Moralo o Nchafalitsoeng oa China Plastic PVC PP Round Waves Corrugated Roofing Sheet/Board Production Line

Tlhaloso e Khutšoanyane:

Re lula re etsa mosebetsi oa ho ba basebetsi ba bonahalang ho etsa bonnete ba hore re ka u fa boleng bo botle ka ho fetisisa hammoho le theko e ntle ka ho fetisisa ea ho rekisa bakeng sa Nchafatso ...


  • Theko ea Mochini:200,000-280,000 USD FOB QINGDAO
  • Delivery Port:Qingdao Port, Chaena
  • Extruder e ka sehloohong:SJ120/36
  • Co-extruder:SJ80/36
  • Boitsebiso ba sehlahisoa:Lisebelisoa tsa PP PE PC
  • Bophara ba sehlahisoa:2500 limilimithara
  • Botenya ba sehlahisoa:2-8mm
  • Tšebeliso ea matla:250 KW
  • Lintlha tsa Sehlahisoa

    Tshebeletso le tshehetso

    Ho botsa le ho ikopanya

    Li-tag tsa Sehlahisoa

    Re lula re etsa mosebetsi oa ho ba basebetsi ba bonahalang ho etsa bonnete ba hore re ka u fa boleng bo botle ka ho fetisisa hammoho le theko e ntle ka ho fetisisa ea ho rekisa bakeng sa Moralo o Tsosolositsoeng oa China Plastic PVC PP Round Waves Corrugated Roofing Sheet/Board Production Line, "Quality", "botšepehi" le "tšebeletso" ke molao-motheo oa rona.Botšepehi ba rona le boitlamo ba rona bo lula ka tlhompho ho mofani oa hau.Ikopanye le Rona Kajeno Bakeng sa lintlha tse ling, ikopanye le rona hona joale.
    Re lula re etsa mosebetsi oa ho ba basebetsi ba bonahalang ho etsa bonnete ba hore re ka u fa boleng bo botle ka ho fetisisa hammoho le theko e ntle ka ho fetisisa ea ho rekisa.China PC / UV Sheet Extruder, PC / UV Sheet Extrusion Line, Re amohetse mokhoa le tsamaiso ea boleng ba tsamaiso, e thehiloeng ho "tšekamelo ea bareki, botumo ba pele, melemo e kopanetsoeng, nts'etsopele ka boiteko bo kopanetsoeng", amohela metsoalle ho buisana le ho sebelisana ho tsoa lefats'eng lohle.
    2500mm PP mochini o entsoeng ka masenke: o sebelisetsoa ho etsa lakane e sekoti ea PP e sebelisetsoang ho etsa lebokose la polasetiki ea ho paka.

    PC/PE/PP Hollow Grid Plate Extrusion Line, PP sekoti lakane ho etsa mochini, PP mafahla leboteng ho etsa mochini, PP packing lebokose la tlhahiso ea line, PP corrugated lakane extrusion line.Mochini oa pampiri ea masenke oa PP

    Mochini oa ho etsa lakane oa PP (12)

    Mochini ona oa likotopo oa PP o hlokomela tlhahiso e tsoelang pele ea PC/PE/PP ea tšepe e se nang letho, e sebetsang mokhabisong oa kaho, pokello ea lipapatso, le ho koala lerata tseleng e kholo hammoho le ho paka.PE/PP hollow grid plate ke sebaka se loketseng sa lebokose la pampiri ha ho etsoa lebokose la ho paka.E khetholloa ka boima bo bobebe, matla a phahameng, ho thibela letamo le ho thibela ho bola.Bophara ba lihlahisoa ke 1220-2100 mm, 'me botenya ke 2 mm-12 mm.

    Mochini oa lakane oa PP o se nang letho

    Litšoantšo tsa mochini bakeng sa mochini oa pampiri oa masenke oa PP

    1, Silo e kopanyang lisebelisoa bakeng sa mochini oa pampiri oa PP: e sebelisetsoa ho kopanya lisebelisoa tsa PP ka ho tlatsa masterbatch le colorbatch.

    Mochini oa ho etsa letlapa la PP (6)
    2, Extruder bakeng sa mochini oa letlapa la PP:Sekoti se entsoeng ka mokhoa o khethehileng le tsamaiso e tsoetseng pele ea ho laola e netefatsa palatalization e babatsehang, tlhahiso e phahameng le extruding e tsitsitseng.

    Haeba moreki a batla ho sebelisa lisebelisoa tsa recyle, re ka boela ra hlomella mohala oa co-extrusion bakeng sa ho etsa letlapa le sekoti la PP, lesela le ka hare le ka sebelisa lisebelisoa tsa PP tse nchafalitsoeng, 'me lesela le kaholimo le ka sebelisa lisebelisoa tse ncha tsa PP.

    Mochini oa ho etsa lakane oa PP (1) Mochini oa ho etsa lakane oa PP (11) Mochini oa ho etsa lakane oa PP (7)

    3, hlooho le hlobo bakeng sa mochini oa pampiri oa PP:re ka hlomella hlooho ea lefu le calibrator bakeng sa bophara bo fapaneng, joalo ka 1220mm, 1700mm, 2100mm,2300mm,2500mm.

    Mochini oa ho etsa lakane oa PP (9) PP sekoti lakane hlobo
    Ho fetola skrine bakeng sa mochini oa pampiri o entsoeng ka masenke oa PP: Phetoho e potlakileng ea skrine ea sisteme ea hydraulic e netefatsa hore nako e khuts'oane ea ho fetoha ha skrini.Maemo a mabeli a kopantsoeng le sebopeho se khethehileng sa tiiso se tiisa ts'ebetso e tsitsitseng ea mochini o fetolang skrini.
    Mould: Mould o sebelisa tšepe ea boleng bo holimo le sesebelisoa sa ho thothomela ho netefatsa hore esita le khatello ea phepelo e nang le tšusumetso molomong oa hlobo, le ketso e fapaneng ea sekotoana se tiisang botenya ba poleiti.

    PP e se nang letho e fetolang skrine ea grid
    Tafole e lekanyang ea vacuum bakeng sa mochini oa pampiri ea masenke oa PP:Sistimi ea phapanyetsano ea mocheso le pholileng ea lebelo le potlakileng ho lekanya sistimi e fapanyetsana hantle le ka tloaelo ka sistimi ea vacuum, e netefatsang ho nepahala ha maemo.Sistimi ea vacuum e na le li-subsystem tse peli tse ikemetseng 'me e' ngoe le e 'ngoe e na le mela e mengata e tsitsitseng e potolohang ea mofuta oa lintlha tse tharo.Ho sa le joalo, mohala o mong le o mong o na le sistimi e laolang vacuum le sistimi e bonts'a vacuum e hlokomelang boemo bo tsitsitseng ba vacuum holim'a poleiti.

    Mochini oa ho etsa lakane oa PP (4)
    Terekere ea mochini oa pampiri oa masenke oa PP: Ho na le literekere tse peli.Ea pele ke matla a phahameng, karo-karolelano e phahameng ea ho fokotsa, mofuta oa li-roller tse ngata, ts'ebetso e tlaase ka lebelo le tlaase, ho hula ka holimo 'me e khona ho hula poleiti ho tloha tafoleng ea calibrating ka ho lekana le ka mokhoa o lumellanang.Ea bobeli e etselitsoe ho tlosa khatello ea kelello, 'me ho phaella moo e na le lisebelisoa tsa ho khaola ka bohale ho netefatsa hore bophara bo nepahetseng le ho khaola ka boreleli ho metse.

    pp mochini oa pampiri o sekoti
    Ho tlosa khatello ea maikutlo bakeng sa mochini oa lakane oa PP: The e tsoetseng pele khōlō sebaka conductive futhumatsang mode ka ka katleho tlosa khatello ea kelello poleiti le ho feta ntlafatsa plainness ea poleiti.

    Mochini oa ho etsa letlapa la PP (5)
    Mochini oa ho itšeha bakeng sa mochini oa pampiri oa masenke oa PPMokhoa o nepahetseng oa ho itšeha o tsitsitseng hang-hang le sistimi ea ho lahla ea othomathike e kopantsoeng le lehare le bohale la tšepe le hlokomela boleng bo holimo ba ho itšeha.

    Mochini oa ho etsa letlapa la PP (2)

    Sehlahisoa sa ho qetela le ts'ebeliso e entsoeng ke mochini oa letlapa la PP:

    Mochini oa lakane oa PP (23) Mochini oa lakane oa PP (1)Letlapa le se nang letho la PP

    Mochini oa lakane oa PP (30) Mochini oa lakane oa PP (9)


  • E fetileng:
  • E 'ngoe:

  • 1, MELAO EA TIISETSO: 

    1.1 TIISETSO NAKO:LIKHOELI 12, HO TLOHA LETSATSI LA PELE LA MECHINA E SEBELISANG LEBOLONG LA BATHO BA BATHO.

    1.2 MOREKISI O TLA FANA: LITŠEBELETSO LE LIKAROLO TSE SEKETSENG,TŠEBELETSO EA MAHALA KA NAKO EOHLE EA TIISETSO EA LIHLOOHO.

    1.3 TŠEBELETSO EA BOPHELO:MOREKISI O LOKELA HO FANA KA TŠEBELETSO EA BOPHELO BA NAKO EA BOPHELO BA LITHO TSE REKIsitsoeng, MOREKI A LEFA LIKAROLO TSE HLOKANG KA MOR'A MELAO EA TIISETSO EA LIKHOELI 12.

    2, MAEMO A HO PHELA:

    2.1 BOEMO BA HO PHELA:FOB QINGDAO KOU.

    2.2 NAKO EA HO FIHLELA:KA NAKO A LE MATSATSI A 60 A HO SEBETSA KA MOR'A HO FUMANA TEFO E FETILENG FETA LETHATHAMO LA TSE KA HARE, Morekisi O LOKELA HO TSEBISA MOREKI HORE A ETSE HLAHLOBO.MOREKISI O TSHWANETSE HO QETELA HO PAKA LITHO LE HO LOKELA HO THUSOA KA MATSATSI A 15 A HO SEBETSA KA MOR'A MOR'A MOREKISI A AMOHILE TEFO E FELETSENG.

    2.3 TSAMAISO EA HO LOADING:MOREKI O TSHWANETSE HO TSEBISA MOREKI KA NAKO E LEBANG HO LAOA KA NAKO, MOREKI A KA HLOKELA HO HLOKOMELA HO LAOLWA.

    3, HLAHLOBO: 

    HA MOCHINTŠI O QETILE, MOREKI O LOKELA HO TSEBISA MOREKI HO ETSA TLHAHLOBO PELE HO THUSOA, MOTHEKI O HLOMELA MOSEBETSI OA MOLEMO OA LITHO TSOHLE tse rekisitsoeng.MOREKISI O FIHLELA LITEHELO TSA TLHOKOMELISO BAKENG SA TLHOKOMELISO EA MACHINE.MOREKI O TLA TLA FEDKENG YA MOREKI HO TLA ETSA MOSEBETSI OA HLAHLOBO, KAPA MOREKI A KA SEBELISA KAROLO EFE KA EFE YA BORARO HO TLA FKKKENG YA MORETSI HO TLA ETSA MOSEBETSI OA HLAHLOBO.

    4, KOMISI EA HO KENYA LE LISEBETSI: 

    HAEBA MOREKI A HLOKA, MOREKI O TSHWANETSE HO ROMELA THIMI YA TECHNICIAN FACTORY YA MORKI HO KENYA LE HO LEKOLA MORA OHLE.

    Haeba ho na le thahasello ho mechini ea rona, ka kopo ikutloe u lokolohile ho ikopanya le rona:

    Lengolo-tsoibila:info@tongsanextruder.com      info@wpcmachinery.com

    Mohala: 0086-13953226564
    TEL:0086-532-82215318

    Aterese: The West End le South Side Of Yangzhou Road, Jiaozhou City, Qingdao, China

    Moqoqo oa Marang-rang oa WhatsApp!