Sampole ea Mahala ea Fektheri ea Pe/pp/pa/pvc/eva Mohala o le Mong oa Lebota le Lesenke la Corrugated Pipe (Lebelo le phahameng)

Sampole ea Mahala ea Fektheri Pe/pp/pa/pvc/eva Mohala o le Mong oa Lebota le Lesenke la Lebota (Lebelo le phahameng) Sets'oants'o se Featured
  • Sampole ea Mahala ea Fektheri ea Pe/pp/pa/pvc/eva Mohala o le Mong oa Lebota le Lesenke la Corrugated Pipe (Lebelo le phahameng)
  • Sampole ea Mahala ea Fektheri ea Pe/pp/pa/pvc/eva Mohala o le Mong oa Lebota le Lesenke la Corrugated Pipe (Lebelo le phahameng)
  • Sampole ea Mahala ea Fektheri ea Pe/pp/pa/pvc/eva Mohala o le Mong oa Lebota le Lesenke la Corrugated Pipe (Lebelo le phahameng)
  • Sampole ea Mahala ea Fektheri ea Pe/pp/pa/pvc/eva Mohala o le Mong oa Lebota le Lesenke la Corrugated Pipe (Lebelo le phahameng)
  • Sampole ea Mahala ea Fektheri ea Pe/pp/pa/pvc/eva Mohala o le Mong oa Lebota le Lesenke la Corrugated Pipe (Lebelo le phahameng)
  • Sampole ea Mahala ea Fektheri ea Pe/pp/pa/pvc/eva Mohala o le Mong oa Lebota le Lesenke la Corrugated Pipe (Lebelo le phahameng)

Tlhaloso e Khutšoanyane:

Basebetsi ba rona ka koetliso e nang le boiphihlelo.Tsebo e nang le boiphihlelo, maikutlo a matla a k'hamphani, ho kopana le litlhoko tsa k'hamphani tsa bareki bakeng sa sampole ea mahala ea Factory Pe/pp/p...


  • FOB Theko:US $20,000-100,000/sete
  • Bongata ba Odara:1 sete
  • Matla a Phepelo:10 lihlopha ka khoeli
  • Boema-kepe:Qingdao
  • Melao ea Tefo:L/C,D/A,D/P,T/T
    • Khoasolla joalo ka PDF

    Lintlha tsa Sehlahisoa

    Tshebeletso le tshehetso

    Ho botsa le ho ikopanya

    Li-tag tsa Sehlahisoa

    Basebetsi ba rona ka koetliso e nang le boiphihlelo.Tsebo ea litsebo tse nang le tsebo, boikutlo bo matla ba k'hamphani, ho kopana le litlhoko tsa k'hamphani bakeng sa Factory Free sampole Pe/pp/pa/pvc/eva Single Wall Corrugated Pipe Extrusion Line (High Speed), Re amohela bareki ba bacha le ba pele ho tsoa mefuteng eohle ea bophelo ba letsatsi le letsatsi ho ikopanya le rona bakeng sa litšebelisano tsa mokhatlo tse tlang pele le katleho e kopaneng!
    Basebetsi ba rona ka koetliso e nang le boiphihlelo.Tsebo ea litsebo tse nang le tsebo, kutloisiso e matla ea k'hamphani, ho kopana le litlhoko tsa k'hamphani tsa bareki bakeng saPe/pp/pa/pvc/eva Corrugated Pipe Extrusion Line(Lebelo le phahameng), Pe/pp/pa/pvc/eva Mochini oa Peipi o Sentsoeng (Lebelo le phahameng), Pe/pp/pa/pvc/eva Mochini o le Mong oa Lebota le Lesenke la Peipi (Lebelo le phahameng), Ke hobane’ng ha re ka etsa lintho tsee?Hobane: A, Re tšepahala ebile rea tšepahala.Lihlahisoa tsa rona li na le boleng bo phahameng, theko e khahlehang, bokhoni bo lekaneng ba phepelo le tšebeletso e phethahetseng.B, Sebaka sa rona sa libaka se na le molemo o moholo .C, Mefuta e fapaneng: Amohela potso ea hau, E tla ananeloa haholo.

    Litlhaloso

    PE Carbon Spiral Pipe Ho Etsa Mochini oa 3 Mochini oa ho Etsa Lipeipi tsa PE Carbon Spiral 6 
    1. fumana CE
    2.high lebelo le boleng bo phahameng
    3.bophelo bo bolelele le tshebeletso

    PE Carbon Spiral Pipe Ho Etsa Mochini

    PE Carbon Spiral Pipe Ho Etsa Mochini PE Carbon Spiral Pipe Ho Etsa Mochini oa 2 Mochini oa ho Etsa Lipeipi tsa PE Carbon Spiral 5 PE Carbon Spiral Pipe Ho Etsa Mochini oa 4

    Mohala ona oa tlhahiso o sebelisoa haholo ho hlahisa liphaephe tsa PE spiral tse sebelisoang haholo e le ho sireletsa matsoho a optic kapa thapo ea motlakase, 'me li ntse li sebelisoa haholo masimong a motlakase, telecom, mesebetsi ea poso, kaho ea tsela e hlakileng, boema-kepe, joalo-joalo. li khetholloa ka matla a phahameng le ho hirisoa, ho hanyetsa khoholeho ea mobu, sebopeho se sa khaotseng le lipalangoang tse bonolo le ho bolaoa, joalo-joalo Li ka sebetsoa le ho kenngoa ka liphaephe tse telele tse nang le li-radians tse sa tšoaneng.Ka lebaka la melemo ena, li ratoa haholo ke bareki ba sebetsang mafapheng a mangata.
    Likarolo tsa mohala oa tlhahiso:
    1. Extruder e inehetseng e le 'ngoe e sebelisoa ka ho khetheha bakeng sa ho hlahisa lihlahisoa tsa polyolefin,' me sekoti se khethehileng se arohaneng sa mix-melting screw se na le likarolo tsa extrusion e phahameng ka potlako le polasetiki, joalo-joalo.
    2. Pipe die head head e entsoe ka mokhoa o tloaelehileng, 'me tsela e utloahalang e phallang e tiisa ho boreleli ka hare le ka ntle ho marako a pipe.Mokhoa oa ho kopanya hlooho ea lefu o entsoe ho latela tlhoko ea moreki, e bolokang sebaka se ngata.
    3. Ka bobeli li entsoe ka mahlale a koporo spiral sizing sheath le sesebelisoa se matla sa ho hema vacuum se kenya letsoho ho phatloheng ho hoholo ha liphaephe.
    4. Tanka e entsoe ka tšepe e sa hloekang, 'me mochine o ikemetseng o sebelisoa ho laola boemo ba mokelikeli.Mohala o ikhethang oa ho fafatsa o tlisa pholiso e sebetsang hantle 'me enjene e netefatsa motsamao oa longitudinal le tokiso ea mahlakore a mararo ho latela litaelo tsa ho ea holimo, tlase, ho le letšehali le ho le letona.
    5. Mokhoa o khethehileng oa boholo le mokhoa oa ho pholisa o nolofalletsa mohala oa tlhahiso ho hlahisa liphaephe tseo bophara ba tsona bo fapaneng ho tloha ho 25mm ho ea ho 200mm, ka lebelo la 0.8to 1.5 metres ka motsotso.

    Thekniki e ka sehloohong parameter

    ParameterMohlala

    SJ-65B

    SJ-90B
    Bolelele dia.karolelano 30:1 30:1
    Liphaephe tse hlahisoang 25-100 75-200
    Matla a tlhahiso(kg/h) 20-60 50-100
    Lebelo la tlhahiso (m/min) 0.8-1.5 0.8-1.5
    Matla a maholo (kw) 32.7 50.2
  • E fetileng:
  • E 'ngoe:

    • 1, MELAO EA TIISETSO: 

    1.1 TIISETSO NAKO:LIKHOELI 12, HO TLOHA LETSATSI LA PELE LA MECHINA E SEBELISANG LEBOLONG LA BATHO BA BATHO.

    1.2 MOREKISI O TLA FANA: LITŠEBELETSO LE LIKAROLO TSE SEKETSENG,TŠEBELETSO EA MAHALA KA NAKO EOHLE EA TIISETSO EA LIHLOOHO.

    1.3 TŠEBELETSO EA BOPHELO:MOREKISI O LOKELA HO FANA KA TŠEBELETSO EA BOPHELO BA NAKO EA BOPHELO BA LITHO TSE REKIsitsoeng, MOREKI A LEFA LIKAROLO TSE HLOKANG KA MOR'A MELAO EA TIISETSO EA LIKHOELI 12.

    2, MAEMO A HO PHELA:

    2.1 BOEMO BA HO PHELA:FOB QINGDAO KOU.

    2.2 NAKO EA HO PHELA:KA NAKO A LE MATSATSI A 60 A HO SEBETSA KA MOR'A HO FUMANA TEFO E FETILENG FETA LETHATHAMO LA TSE KA HARE, Morekisi O LOKELA HO TSEBISA MOREKI HORE A ETSE HLAHLOBO.MOREKISI O TSHWANETSE HO QETELA HO PAKA LITHO LE HO LOKELA HO THUSOA KA MATSATSI A 15 A HO SEBETSA KA MOR'A MOR'A MOREKISI A AMOHILE TEFO E FELETSENG.

    2.3 TSAMAISO EA HO LOADING:MOREKI O TSHWANETSE HO TSEBISA MOREKI KA NAKO E LEBANG HO LAOA KA NAKO, MOREKI A KA HLOKELA HO HLOKOMELA HO LAOLWA.

    3, HLAHLOBO: 

    HA MOCHINTŠI O QETILE, MOREKI O LOKELA HO TSEBISA MOREKI HO ETSA TLHAHLOBO PELE HO THUSOA, MOTHEKI O HLOMELA MOSEBETSI OA MOLEMO OA LITHO TSOHLE tse rekisitsoeng.MOREKISI O FIHLELA LITEHELO TSA TLHOKOMELISO BAKENG SA TLHOKOMELISO EA MACHINE.MOREKI O TLA TLA FEDKENG YA MOREKI HO TLA ETSA MOSEBETSI OA HLAHLOBO, KAPA MOREKI A KA SEBELISA KAROLO EFE KA EFE YA BORARO HO TLA FKKKENG YA MORETSI HO TLA ETSA MOSEBETSI OA HLAHLOBO.

    4, KOMISI EA HO KENYA LE LISEBETSI: 

    HAEBA MOREKI A HLOKA, MOREKI O TSHWANETSE HO ROMELA THIMI YA TECHNICIAN FACTORY YA MORKI HO KENYA LE HO LEKOLA MORA OHLE.

    Haeba ho na le thahasello ho mechini ea rona, ka kopo ikutloe u lokolohile ho ikopanya le rona:

    Lengolo-tsoibila:info@tongsanextruder.com      info@wpcmachinery.com

    Mohala: 0086-13953226564
    TEL:0086-532-82215318

    Aterese: The West End le South Side Of Yangzhou Road, Jiaozhou City, Qingdao, China

    LIHLAHISO TSE HLAHANG

    Moqoqo oa Marang-rang oa WhatsApp!