30-2 pm: Keynote: Polyolefin Elastomers: Material Science and End Use Applications, Seema Karande, Dow Chemical Co.
2-2:30 pm: Rheological Methods for Characterizing the Degree of Long Chain Branching in Polyethylene, Greg Kamykowski, SPE
3-3:30 pm: Ka hopena o ka HNTs Dispersion ma PVDF ma ka Morphology a me kona Mechanism Formation of Tensile Fractured Surfaces, Han-xiong Huang, South China University of Technology.
3:30-4 pm: Ka Hoʻoholo ʻana i nā mea ʻaʻa ahi i loko o nā Plastics me ka hoʻohana ʻana i kahi hui o nā ʻenehana Analytical, Yanika Schneider, EAG
4-4:30 pm: Wehe-Cell Foaming o PP/PTFE Fibrillated Composites, Yu Guang Chen, Kulanui o Toronto
4:30-5 pm: ʻO ka Core/Shell Structure of Electrospun Polycarbonate Nanofibers, Yiyang Xu, University of Wisconsin-Madison
5-5:30 pm: Nā hopena o nā mea hoʻohui biodegradable i ka ikaika o ka nucleation a me ka ulu ʻana o ka Isotactic Polypropylene Spherulites, Yousef Mubarak, Ke Kulanui o Ioredane.
5:30-6 p.m.: Hoʻohālikelike ʻana i ke ʻano o ka pellet me ka hoʻohana ʻana i nā pūnaewele neural hohonu, Brenda Colegrove, Dow Chemical Co.
3-4 pm: Pehea ʻo Over the Wall Engineering e pili ana i ka hiki ke kaʻina hana a me ka ikaika o ke kaʻina hana, Suhas Kulkarni, FimmTech Inc.
4-5 pm: Pehea e hiki ai i ka hoʻolālā maikaʻi ke hoʻopaʻa i nā lako, nā mea hana a me nā hiki ke hana, ʻo Vikram Bhargava, ka mea kākau, ka mea aʻo a me ke kūkākūkā.
5-6 pm: ʻO ka hopena o ka hoʻoheheʻe ʻana i ka hoʻoheheʻe ʻana i ka hoʻoheheʻe ʻana ma luna o ka Polycarbonate-Based Material Properties, Jessica Boyer, Covestro LLC
1:30-2 pm: Hoʻomaikaʻi i ka hana o kāu Retort Flexible Film, Sergi Salva Saez, UBE America Inc.
2-2:30 pm: Nā Kalapona Hoʻomaʻemaʻe Hoʻomaʻemaʻe ʻia no nā noi Hoʻopili Meaʻai: He Hoʻopaʻa ʻana no ka EU Compliance, Rijo Jacob Robin, Superior Graphite
2:30-3 pm: Nā Hui Biopolymer no nā noi e koi ana i ka hoʻohaʻahaʻa moana, Stanley Dudek, Polymer Processing Tech LLC
3-3:30 pm: Nā noi hou o Beta Nucleated Polypropylene i loko o ke kiʻiʻoniʻoni, Thermoforming a me nā noi hoʻoheheʻe ʻana, Philip Jacoby, Jacoby Polymer Consulting
4-4:30 pm: Schulamid High-Performance Nylon for Fuel System Applications, Ying Shi, A. Schulman Inc.
5-5:30 pm: Nanolayered Next Generation High-Energy Density Capacitors no nā kaʻa uila, Michel Ponting, PolymerPlus LLC
4-4:30 pm: Laser Welding Plastics: Rapid Prototyping to Mass Production using Quasi-Simultaneous and 2D/3D Mask Welding, Andrew Geiger, Leister Technologies
4:30-5 pm: Nā Pōmaikaʻi o ka Welding Vibration Me IR Preheat, John Paul Kurpiewski, Emerson – Branson
6-6:30 p.m.: Hoʻoheheʻe ʻia ʻo Ultrasonic 20 kHz vs. 15 kHz: Nā pilikia i hoʻokumu ʻia e nā mea Crystalline Highly, Dave Krysiak, Sonics & Materials
8: 30-9 am: Nā pilina pili waiwai o nā microporous membranes i hana ʻia e ka Biaxial Orientation o PP / Nylon 6 Blends, Jingxing Feng, Ph.D.haumāna, Case Western Reserve University
9-9:30 a.
9:30-10 am: Ka hopena o ka hana ʻana a me ka hoʻokumu ʻana i nā waiwai o PP-PET-Blends, Christoph Burgstaller, TCKT
10-10:30 am: Nylon 12 / PMMA / San Alloys no Translucent Medical Catheters, Timothy Largier, Foster Corp.
10:30-11 am: Hoʻolālā o Extensional Flow Static Mixers no ka hui ʻana o Ternary Nanoparticle-Polymer-Polymer Blends, Matthew Thompson, Toray Composite Materials America Inc.
11-11:30 am: Keynote: Biopolymer Alloys and Blends: Past, Present and Future, Roger Avakian, PolyOne Corp.
8-8:30 am: Nā mea hou i loko o nā ʻenehana kaʻa "Nā Mea a me nā Kaʻina Hana," Suresh Shah, Delphi Corp. (Retired)
9-9: 30 am: Low Birefringent Cellulose Acetate Propionate no ka Plastic Display Lens Covers, Laura Weaver, Eastman Chemical Co.
9:30-10 am: Hoʻomaka i ka hoʻohana ʻana i nā mea hoʻohui wela ma ke kukui uila, Paula Kruger, DSM
10-10:30 am: ʻO Resin hou no nā modula hoʻoluʻu wai i loko o nā pahu uila uila, Rudy Gorny, Covestro LLC
10:30-11 am: Hoʻomaikaʻi i ka pale ʻana i ka wā lōʻihi ma nā noi uila, Josh McIlvaine, DuPont Co.
11-11:30 am: Nā holomua i ka Hydrolysis Resistance PBT Resins no nā noi uila me nā mea hoʻohui a me nā mea HEV, Dave Spritzer, DuPont Co.
8-8:30 am: Hoʻomohala ʻana i kahi ʻenehana hoʻoheheʻe ʻana i ka hoʻoheheʻe wela wela a me ka hoʻomaʻamaʻa ʻana i ka ʻōnaehana wela, Cheng-Long Xiao, ke Kulanui o Kina Hema.
8:30-9 am: Simulative Preform Optimization no ka hoʻomaikaʻi ʻana i ke ʻano Topload o nā ʻōmole PET i hana ʻia ma ke kaʻina hana hoʻoheheʻe ʻelua pae, Benjamin Twardowski, IKV Aachen
9:30-10 am: He Kaʻina Hoʻohālikelike no ka Hoʻoheheʻe ʻana: He Hoʻopaʻa Kūʻai Kūʻai no ka Hoʻoheheʻe ʻana i ka ʻŌnaehana Puʻu no nā uhi Puhi, Raghavendra Janiwarad, Sabic
10-10:30 am: Ka Hoʻohālikelike Numerical o ka Shrinkage a me Warpage Deformation o kahi Intermittent-Extrusion Blow Molded Part: Validation Case Study, Zohir Benrabah, National Research Council Canada
8-8:30 am: Hoʻokumu ʻia ʻo Foam and Thermal Comfort in Polyurethane Mattress Foams, Douglas Brune, Dow Chemical Co.
8:30-9 am: ʻO ka wānana o ka Fiber-Reinforced Plastics e noʻonoʻo ana i ka lōʻihi o ka fiber kūloko a me ke kuhikuhi ʻana, Fabian Willems, Institut für Kunststofftechnik
9-9:30 a
9:30-10 am: Crystallization Mechanism of Polyvinylidene Fluoride ma o Nonisothermal Crystallization and Supercritical CO2 Processing, Ji Eun Lee, Ke Kulanui o York
10-10:30 am: Macromolecular Spectroscopy for Determining Mechanical Properties of Polydimethylsiloxane (PDMS), Ahmed Anwer, University of Toronto
10:30-11 am: Nā pilikia kahe e hiki mai ana mai ka hoʻohui ʻana i nā mea biomass i nā plastik, ʻo Carrie Hartford, Jenike a me Johanson.
11-11:30 am: Nā Kaʻina Hana Rotomolding No nā Polyaryl Ketones a me nā Polymers Temperature ʻē aʻe, Manuel Garcia-Leiner, Exponent
8-8:30 am: Hoʻomaikaʻi hou aʻe i ka hana ʻana i nā Semicrystalline a me Amorphous Polymers no ka Thermoforming Sheet i Multiple Nip Systems, Peter Rieg, Battenfeld-Cincinnati
8:30-9 am: Ka hopena o ka Die Exit Stress State, Deborah Number and Extensional Rheology on Neck-In Phenomenon, Martin Zatloukal, Tomas Bata University ma Zlin
9-9:30 am: Microlayered Tubing and Pipes ma o Multilayer Coextrusion, Tyler Schneider, Case Western Reserve University
9:30-10 am: Ke kuleana o ka Crystallization Interfacial i ka hoʻolālā ʻana i nā hui polyolefin mai Mixed Stream Recycle Feeds, Alex Jordan, University of Minnesota
10-10:30 am: Ka Loiloi ana o ka Thermoplastic Polyurethane (TPU) Resins ma ke ano he hiki ke pani i na Resins o keia manawa no na Escalator Handrails, Qingping Guo, EHC Canada
10:30-11 am: Haʻawina mua o ka Birefringence Distribution ma Blown Film, Jin Wang, Dow Chemical Co.
11-11:30 am: Hoʻohana ʻia ʻo Energy Gap Method (EGM) e hoʻomaikaʻi i ka Extrusion Energy Performance: Successful Case Studies, Juan Carlos Ortiz Pimienta, ICIPC (Instituto de Capacitación e Investigación del Plástico y del Caucho)
9:30-10 am: Poly Vinylidene Fluoride/ Graphene Nanoplatelets Composites Me ka Microcellular Structure e hoʻonui ai i ka Electromagnetic Shielding Properties, Biao Zhao, University of Toronto
10-10:30 am: Hoʻonui i ka Electromagnetic Shielding Performance of PVDF/MWCNT Composites Through Foaming, Chenyinxia Zuo, haumāna University of Toronto
10:30-11 am: Piezoelectric Foams Me ke Kiʻekiʻe Thermal Stability and Flexibility, Zhe Liu, Florida State University
11-11:30 am: Resorcinol Formaldehyde Airgel Nanonetwork Structural Assembly a me kona Thermal Properties Correlation, Mohammed Alshrah, University of Toronto
8:30-9 am: ʻenehana hou no ka hoʻomaikaʻi ʻana i ka hana ʻana o ka Halogen-Free Flame-Retardant i ka noi polymer, Ido Offenbach, Evonik
9-9:30 am: ʻO nā Generation Flame Retardants Hou ma muli o ka Ionic Liquids, Yanjie "Jeff" Xu, Inovia Materials LLC
9:30-10 am: Novel Approach to Controlled Migration of Antifog Additives in Multilayer Packaging Films, Michal Schreiber, Tosaf
10-10:30 am: Novel Dispersants Enabled by Natural Oil Metathesis, Frederyk Ngantung, Elevance Renewable Sciences
11:30 am-12 pm: Hoʻonui i ka ʻili ma o Polypropylene Metallic Compounds, Tanmay Pathak, A. Schulman Inc.
8:30-9 am: Keynote: Heat Transfer Modeling in Multilayer Films Used for Flexible Packaging, Dan Ward, NOVA Chemicals
9-9:30 am: Thermo-Rheological Modeling and Simulation of Heat Sealing Process for Multilayer Flexible Packaging Applications, Vinod Kumar Konaganti, Nova Chemicals Corp.
9:30-10 am: ʻO nā mea pale e loaʻa ai ka Layer-like Morphology no ka hoʻohana ʻana i ka Packaging: Extruded Film and Oriented Film, Guojun Zhang, A. Schulman Inc.
10-10:30 am: Keynote: Shifting Marketplace Dynamics and Positioning TPEs for Future Profitability, Diversification and Growth, Robert Eller, Robert Eller Associates LLC
10:30-11 am: Elastic Recovery and Actuation In Polyolefin Thermoplastic Elastomers, Barbara DeButts, Virginia Tech
11-11:30 am: Mai nā Tires Recycled a i nā ʻāpana Plastic: Micronized Recycled Rubbers in Thermoplasitc Polyolefins, Haikun Xu, Entech Inc.
1:30-2 pm: ʻO kahi ʻano hoʻonā i pani ʻia no ka wānana ʻana i ka ikaika o ka ʻāpana hope o ka Fused Deposition Modeling, Steven Devlin, University of Missouri
2:30-3 pm: Hoʻohālikelike a me ka Mechanical Behavior of SLS Processed PA11/CB Nanocomposites, Gabrielle Esposito, haumāna puka, Lehigh University
3-3:30 pm: Ka hopena o ke kaʻina hana o ka Elliptic Smoothness a me nā ʻano o ka pauka i ka hana hoʻohui me ka laser Sintering, Marc Vetterli, Inspire AG ICAMS
3:30-4 pm: ʻO ke ʻano kumu o CLIP 3D Printed Materials, Danielle Grolman, United Technologies Research Center
4:30-5 pm: Ke noiʻi ʻana o kahi Novel Additive Manufacturing Technique "4D-RheoPrinting" no ka hana ʻana i nā huahana Polymeric Enhanced, Alaauldeen Duhduh, Ph.D.haumāna, Lehigh University
5-5:30 pm: Helu Capillary koʻikoʻi i loko o kahi nozzle hoʻohuli ʻana i ka Hyperbolic no ka hana hoʻohui ʻana i ka Polymer-Based Additive Manufacturing, Aditya Sangli, University of Maryland, College Park.
5:30-6 pm: Ke koho ʻana i nā mea waiwai, ka hoʻāʻo ʻana a me ka hōʻoia ʻana o nā mea hoʻohui i hana ʻia, Johannes Wiener, Montanuniversitaet Leoben
6:30-7 pm: Ke noiʻi ʻana i nā ʻāpana Sintering Laser Selective ma nā Tensile Properties o Polyamide 11, Gabrielle Esposito, haumāna puka kula, Lehigh University
2-2:30 pm: Hoʻololi i nā ʻano Rheological a me Crystallization o nā Polymers High-Performance no nā mea hoʻohui Thermoplastic Composite, Sarah Morgan, University of Southern Mississippi
2:30-3 pm: Ke noiʻi ʻana i ke ʻano o ka Viscosity Characterization o ka Glass Mat Thermoplastics (GMT) ma ka Compression Molding System, Chien Tse-Yu, ke Kulanui ʻo Tamkang
3-3:30 pm: Ka ʻike ʻana i nā ala kahe i loko o kahi hui hui Tangential e hoʻomaikaʻi i ka ʻano hui ʻana, Annika Lipski, Institute of Plastics Processing in Industry and the Crafts ma ke Kulanui o ʻenehana ʻo Aachen.
3:30-4 pm: ʻO nā hopena o nā Metal Stearates ma nā ʻano Rheological o ka Powder Injection Molding Feedstocks a me nā ʻāpana ʻōmaʻomaʻo i hoʻoheheʻe ʻia, Michael Shone, UMass Lowell
4-4:30 p.m.: Ka ʻAʻa Kumu o ka Polyolefin-Based Wire and Cable Formulation Die Build-Up, Kurt Koppi, Dow Chemical Co.
4:30-5 pm: Rheological Method Development: Polymer Designs for Blow Molded, Automotive Seatbacks, Mary Ann Jones, Dow Chemical Co.
5-5:30 pm: ʻO ke koʻikoʻi o ke ʻano o ka hōʻike pololei ʻana o nā Rheometers Online i ke kahe kahe ʻana o ka hehee i loko o kahi Extruder, Catherine Lindquist, Dynisco
5:30-6 pm: He Mechanistic Model for Nanocavity Filling, Donggang Yao, Georgia Institute of Technology
1:30-2 pm: Hoʻonui ʻia ka hoʻokō wela ma o ka hoʻopaʻa ʻana o nā Polyethylene-Grapphene Nanocomposites, Brian Grady, University of Oklahoma
2-2: 30 pm: Ka Hoʻoponopono ʻana i nā Parameter Ka hopena ma nā ʻano pale o ka Nitrile-Based Nanocomposite Membrane, Mohamed Zemzem, Ph.D.haumāna, École de Technologie Supérieure
2:30-3 pm: Hōʻikeʻike i nā ʻano ʻōpala o nā ʻāpana kaʻa multilayer no nā kūlana ʻōpala like ʻole, Sung Wook Moon, Ke Kulanui o Korea.
3-3:30 pm: ʻO Biomimetic Nanocoatings Me nā Mechanical Kūʻokoʻa, Paʻa a me nā ʻAi ʻAi ʻAi ʻAi ʻAi Mai ka Large Scale One-Step Coassembly, Luyi Sun, University of Connecticut
3:30-4 pm: Hoʻolālā o ka Micro- And Nano-Layer Structure a me kona mau pono hana o nā Polymers, Shaoyun Guo, Polymer Research Institute o ke Kulanui ʻo Sichuan.
4-4:30 pm: Ke hoʻohana nei i nā pūʻali Capillary i loko o nā Plastics i hoʻopiha ʻia: nā mea uila uila ma o ka hoʻopaʻa ʻana i ka mea hoʻopiha keleawe me ka mea hoʻoheheʻe ʻia, Derrick Amoabeng, ke Kulanui o Pittsburgh.
4:30-5 pm: Microcapillary Film Membranes ma muli o Polyvinylidene Fluoride, Gerald Billovits, Dow Chemical Co.
5-5:30 pm: Hoʻohālike helu o Parison paʻakikī a me ka hoʻokumu ʻana i ka pepa i nā kaʻina hana Blow Molding me ka hoʻohana ʻana i ka polokalamu BlowView, Zohir Benrabah, National Research Council Canada
5:30-6 pm: Pehea ka hopena o ka Polymer Rheology i ka Extrusion Blow Molding Process, Todd Hogan, Dow Chemical Co.
6-6:30 pm: Synergistic Reinforcing and Toughening High Density Polyethylene ma ka hoʻolauna ʻana i Dynamic Shear Force Field a me Ultrahigh Molecular Weight Polyethylene, Tong Liu, Ke Kulanui o ʻenehana ʻo Kina Hema
6:30-7 pm: Nā hopena o ka Extruder Screw Configuration on Thermal Properties of Glass-Fiber-Reinforced Polyamide 6 Composites ma ke kaʻina hana Thermoplastics Direct Long-Fiber-Reinforced Thermoplastics, Takashi Kuboki, University of Western Ontario
1:30-2 pm: Unified Simulation of Extrudate Distortion Ma muli o ka Nonuniform Exit Velocity and Cooling Shrinkage, Mahesh Gupta, Plastic Flow
2-2:30 pm: Hoʻohālike i kahi ʻano helu helu maʻalahi no ka hoʻokō ʻana i nā kahe keʻa i ka hoʻolālā Extrusion Die ma muli o ka manaʻo pūnaewele, Bianka Jacobkersting, University of Paderborn.
2:30-3 pm: Hoʻohālike i ka hana hoʻohaumia ʻana o nā kānana hoʻoheheʻe polymer a me nā hoʻohālikelike ʻana o ka nalo ʻana o ke kaomi o ka Media Filtration, Volker Schöppner, University of Paderborn.
3-3:30 pm: Hoʻokolohua hoʻokolohua e pili ana i ka Melt Encapsulation: He ʻike o ka Die Pressure a me ka hoʻoponopono hou ʻana, Christian Hopmann, Institute of Plastics Processing (IKV) i ka ʻoihana a me nā hana akamai ma RWTH Aachen University
3:30-4 pm: ʻO ka hopena o ka Curvature Channel ma ke kahe kahe a me ka hoʻoheheʻe ʻana o nā wai mana-law, Wolfgang Roland, Institute of Polymer Extrusion and Compounding
4-4:30 pm: He Ke Ana Hoʻohālike Heuristic no ka wānana ʻana i nā kahe ʻekolu-dimensional non-Newtonian i loko o nā kahawai ana, Christian Marschik, Institute of Polymer Extrusion and Compounding
4:30-5 pm: Hoʻohālike i ka hana hana o Melt Filtration in Polymer Recycling, Sophie Pachner, Institute of Polymer Extrusion and Compounding
1:30-2 pm: ʻO ka ʻike ʻana i ka anomaly aunoa a me ka nānā ʻana i ke kumu kumu no ka nānā ʻana a me ka mālama ʻana i ke kaʻina hana holoʻokoʻa ma ka hoʻoheheʻe ʻana, Alexander Schulze Struchtrup, University of Duisburg-Essen
2-2:30 pm: Ka Hoʻoulu ʻana o ka Inflation o Preforms i ke kaʻina hana hoʻoheheʻe kūikawā GITBlow Hoʻohui ʻana i ke kinoea kōkua hoʻoheheʻe ʻia a me ka puhi ʻana, Björn Landgräber, Ke Kulanui ʻo Paderborn
2:30-3 pm: Ka hopena o ke kūlana hoʻoheheʻe ʻia ma ka hoʻopili ʻana i ka mold i ka wā o ka Thermoplastic Polyurethane Injection Molding, Jian-Yu Chen, Feng Chia University
3-3:30 pm: Hoʻokūpaʻa ʻia o ka BMC Injection Molding e nā Hana Mana Mana, Nicolina Topic, KraussMaffei Technologies GmbH
3:30-4 pm: ʻO ka hana ʻana o Zero Defect i ka Injection Compression Molding of Polymer Fresnel Lenses, Dario Loaldi, University Technical University of Denmark
4-4:30 pm: Hōʻikeʻike 3D Surface o Etched, Injection Molded Parts Before a Follow-Up Electroplating Process, Jens P. Siepmann, University of Duisburg-Essen
4:30-5 pm: Multilayer Injection Molding of Thick-Walled Optics using Dynamic Mold Tempering and Optimized Layer Thickness Distribution, Malte Röbig, Institute of Plastics Processing (IKV) in Industry and the Skilled Crafts at RWTH Aachen University
5-5:30 pm: Ke hoʻohana nei i ka Levitation Magneto-Archimedes no ka ʻike ʻole ʻana o nā ʻāpana i hoʻoheheʻe ʻia, Peng Zhao, ke Kulanui ʻo Zhejiang.
5:30-6 pm: Hōʻoiaʻiʻo o ka helu a me ka Practical Approach i ka hoʻokō ʻana i ka PVT Properties of Polymer to Control to Control Shrinkage Quality of Molded, Tzu-Hsiang Wei, Ph.D.haumāna, Chung Yuan Christian University
1:30-2 pm: Keynote: Medical Tubing Process Optimization With Simulation, John Perdikoulias, Compuplast International Inc.
2-2:30 pm: ʻEnekinia Pūnaehana no ka Hoʻomohala ʻana i nā Mea Lapaʻau: Noi i nā Pumps Insulin, Marc Horner, Ansys Inc.
2:30-3 pm: Nā hopena o ke Kaiaola Ola ma Thermoplastic Polyurethanes, Ajay Padsalgikar, Abbott
3-3:30 pm: Ka helu ʻana no nā ʻokoʻa i ka Modulus a me ke ʻano hoʻomaha hoʻomaha i ka Plastics e hoʻāʻo ana i ka hoʻāʻo ʻana i ke kino, Mark Yeager, Covestro LLC
3:30-4 pm Nā Huahana Hoʻohaʻahaʻa o nā Lapaʻau Lapaʻau i loko o nā Kaiapuni Kūlohelohe Paʻakikī: Nā Hoʻolālā Hoʻolālā Hoʻopilikia, Adam Kozak, Cambridge Polymer Group
4-4: 30 pm: Hoʻonui i ka ʻelemakule o nā resins Lapaʻau-Grade: Q10 Factors and Material Aging Models, Rob Klein, Stress Engineering Services
4:30-5 pm: Nā ʻili polimer i hana ʻia no ka hana ʻoi aku ka maikaʻi ma nā noi lāʻau lapaʻau, Prakash Iyer, Inhance Technologies
5-5:30 pm: Supercritical Carbon Dioxide Assisted Extrusion of Graphene Nanofiller Reinforced Polymers for Biomedical Applications, Austin Coffey, Waterford Institute of Technology
5:30-6 pm: ʻO ka hoʻoponopono ʻana o ka Micro-Super-Hydrophobic Silicone Rubber i ka ʻano o ke kanaka Lens Epithelial Cells, Liuxueying Zhong, State Key Laboratory of Ophthalmology, Zhongshan Ophthalmic Center, Sun Yat-sen University, Guangzhou
2-2:30 pm: ʻO ka ʻike wikiwiki ʻana i ka ʻike ʻana iā Asa Polymer UV Resistance: Xenon vs. Quv vs. Florida and Arizona, Steven Blazey, A. Schulman Inc.
2:30-3 pm: ʻO ke koʻikoʻi o ke ʻano o ka hōʻike pololei ʻana o nā Rheometers Online i ke kahe kahe o ka hehee ma kahi Extruder, Catherine Lindquist, Dynisco
3-3:30 pm: ʻO ke ʻano o ka Cure of Polymeric Material by Dielectric Analysis (DEA), Yanxi Zhang, Netzsch Instruments North America LLC
4-4:30 pm: Leveraging Advanced Edge Analytics for Improved Fault Detection in Discrete Manufacturing Processes, Andrew Wilson, MKS Instruments Inc.
5-5:30 pm: 3D Line Confocal Imaging: New High-Resolution Sensor Technology for Challenging Online and Offline Plastic Ana Applications, Juha Saily, FocalSpec Inc.
1:30-2 pm: Towards a Lightweight Ontology: Carbon to Building, Mark Goulthorpe, Massachusetts Institute of Technology
2-2:30 pm: Loaʻa i ka International Building Code Recognition of Polymeric Building Materials: Fire Performance Requirements, Nicholas Dempsey, Worcester Polytechnic Institute
2:30-3 pm: Ka hoʻolālā ʻana no ka palekana ahi: nā noʻonoʻo no ka hoʻomohala ʻana i nā huahana, Christine Lukas, Dow Chemical Co.
3-3:30 pm: No ka hoʻolālā akamai o nā huahana polymeric palekana ahi, Stanislav Stoliarov, University of Maryland
3:30-4 pm: Hoʻohui ʻia ʻo Polymer Composite no nā ʻĀina Kivila, Hota Gangarao, Ke Kulanui ʻo West Virginia.
4-4:30 pm: Kūkākūkā Panel: Ka palekana a me ka hoʻomau i ke kūkulu ʻana: nā pilikia a me nā manawa kūpono no nā plastik.
4:30-5:30 pm: Keynote: Design Knock-Down Factors on Polymer Composites Under Harsh Environments, Hota Gangarao, University of West Virginia
6-6:30 pm: ʻO ke kumu hoʻohālikelike ʻino no ka Aluminum e ka Sodium Carboxymethyl Cellulose (Polymer) In Acidic Solution, Macdenis Egbuhuzor, University of Nigeria Nsukka
8-8:30 am: One-Step Electrochemical Treatment of Metal Inserts for Tight Polymer-Metal Hybrid Applications, Tobias Kleffel, Institute of Polymer Technology
8:30-9 am: Nā hopena o ka hoʻoponopono ʻana i nā ʻano like ʻole ma nā Phases Crystallization o PVDF-TRFE-CFE Thin Films, Hao Pan, UMass-Lowell
9-9:30 am: New Transparent High-Heat Polycarbonate Copolymer Resins for Thermo-Optical Applications, Mark Van Der Mee, Sabic
10-10:30 am: Biochar/Ultrahigh Molecular Weight Polyethylene/Linear Low Density Polyethylene Composites for Electromagnetic Interference Shielding, Suiyi Li, University of Wisconsin--Madison
10:30-11 am: Thermoelectric Properties of Open Cellular Polymer Templates Coated With 1D and 2D Carbon-Based Nanoparticles, Siu Ning (Sunny) Leung, York University
7:30-8 am: Hoʻopōʻino i ka ʻili o ka ʻili o nā mea hoʻohui PDMS Fiber pōkole, Reza Rizvi, University of Toledo
8-8:30 am: ʻO ka hopena o ka Hygrothermal Aging ma nā mea waiwai o nā Thermoplastics Fiber-Reinforced Endless, Matthias Huettner, University of Paderborn.
8:30-9 am: Ka Hoʻoikaika o ka Fiber-Matrix-Interaction ma ka Fracture Behavior of Regenerated Cellulose Fiber-Reinforced Polypropylene, Jan-Christoph Zarges, University of Kassel
9-9:30 am: Ka hopena o ka hoʻomaloʻo ʻana i ka Morphology o Dried Cellulose Nanocrystals (CNCs) a me ka Tensile Properties o Poly(lactic) Acid-CNC Composites, Nicole Stark, USDA Forest Service, Forest Products Lab
9:30-10 am: Nā hopena o Trisnonylphenyl Phostite ma ka Mechanical Property of Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate), Takashi Kuboki, University of Western Ontario
10-10:30 am: Hiki i ka Biocarbon ke hoʻoikaika no ka PBT i nā noi kaʻa, Boon Peng Chang, University of Guelph
10:30-11 am: Crystallization Behavior of PLA Composite Nanofibers by Annealing, Jian-hua Hou, Zhengzhou University
8:30-9 am: ʻOi aku ka ʻoi aku ka ʻoi aku ka maikaʻi: ʻO ka hihia no nā Thermoplastics-Fiber-Filled Carbon, Philip Schell, Zoltek.
9-9:30 am: He Novel High-Performance Chopped Strand Glass Fiber for Reinforcing Polypropylene-ThermoFlow 641, Derek Bristol, Johns Manville
10-10:30 am: Fundamentals and Emerging Technologies of Fiber Sizing and Interfacial Adhesion, Steve Bassetti, Michelman Inc.
11-11:30 am: Affordable Recycled Carbon Fiber for Additive Manufacturing (3D Printing) and Automotive Thermoplastics, Andrew Maxey, Vartega Inc.
8-8:30 am: Nā ʻenehana paʻi kikohoʻe no nā Plastics: E nānā i ka Inkjet kala a me ka hōʻailona Laser, Scott Sabreen, The Sabreen Group
9:30-10 am: Nā noi no ka ʻenehana eBeam Curing ʻenehana haʻahaʻa i nā mea kūʻai aku i nā mea hoʻopili hoʻopili maʻalahi, Anthony Carignano, eBeam Technologies
10-10:30 am: Koho ʻeleʻele ʻeleʻele no ka holomua ma o ka hoʻouna ʻana i ka welding laser a me ka hui ʻana, Scott Sabreen, The Sabreen Group;ʻO Avraham Benatar, ke Kulanui o Ohio State
8-8:30 am: Keynote: All Encompassing Extrusion Technology for Producing a Wide Spectrum of Simultaneously Bioriented Films, Adolfo Edgar, Kuhne Anlagenbau GmbH
9-9:30 am: ʻIke ʻia ʻo New Surface Treatment Protocol no ka Extrusion Coating, Rory Wolf, ITW Pillar Technologies.
10-10:30 am: Nā Kiʻiʻoniʻoni Biaxially Oriented Polyethylene (BOPE) i hana ʻia ma ke kaʻina hana Tenter Frame a me nā noi ʻana, Yijian Lin, Dow Chemical Co.
10:30-11 am: Biaxially Oriented Barrier Film (BOPP) Me Nanostructured Additives, Krishnamurthy Jayaraman, Michigan State University
11-11:30 am: ʻO ke ala e ana i ka paʻa o ka oxygen i loko o ka Packaging Flexible Sealed, Alejandro Serna, ICIPC
8-8:30 am: Deformation a me Stress Prediction o Injection Molded Components Ma hope o ka kau ʻia ʻana i kahi kūlana i hoʻolālā ʻia, Zhiliang Fan, Moldflow R&D Center, Autodesk
8:30-9 am: ʻO ka Moldflow Optimization o nā Microcavities e hoʻopiha ana i ka wā o ke kaʻina hana injection, John Coulter, Lehigh University
9-9:30 am: Ke aʻo hohonu ma CAE Ma muli o ka hoʻohui ʻana o ka Taguchi Method a me Neural Network, Yu-Wei Chen, Chung Yuan Christian University
9:30-10 am: Pehea e hoʻohana ai i ka CAE no ka ʻike ʻana i ka pilikia ma lalo o ka hana o ka mīkini i loaʻa i ka hoʻoheheʻe ʻana i ka hoʻoheheʻe ʻana i ka hoʻokūkū hoʻokūkū, Chao-Tsai Huang, ke Kulanui ʻo Tamkang.
10-10:30 am: Ke hoʻohana nei i ka Anisotropic Rotational Diffusion Model e hoʻomaikaʻi i ka wānana o nā pulu pōkole i ka Thermoplastic Injection Molding, Alexander Bakharev, Autodesk
10:30-11 am: Empirical Modeling and Simulation of the Microstructure Replication in Injection Molding, Torben Fischer, Institute of Plastics Processing (IKV) ma RWTH Aachen University
11-11:30 am: ʻO ke aʻo ʻana o ka hoʻomaʻamaʻa ʻana i ke kaʻina hana hoʻoheheʻe ʻana no ka 0.6mm Thin Polymeric Microfluidic Chip, Ge Chen, Singapore Institute of Manufacturing Technology.
8:30-9 am: Plenary: ʻO nā hōʻaiʻē noiʻi no ka ʻoihana Plastics, Michael Devereux, Mueller Prost CPAs + Nā Kūkākūkā Pāʻoihana
9-9:30 am: Ka hopena o nā ʻāpana ʻokoʻa ʻokoʻa i ke kū ʻana i ke kahe i loko o ka hoʻoheheʻe ʻia ʻana o nā ʻāpana Polystyrene, Marco Sorgato, University of Padova.
11-11:30 am: Hoʻololi i nā Molds no ka hoʻomohala ʻana o ka mea kūʻai aku / Prototype, Tom Worcester, Meusburger USA
8-8:30 am: Ka hopena o ka nui o ka pua ma nā Elastomeric Nanocomposite Foams ma muli o ka Polyisoprene Rubber, Ali Vahidifar, University of Bonab
8:30-9 am: Ka hopena o nā ʻāpana palupalu a me nā mea hana nucleation ma nā waiwai o ka Thermoplastic Polyurethane Foam, Shu-Kai Yeh, National Taiwan University of Science and Technology.
9-9:30 am: Noʻonoʻo a me ka hoʻokolohua hoʻokolohua o ka ulu ʻana o ka Bubble ma ka High-Pressure Foam Injection Molding, Chongda Wang, University of Toronto
9:30-10 am: Hoʻoikaika ʻia ka Paʻa Paʻa ʻana o ka Linear Polymer e ka Heat-Shrinking Fibers, Sundong Kim, University of Vermont
10-10:30 am: Hoʻonui i ka Electromagnetic Shielding Performance of PVDF/MWCNT Composites Through Foaming, Chenyinxia Zuo, University of Toronto
10:30-11 am: Piezoelectric Foams Me ke Kiʻekiʻe Thermal Stability and Flexibility, Zhe Liu, Florida State University
11-11:30 am: Resorcinol Formaldehyde Airgel Nanonetwork Structural Assembly a me kona Thermal Properties Correlation, Mohammed Alshrah, University of Toronto
9-9:30 am: Wearable Insulin Pumps: Hoʻolālā a me ka hoʻohana ʻana i kēlā me kēia lā i ka wānana hana, Hossam Metwally, Ansys Inc.
9:30-10 am: He Hoʻolālā Hou o nā Siloxane Organo-Modified Functionalized no ka mālama ʻana i nā ʻāpana a me nā mea hoʻopihapiha, Ido Offenbach, Evonik
10-10:30 am: ʻO ka māmā māmā me ka hoʻohaʻahaʻa ʻana i ka Density Polyamide Blends, Ying Shi, A. Schulman Inc.
10:30-11 am: Xenoytm ENH2900 no ke Kiʻekiʻe Kemika Kūʻai & Non-Br/Cl FR Applications, Emily He, Sabic
11:30 am-12 pm: Nā Hoʻoponopono Hoʻohālikelike maoli me ka hoʻohana ʻana i ka FEA no ka hoʻolālā ʻana, ka hoʻolālā ʻana a me ka hana ʻana o nā Plastics, Arindam Chakraborty, Virtual Integrated Analytics Solutions.
1:30-2 pm: Hoʻohui ʻana i ka Rheology o nā Elastomers Polyolefin i ka Hoʻopuehu ʻana i loko o kahi Polypropylene Matrix ma o ka hoʻohālike ʻana a me nā hoʻokolohua me nā kahua kahe maʻalahi, Jeff Munro, Dow Chemical Co.
2:30-3 pm: Manaʻo Kūlohelohe Wai no ke Kaʻina Pushback i loko o ka wai-assisted injection Molding, Jim Hsu, CoreTech System
3-3:30 pm: Pehea e kōkua ai nā Plastics e lanakila i nā pilikia hou o ka uila uila, Werner Posch, Draexlmaier Group
3:30-4 pm: Hoʻomohala ʻana i nā Composites Polyolefin haʻahaʻa haʻahaʻa no nā ʻenehana kaʻa, Tanmay Pathak, A. Schulman Inc.
4-4:30 pm: Ka hopena o ke ʻano o ka palaoa a me ka maʻiʻo Talc ma luna o nā ʻano Scratch a me Mar o Textured Thermoplastic Olefins, Shuoran Du, Texas A&M University
4:30-5 pm: ʻO ka māmā māmā a me ka maikaʻi o Crashworthiness: Plastics and Hybrid Solutions, Fred Chang, Sabic
5-5:30 p.m.: He Hui i hoʻohui ʻia i ke aniani no nā ʻāpana o loko o nā kaʻa, Cheolhee Park, GS Caltex.
5:30-6 pm: Bumper to Bumper: Wehe i nā mea haumia mai nā ʻāpana palaki i hana ʻia me ka hau maloo, Steve Wilson, Cold Jet LLC
1:30-2 pm: Synthesis, Characterization and Water Application of Microcellular Injection Molded PPGMA/MMT Nanocomposites, Shyh-Shin Hwang, Chien Hsin University of Science and Technology
2-2:30 pm: Hoʻomākaukau ʻana i nā Polypropylene Single-Polymer Composites Me Graphene Nanoplatelets e Film-Stacking, Mingwang Shao, Beijing Institute of Technology.
2:30-3 pm: Hoʻokaʻawale i ka hopena o ka hui ʻana o ka Polymer-Filler Interaction ma ka Hoʻonui ʻia ʻana o ka waiwai ʻo Polymer Composite: The Example of Polypropylene/Halloysite Hybrids, Tong Wei, Northwestern University
3-3:30 pm: Nā haʻawina helu a me nā hoʻokolohua e pili ana i ke kahe a me ka Warpage i ka wā o ke kaʻina hana hoʻololi Resin, Sejin Han, Autodesk
3:30-4 pm: Kū'ē Kiʻekiʻe Fracture, Filler Adhesion and Dispersion in Epoxy Carbon Nanofiber Composites, Muhammad Anwer, University of Toronto
4-4:30 pm: Hoʻomohala ʻana i ka Ultrasonic Processing o CNT Nanopaper/Solventless Epoxy Prepreg, Dan Zhang, Ke Kulanui o Ohio State
4:30-5 pm: In Situ Vitamin C Reduction of Graphene Oxide no ka hoʻomākaukau ʻana i nā Nanocomposites TPU Flexible Me ka ʻae Dielectric Kiʻekiʻe, Han-xiong Huang, Ke Kulanui o ʻenehana ʻo Kina Hema
2-2:30 pm: Induction Heat Cool With Sabic Resins: He Intro to High-Definition Plastics, Jos van Gisbergen, Sabic
4-4:30 pm: "Smart Factories": ʻO ka wā e hiki mai ana o nā Plastics Production me 4.0 Connectivity and Condition Monitoring System (CMS), Markus Klaus, Wittmann Battenfeld
4:30-5 pm: Hoʻomaikaʻi i ka pololei o ka hoʻopiha piha ʻana i nā hoʻohālikelike me nā ʻikepili hoʻokolohua mai ka wikiwiki scanning chip Calorimetry, Anne Gohn, Penn State University
5-5:30 pm: ʻO nā ʻāpana hoʻoheheʻe injection me ka mea hoʻohālikelike i paʻi ʻia a pau-inkjet i hoʻohui ʻia no ka nānā ʻana i ke kūlana, Thomas Mitterlehner, Ph.D.haumāna, Johannes Kepler University Linz
1:30-2 pm: ʻenehana hou i ka nonhalogen Flame Retardants: Oxyimides, Rudolf Pfaendner, Fraunhofer Institute
2-2:30 pm: Nā ala i ka hoʻolaha ʻana o NHFR Technologies: A European Perspective, Maryline Desseix, PolyOne Corp.
3-3:30 pm: Toward a Carbon to Building Concept: The Material and Assembly Challenges, Mark Goulthorpe, Massachusetts Institute of Technology
3:30-4 pm: Loaʻa i ka International Building Code Recognition of Polymeric Building Materials: Challenges for Material and Assemble Designers, Nicholas Dempsey, Worcester Polytechnic Institute
4-4:30 pm: ʻO nā mea pale ahi i nā huahana mea kūʻai aku: Nānā a me ka nānā ʻana i ka pāpā CPSC i manaʻo ʻia, Jared Schwartz, Exponent;ʻO Andrew Worthen, Exponent
4:30-5 pm: Hoʻomohala a me ke kālepa ʻana o NHFR Technologies, Nicholas Dempsey, Worcester Polytechnic Institute;Maryline Desseix, PolyOne;Mark Goulthorpe, Massachusetts Institute of Technology;Gordon Nelson, Ke Keʻena ʻenehana ʻo Florida;Rudolf Pfaendner, Fraunhofer Institute;ʻO Jared Schwartz , Exponent;ʻO Andrew Worthen, Exponent
1:30-2 pm: Hoʻohālike i ka Doming Deflection of Caps and Closures With Finite Element Method, Wenbo Xu, Dow Chemical Co.
2-2:30 pm: Quasi-Static, Nonlinear, Explicit Finite Element Analysis of Small PET Bottles, Naser Imran Hossain, Niagara Bottling
2:30-3 pm: Hoʻolālā no ka Hana Hana: 3D-CAD Design Methodology for Spiral Milled Polymer Processing Tools, Phil Hungenberg, Universität Duisburg-Essen
3-3:30 pm: Hoʻolālā Huahana Ma muli o ka ʻike a me ka hoʻolālā ʻana i nā ʻāpana i hoʻoheheʻe ʻia, Rene Andrae, University of Duisburg-Essen.
3:30-4 pm: Ka Hoʻoikaika o ka Lapaʻau Thermal ma nā ʻano Mechanical of Thermoplastic Composite i loaʻa e ka Large-Format 3D Printing Process, Miguel A. Hidalgo Salazar, Universidad Autónoma de Occidente
4-4:30 pm: ʻAe, hiki iā ʻoe ke uhaki i kekahi mau lula hoʻolālā a loaʻa i kahi huahana kūleʻa: ʻo ka nānā pono ʻana i nā hopena, ʻo Vikram Bhargava, ka mea kākau, ka mea aʻo a me ka mea aʻoaʻo.
4:30-5 pm: Polypropylene/ Polyvinylidene Fluoride Fibrous Water/Fuel Filters i Hana ʻia e kahi Unique Multilayer Co-Extrusion Process, Cong Zhang, Case Western Reserve University
5-5:30 pm: Ka Loctite Loctite HY4060GY: ʻO ka hoʻololi kūpono no nā Epoxies 2K 5-Minute Kuʻuna, Matthew Miner, Henkel
5:30-6 pm: Ke hoʻohana nei i nā kumukūʻai no ka hoʻopili ʻana i nā Millennials ma kahi hana, Laurel Bougie, aPriori Technologies
1:30-2 pm: Ka Hoʻoikaika ʻana o nā Kaʻina Hana Hoʻohui i ka Dispersion a me nā waiwai waiwai o nā Graphene-Based PP Composites me ka hoʻohana ʻana i kahi Twin-Screw Extruder ma lalo o nā kūlana pili i ka ʻoihana, Maximilian Adamy, IKV Aachen
2:30-3 pm: He noi no ka Thermoplastic Polyurethane Foaming ma Handrail Extrusion, Qingping Guo, EHC Canada
3-3:30 p.m.: Ho'āʻo Flexural o PET-NanoFiber a me PP Foamed Composites, Lun Howe Mark, Kulanui o Toronto
3:30-4 pm: Mālama ʻia ʻo Biofilm Growth i Macroporous Polyvinilidene Fluoride Carriers for Biological Organic Removal From Municipal Wastewater, Pardis Ghahramani, Ph.D.haumana, Ke Kulanui o Ioka
4-4:30 pm: Hoʻoponopono i ka hopena a me ka pale ʻana no ka pāʻani ʻana i nā ʻili me ka hoʻohana ʻana i ka polyolefin particle foam i hoʻonui ʻia: nā mea hou a me nā hoʻolālā, Steven Sopher, JSP International
4:30-5 p.m.: ʻO nā ʻūhā ʻoi loa o ka Nanocrystalline Cellulose i hoʻoikaika ʻia me ka waiʻona Polyvinyle, Nahal Aliheidari, ke Kulanui Mokuʻāina ʻo Wakinekona.
5-5:30 pm: He Pūnaehana no ka ʻike ʻana a me ke ana ʻana i ke koʻikoʻi o nā kahe plastik ma lalo o nā kūlana shear, Taylor Ducharme, University of Vermont
5:30-6 p.m.: Ka ʻili ʻana i ka waiwai mai nā loko wai ʻaila Sands, Pavani Cherukupally, Kulanui o Toronto.
6-6:30 pm: Nā Polyamide Viscous Nui i hana ʻia me ka Cast Polyamide 6 Recyclates, Benjamino Rocco Formisano, Institut für Kunststofftechnik-University of Stuttgart
2:30-3 pm: Nylon 6/6 Rich Co- a me nā Terpolymers: Pehea ka hoʻoponopono ʻana i ke ʻano wela e hoʻonui ai i ka hana a hiki i nā wahi noi hou, Jacob Ray, Ascend Performance Materials
3-3:30 pm: He Papa Hou o ka High Melt Strength Polystyrene no ka XPS Foam Market, Ted Harris, Total Petrochemicals and Refining USA Inc.
4: 30-5 pm: Nā Pūʻulu Hoʻokuʻu Haʻahaʻa: Nā Kūlana Kaʻa a me nā noi, Tanmay Pathak, A. Schulman Inc.
5-5:30 pm: Hoʻonui i nā kiʻiʻoniʻoni palekana me nā Cyclic Olefin Copolymers, Paul Tatarka, Topas Advanced Polymers Inc.
1:30-2 pm: Ka hopena o ke kinoea-counter pressure ma ke ʻano o ka hoʻoulu ʻana a me ka cell mophology o Flexible Polyurethane Foam, Daniel Schneider, Institute of Plastic Processing ma RWTH Aachen University
2:30-3 pm: New Generation HDPE for Pressurized Applications: Beyond Pe100, Jonathan Rabiei Tabriz, Sabic Petrochemicals
3-3:30 pm: SABIC Solutions no ka hoʻomaʻemaʻe pilikino: Nā ʻoihana a me nā makana a me nā hoʻomohala SABIC, Jelena Bozovic-Vukic, Sabic
5-5:30 pm: ʻO ke kukui: ʻO ka mea hana hou no ka hoʻolālā māmā, Brian Haggart, Ineos Styrolution
He manaʻo kou e pili ana i kēia moʻolelo?Loaʻa iā ʻoe kekahi mau manaʻo āu e makemake ai e kaʻana like me kā mākou poʻe heluhelu?Makemake ʻo Plastics News e lohe mai iā ʻoe.E leka uila i kāu leka iā Lunahooponopono ma [email protected]
Hoʻopili ʻo Plastics News i ka ʻoihana o ka ʻoihana plastik honua.Hōʻike mākou i nā nūhou, hōʻiliʻili i ka ʻikepili a hāʻawi i ka ʻike i ka manawa kūpono e hāʻawi i kā mākou poʻe heluhelu i ka pono hoʻokūkū.
Ka manawa hoʻouna: Oct-27-2020