ka lebaka la ts'ehetso e ntle haholo, mefuta e fapaneng ea thepa ea boleng bo holimo, litšenyehelo tse mabifi le ho fana ka thepa e ntle, re rata lebitso le letle har'a bareki ba rona.Re k'hamphani e mahlahahlaha e nang le 'maraka o pharaletseng oa 100% Original Speed Plastic Pe Hdpe Single Double Wall Corrugated Pipe Extrusion Production Machine Line, Ho bona ho lumela!Re amohela ka tieo litebello tse ncha tsa kantle ho naha ho theha litšebelisano tsa lik'hamphani hape re lebelletse ho kopanya litšebelisano le bareki bohle bao e leng khale ba thehile.
ka lebaka la ts'ehetso e ntle haholo, mefuta e fapaneng ea thepa ea boleng bo holimo, litšenyehelo tse mabifi le ho fana ka thepa e ntle, re rata lebitso le letle har'a bareki ba rona.Re k'hamphani e matla e nang le 'maraka o pharaletseng bakeng saMochini oa Lipeipi o Kentsoeng, Mochini oa liphaephe oa Hdpe o Kentsoeng, Mochini oa Lipeipi oa Sesete, Feela bakeng sa ho finyella sehlahisoa sa boleng bo botle ho finyella tlhokahalo ea bareki, thepa eohle ea rona e hlahlobisitsoe ka thata pele e romelloa.Re lula re nahana ka potso ka lehlakoreng la bareki, hobane u hlōla, re hlōla!
Mochini oa lipeipi tse entsoeng ka makotikoti oa Double Wall o boetse o rehiloe Mochini oa ho Etsa Liphaephe tsa Culvert, o amohela mokhoa oa ho hlahisa le ho theha, o na le likarolo tsa boleng bo tšepahalang le ts'ebetso e phahameng.Ha ho bapisoa le sebopeho se seng sa lebota la phala ea polasetiki, phala e nang le marako a mabeli e na le moralo o motle oa sebopeho sa lebota, boima ba eona bo tlase bo fihla ho theko e tlase ea tlhahiso le ho ntlafatsa tlholisano ea 'maraka.E sebelisoa haholo libakeng tse fapa-fapaneng ho e-na le phala ea konkreite le liphaephe tsa tšepe, hobane e na le likarolo tse babatsehang tse kang: ho hokahanngoa habonolo le lisebelisoa tse kentsoeng, le boleng bo ka tšeptjoang.
40 limilimithara - 110 limilimithara PE PVC PP EVA PA Plastiki single-wall Corrugated Mochini oa Peipi
Tekheniki ea paramethara ea Mochini oa Pipe oa Culvert / Mochini oa Peipi ea Sekhahla
Mohlala | SBG110 | SBG250 | SBG300 (mochini o lebelo le phahameng) |
Bophara ba phala (mm) | 50-110MM | DN/ID 50-250 | ID100-ID300mm |
Mohlala oa Extruder | SJ65/33SJ-65/30 | SJ-90/30 SJ-75/30 | SJ-90/33SJ-75/33 |
Shoa hlooho, hlobo | 50-110MM | 50-250 limilimithara | 100-300 limilimithara |
Mohlala oa mochini oa ho etsa | SBGC-110 | SBGC-250 | SBGC-300 |
Fafatsa tanka ea ho pholisa | SGL-110 | SGL-250 | SGL-300 |
Mochini o sehang lerole | SGQ110 | SGQ-250 | SGQ-300 |
Stacker | SGD-110 | SGD-250 | SGD-300 |
Boemo (m) | 20x4.5x3.5 | 28×4.5×3.8 | 35m×6.8m×4m |
Lintlha tsa mochini oa extrusion oa 40 mm - 110 mm habeli leboteng la masenke
Mochini oa liphaephe oa Curlver/Mochini oa lipeipi tse entsoeng ka makote habeli oa lebota o na le
1.Extruder
thepa | mofuta oa extruder |
PVC | conical double screw extruder |
PE, PP | e sebetsang hantle haholo sekurufung se le seng |
2.Ho shoa hlooho
Lisebelisoa: tšepe ea boleng bo holimo ea alloy, kalafo ea naetrojene
E na le hitara ea tšepe e sa hloekang
Mohaho oa hlooho ea die o entsoe ka mokhoa o utloahalang, o tsamaisa mocha o tsamaisang ka mokhoa o ts'oanang, o ka etsa bonnete ba hore extrusion e tsitsitse.
3.Motopo
Palo: lipara tse 72 bakeng sa 40-110 mm
Material: Amohela thepa e ntle ea mochini e kenya tšepe 'me u sebetsane le matla a phahameng a mokhathala, le khanyetso e ntle ea abrasion.
4.Mochini oa ho etsa
Material : Tšepe ea boleng bo holimo ea alloy
Slide Rail: E na le seporo sa silde se sebetsitsoeng ka tsela e khethehileng, 'me se sebetsa ka matla a phahameng le ho hanyetsa ho hoholo ho hotle.
5.Mokhoa oa ho pholisa:
Sisteme ea ho pholisa e sebetsang hantle haholo e ka netefatsa boleng ba ho bopa.
Sisteme ea lubrication: E na le sesebelisoa sa ho tlotsa se bohareng, ho itšebetsa ka bongata.
Sistimi ea tokiso ea letsoho : E sebelisetsoa ho lokisa ka nepo boemo bo amanang pakeng tsa ho theha le molomo oa hlobo.
6. mochine o se nang lerōle
7. Stacker bakeng sa 50-110 limilimithara habeli lebota sekoti phala
Taolo ea moea, ho phethola ka mokhoa o ikemetseng ka bolelele bo tsitsitseng
Mochini oa ho itšeha o na le sesebelisoa sa pokello ea lerōle le mitha ea bolelele ba phala.
1, MELAO EA TIISETSO:
1.1 TIISETSO NAKO:LIKHOELI 12, HO TLOHA LETSATSI LA PELE LA MECHINA E SEBELISANG LEBOLONG LA BATHO BA BATHO.
1.2 MOREKISI O TLA FANA: LITŠEBELETSO LE LIKAROLO TSE SEKETSENG,TŠEBELETSO EA MAHALA KA NAKO EOHLE EA TIISETSO EA LIHLOOHO.
1.3 TŠEBELETSO EA BOPHELO:MOREKISI O LOKELA HO FANA KA TŠEBELETSO EA BOPHELO BA NAKO EA BOPHELO BA LITHO TSE REKIsitsoeng, MOREKI A LEFA LIKAROLO TSE HLOKANG KA MOR'A MELAO EA TIISETSO EA LIKHOELI 12.
2, MAEMO A HO PHELA:
2.1 BOEMO BA HO PHELA:FOB QINGDAO KOU.
2.2 NAKO EA HO PHELA:KA NAKO A LE MATSATSI A 60 A HO SEBETSA KA MOR'A HO FUMANA TEFO E FETILENG FETA LETHATHAMO LA TSE KA HARE, Morekisi O LOKELA HO TSEBISA MOREKI HORE A ETSE HLAHLOBO.MOREKISI O TSHWANETSE HO QETELA HO PAKA LITHO LE HO LOKELA HO THUSOA KA MATSATSI A 15 A HO SEBETSA KA MOR'A MOR'A MOREKISI A AMOHILE TEFO E FELETSENG.
2.3 TSAMAISO EA HO LOADING:MOREKI O TSHWANETSE HO TSEBISA MOREKI KA NAKO E LEBANG HO LAOA KA NAKO, MOREKI A KA HLOKELA HO HLOKOMELA HO LAOLWA.
3, HLAHLOBO:
HA MOCHINTŠI O QETILE, MOREKI O LOKELA HO TSEBISA MOREKI HO ETSA TLHAHLOBO PELE HO THUSOA, MOTHEKI O HLOMELA MOSEBETSI OA MOLEMO OA LITHO TSOHLE tse rekisitsoeng.MOREKISI O FIHLELA LITEHELO TSA TLHOKOMELISO BAKENG SA TLHOKOMELISO EA MACHINE.MOREKI O TLA TLA FEDKENG YA MOREKI HO TLA ETSA MOSEBETSI OA HLAHLOBO, KAPA MOREKI A KA SEBELISA KAROLO EFE KA EFE YA BORARO HO TLA FKKKENG YA MORETSI HO TLA ETSA MOSEBETSI OA HLAHLOBO.
4, KOMISI EA HO KENYA LE LISEBETSI:
HAEBA MOREKI A HLOKA, MOREKI O TSHWANETSE HO ROMELA THIMI YA TECHNICIAN FACTORY YA MORKI HO KENYA LE HO LEKOLA MORA OHLE.
Haeba ho na le thahasello ho mechini ea rona, ka kopo ikutloe u lokolohile ho ikopanya le rona:
Lengolo-tsoibila:info@tongsanextruder.com info@wpcmachinery.com
Mohala: 0086-13953226564
TEL:0086-532-82215318
Aterese: The West End le South Side Of Yangzhou Road, Jiaozhou City, Qingdao, China