16-63mm PVC phala extrusion line

16-63mm PVC pipe extrusion line Featured Image

Tlhaloso e Khutšoanyane:

16-63mm Double cavity PVC pipe ho etsa mochine o ka hlahisa liphaephe tse peli ka nako e le 'ngoe.Sehlahisoa Kopo ka lebelo le phahameng polasetiki extruder PVC double pipe...

Theko ea mochini:35,000-45,000 USD FOB

Delivery port:Qingdao Port, Chaena

Extruder:SJSZ65/132

Bophara ba phala:16-63 limilimithara

Matla a motlakase:37kw

Re romelle lengolo-tsoibila Khoasolla joalo ka PDF

Lintlha tsa Sehlahisoa

Tshebeletso le tshehetso

Ho botsa le ho ikopanya

Li-tag tsa Sehlahisoa

16-63mm Double cavity PVC pipe ho etsa mochine o ka hlahisa liphaephe tse peli ka nako e le 'ngoe.

Sehlahisoa Kopo ka lebelo le phahameng polasetiki extruder PVC habeli phala ho etsa mochine

SJPGZ letoto la lihlooho tse polasetiki extruder PVC habeli phala extrusion ho etsa mochine e sebediswa bakeng sa ho etsa liphaephe PVC ka bophara fapaneng le mesaletsa botenya e leng haholo-holo sebelisoa ka temo le kaho phepelo ea metsi le drainage kalafo, holim'a hlooho kapa ka tlas'a lefatše lithapo le lik'hebole.Ka lebaka la litšobotsi tse khethehileng tsa liphaephe tsa polasetiki tsa PVC li sebelisoa haholo libakeng tsa lipalangoang tsa oli e sa tsoakoang, indasteri ea lik'hemik'hale e hlokang mocheso o phahameng oa ho hanyetsa le ho hanyetsa kutu, phepelo ea metsi a chesang le a futhumetseng, tsamaiso ea drainage, le boenjiniere ba masepala bo sebetsa joaloka liphaephe tse patiloeng. motlakase o phahameng le o eketsehileng oa matla a phahameng, matsoho a tšireletso joalo-joalo.

Main Features ka polasetiki extruder PVC habeli phala ho etsa mochine

Mohala ona oa tlhahiso o na le conical parallel twin screw extruder, sethala sa vacuum sizing, terekere, mochini o sehang, stacker, jj.

1) conical parallel twin-screw extruder le terekere e amohela taolo ea maqhubu a AC le molaoli oa lebelo oa England Eurotherm DC.Pompo ea vacuum le terekere li amohela lihlahisoa tsa boleng bo holimo.

2) Literekere li ka aroloa ka pedrail ea holimo le tlaase, li-claw tse tharo, li-claw, li-claw tse tšeletseng, joalo-joalo Ho ea ka botenya le bophara ba liphaephe.Ts'ebetso ea mohala oa tlhahiso e ka tšeptjoa ebile tlhahiso e phahame.

3) Ho ea ka litlhoko tse fapaneng tsa bareki, k'hamphani e tla hlomella mohala oa extrusion ka lisebelisoa tse ikhethileng ho theha melapo ea tlhahiso ea liphaephe tsa liphaephe tse ka hare tsa lebota, liphaephe tsa lebota tse ka hare le liphaephe tse phophomang ka hare.

Mohlala	SJPSGZ-63
Extruder	SJSZ-65/132
Diameter (mm)	16-63 limilimithara
Tlhahiso ea liphaephe	Pepe ea pvc e tsoang habeli
Bokhoni(kg/h)	120-150 lik'hilograma / hora
Matla a kentsoeng(kw)	65kw
Lebelo la ho hula (m/h)	10-30m/h

Litšoantšo tsa mochini

1, SJSZ65/132 Extruder e ka sehloohong: conical double screw

2, shoela hlooho bakeng sa PVC habeli phala mochine

3, tanka ea metsi bakeng sa mochini oa pipe o habeli oa PVC-

4, hula bakeng sa mochini oa lipeipi tse peli tsa PVC-

5, seha bakeng sa mochini oa phala ea PVC habeli-

6, stakcer bakeng sa PVC mochine oa phala habeli-

E fetileng: 16-63mm Multi layer PPR ho etsa mochini o etsang liphaephe

E 'ngoe: 50-200mm drainage PVC phala extrusion line

1, MELAO EA TIISETSO:

1.1 TIISETSO NAKO:LIKHOELI 12, HO TLOHA LETSATSI LA PELE LA MECHINA E SEBELISANG LEBOLONG LA BATHO BA BATHO.

1.2 MOREKISI O TLA FANA: LITŠEBELETSO LE LIKAROLO TSE SEKETSENG,TŠEBELETSO EA MAHALA KA NAKO EOHLE EA TIISETSO EA LIHLOOHO.

1.3 TŠEBELETSO EA BOPHELO:MOREKISI O LOKELA HO FANA KA TŠEBELETSO EA BOPHELO BA NAKO EA BOPHELO BA LITHO TSE REKIsitsoeng, MOREKI A LEFA LIKAROLO TSE HLOKANG KA MOR'A MELAO EA TIISETSO EA LIKHOELI 12.

2, MAEMO A HO PHELA:

2.1 BOEMO BA HO PHELA:FOB QINGDAO KOU.

2.2 NAKO EA HO FIHLELA:KA NAKO A LE MATSATSI A 60 A HO SEBETSA KA MOR'A HO FUMANA TEFO E FETILENG FETA LETHATHAMO LA TSE KA HARE, Morekisi O LOKELA HO TSEBISA MOREKI HORE A ETSE HLAHLOBO.MOREKISI O TSHWANETSE HO QETELA HO PAKA LITHO LE HO LOKELA HO THUSOA KA MATSATSI A 15 A HO SEBETSA KA MOR'A MOR'A MOREKISI A AMOHILE TEFO E FELETSENG.

2.3 TSAMAISO EA HO LOADING:MOREKI O TSHWANETSE HO TSEBISA MOREKI KA NAKO E LEBANG HO LAOA KA NAKO, MOREKI A KA HLOKELA HO HLOKOMELA HO LAOLWA.

3, HLAHLOBO:

HA MOCHINTŠI O QETILE, MOREKI O LOKELA HO TSEBISA MOREKI HO ETSA TLHAHLOBO PELE HO THUSOA, MOTHEKI O HLOMELA MOSEBETSI OA MOLEMO OA LITHO TSOHLE tse rekisitsoeng.MOREKISI O FIHLELA LITEHELO TSA TLHOKOMELISO BAKENG SA TLHOKOMELISO EA MACHINE.MOREKI O TLA TLA FEDKENG YA MOREKI HO TLA ETSA MOSEBETSI OA HLAHLOBO, KAPA MOREKI A KA SEBELISA KAROLO EFE KA EFE YA BORARO HO TLA FKKKENG YA MORETSI HO TLA ETSA MOSEBETSI OA HLAHLOBO.

4, KOMISI EA HO KENYA LE LISEBETSI:

HAEBA MOREKI A HLOKA, MOREKI O TSHWANETSE HO ROMELA THIMI YA TECHNICIAN FACTORY YA MORKI HO KENYA LE HO LEKOLA MORA OHLE.

Haeba ho na le thahasello ho mechini ea rona, ka kopo ikutloe u lokolohile ho ikopanya le rona:

Lengolo-tsoibila:info@tongsanextruder.com info@wpcmachinery.com

Mohala: 0086-13953226564
TEL:0086-532-82215318

Aterese: The West End le South Side Of Yangzhou Road, Jiaozhou City, Qingdao, China