Mochini oa lipeipi tse entsoeng ka makotikoti oa Double Wall o boetse o rehiloe Mochini oa ho Etsa Liphaephe tsa Culvert, o amohela mokhoa oa ho hlahisa le ho theha, o na le likarolo tsa boleng bo tšepahalang le ts'ebetso e phahameng.Ha ho bapisoa le sebopeho se seng sa lebota la phala ea polasetiki, phala e nang le marako a mabeli e na le moralo o motle oa sebopeho sa lebota, boima ba eona bo tlase bo fihla ho theko e tlase ea tlhahiso le ho ntlafatsa tlholisano ea 'maraka.E sebelisoa haholo libakeng tse fapa-fapaneng ho e-na le phala ea konkreite le liphaephe tsa tšepe, hobane e na le likarolo tse babatsehang tse kang: ho hokahanngoa habonolo le lisebelisoa tse kentsoeng, le boleng bo ka tšeptjoang.
110 limilimithara - 250 limilimithara PE PVC PP EVA PA Plastiki e habeli lebota Corrugated Mochini oa Peipi
Tekheniki ea paramethara ea Mochini oa Pipe oa Culvert / Mochini oa Peipi ea Sekhahla
Mohlala | SBG110 | SBG250 | SBG300 (mochini o lebelo le phahameng) |
Bophara ba phala (mm) | 50-110MM | DN/ID 50-250 | ID100-ID300mm |
Mohlala oa Extruder | SJ65/33SJ-65/30 | SJ-90/30 SJ-75/30 | SJ-90/33SJ-75/33 |
Shoa hlooho, hlobo | 50-110MM | 50-250 limilimithara | 100-300 limilimithara |
Mohlala oa mochini oa ho etsa | SBGC-110 | SBGC-250 | SBGC-300 |
Fafatsa tanka ea ho pholisa | SGL-110 | SGL-250 | SGL-300 |
Mochini o sehang lerole | SGQ110 | SGQ-250 | SGQ-300 |
Stacker | SGD-110 | SGD-250 | SGD-300 |
Boemo (m) | 20x4.5x3.5 | 28×4.5×3.8 | 35m×6.8m×4m |
Lintlha tsa 110 limilimithara - 250 limilimithara habeli lebota sekontiri extrusion mochini
Mochini oa liphaephe oa Curlver/Mochini oa lipeipi tse entsoeng ka makote habeli oa lebota o na le
1.Extruder
thepa | mofuta oa extruder |
PVC | conical double screw extruder |
PE, PP | e sebetsang hantle haholo sekurufung se le seng |
2.Ho shoa hlooho
Lisebelisoa: tšepe ea boleng bo holimo ea alloy, kalafo ea naetrojene
E na le hitara ea tšepe e sa hloekang
Mohaho oa hlooho ea die o entsoe ka mokhoa o utloahalang, o tsamaisa mocha o tsamaisang ka mokhoa o ts'oanang, o ka etsa bonnete ba hore extrusion e tsitsitse.
3.Motopo
Palo: lipara tse 48 bakeng sa 110-250 mm
Material: Amohela thepa e ntle ea mochini e etsang aluminium 'me e sebetse matla a mokhathala o phahameng, le ho hanyetsa hantle ha abrasion.
4.Mochini oa ho etsa
Material : Tšepe ea boleng bo holimo ea alloy
Slide Rail: E na le seporo sa silde se sebetsitsoeng ka tsela e khethehileng, 'me se sebetsa ka matla a phahameng le ho hanyetsa ho hoholo ho hotle.
5.Mokhoa oa ho pholisa:
Sisteme ea ho pholisa e sebetsang hantle haholo e ka netefatsa boleng ba ho bopa.
Sisteme ea lubrication: E na le sesebelisoa sa ho tlotsa se bohareng, ho itšebetsa ka bongata.
Sistimi ea tokiso ea letsoho : E sebelisetsoa ho lokisa ka nepo boemo bo amanang pakeng tsa ho theha le molomo oa hlobo.
6. mochine o se nang lerōle
7. Stacker bakeng sa 110-250 limilimithara habeli lebota phala phala
Taolo ea moea, ho phethola ka mokhoa o ikemetseng ka bolelele bo tsitsitseng
Mochini oa ho itšeha o na le sesebelisoa sa pokello ea lerōle le mitha ea bolelele ba phala.
1, MELAO EA TIISETSO:
1.1 TIISETSO NAKO:LIKHOELI 12, HO TLOHA LETSATSI LA PELE LA MECHINA E SEBELISANG LEBOLONG LA BATHO BA BATHO.
1.2 MOREKISI O TLA FANA: LITŠEBELETSO LE LIKAROLO TSE SEKETSENG,TŠEBELETSO EA MAHALA KA NAKO EOHLE EA TIISETSO EA LIHLOOHO.
1.3 TŠEBELETSO EA BOPHELO:MOREKISI O LOKELA HO FANA KA TŠEBELETSO EA BOPHELO BA NAKO EA BOPHELO BA LITHO TSE REKIsitsoeng, MOREKI A LEFA LIKAROLO TSE HLOKANG KA MOR'A MELAO EA TIISETSO EA LIKHOELI 12.
2, MAEMO A HO PHELA:
2.1 BOEMO BA HO PHELA:FOB QINGDAO KOU.
2.2 NAKO EA HO FIHLELA:KA NAKO A LE MATSATSI A 60 A HO SEBETSA KA MOR'A HO FUMANA TEFO E FETILENG FETA LETHATHAMO LA TSE KA HARE, Morekisi O LOKELA HO TSEBISA MOREKI HORE A ETSE HLAHLOBO.MOREKISI O TSHWANETSE HO QETELA HO PAKA LITHO LE HO LOKELA HO THUSOA KA MATSATSI A 15 A HO SEBETSA KA MOR'A MOR'A MOREKISI A AMOHILE TEFO E FELETSENG.
2.3 TSAMAISO EA HO LOADING:MOREKI O TSHWANETSE HO TSEBISA MOREKI KA NAKO E LEBANG HO LAOA KA NAKO, MOREKI A KA HLOKELA HO HLOKOMELA HO LAOLWA.
3, HLAHLOBO:
HA MOCHINTŠI O QETILE, MOREKI O LOKELA HO TSEBISA MOREKI HO ETSA TLHAHLOBO PELE HO THUSOA, MOTHEKI O HLOMELA MOSEBETSI OA MOLEMO OA LITHO TSOHLE tse rekisitsoeng.MOREKISI O FIHLELA LITEHELO TSA TLHOKOMELISO BAKENG SA TLHOKOMELISO EA MACHINE.MOREKI O TLA TLA FEDKENG YA MOREKI HO TLA ETSA MOSEBETSI OA HLAHLOBO, KAPA MOREKI A KA SEBELISA KAROLO EFE KA EFE YA BORARO HO TLA FKKKENG YA MORETSI HO TLA ETSA MOSEBETSI OA HLAHLOBO.
4, KOMISI EA HO KENYA LE LISEBETSI:
HAEBA MOREKI A HLOKA, MOREKI O TSHWANETSE HO ROMELA THIMI YA TECHNICIAN FACTORY YA MORKI HO KENYA LE HO LEKOLA MORA OHLE.
Haeba ho na le thahasello ho mechini ea rona, ka kopo ikutloe u lokolohile ho ikopanya le rona:
Lengolo-tsoibila:info@tongsanextruder.com info@wpcmachinery.com
Mohala: 0086-13953226564
TEL:0086-532-82215318
Aterese: The West End le South Side Of Yangzhou Road, Jiaozhou City, Qingdao, China