Ginawa ng Bethel, Conn.-based Society of Plastics Engineers, ang taunang plastics technical conference na kilala bilang Antec ay tumutugma sa NPE at tumatakbo sa Mayo 7-10, 8 am-6 pm, sa Orange County Convention Center sa Orlando, Fla. Inaasahan ng SPE upang makaakit ng 1,500 dadalo at magkaroon ng higit sa 550 negosyo at teknikal na mga presentasyon.
Ang apat na tagapagsalita sa plenaryo para sa apat na araw na kumperensya ay sina Scott Schiller ng HP Inc., Rajen Patel ng Dow Chemical Co.'s Performance Packaging unit, John Beaumont ng American Injection Molding Institute at Beaumont Technologies at professor Phil Coates ng University of Bradford sa England at ang Polymer Interdisciplinary Research Center.
Kikilalanin at ipapakita rin ng SPE ang mga boluntaryo na pinakabagong mga boluntaryo na may status na Honored Service Members: Luyi Sun ng University of Connecticut at Uday Vaidya ng Institute for Advanced Composites Manufacturing Innovation.
Pararangalan din ng SPE ang siyam na bagong fellows — Ashok M. Adur, Carol Forance Barry, Mehmet Demirors, Dan Falla, John W. Gillespie Jr., Tie Lan, Russell Speight, Uttandaraman Sundararaj at Michael Thompson — sa Antec.Mula noong unang pagsisimula noong 1984, pinangalanan ng SPE ang 334 na miyembro bilang mga fellow.
Magsisimula sa Linggo, Mayo 6, mula 2-4 pm sa room N320FGH, ang Cross-Link Your Network, isang bukas na pag-uusap na pinapamahalaan ng mga batang propesyonal sa industriya at mga mag-aaral tungkol sa pagsasamantala sa Society of Plastics Engineers upang tumulong sa pagmaniobra ng mga akademiko at propesyonal na karera.Ang Cross-Link Your Network ay dating kilala bilang Pilot Our Future.
Mayroong dalawang kaganapan sa SPE Next Gen sa Lunes, Mayo 7: Next Gen Advisory Board Meeting mula 8-11 am sa room N320E at FLiP at Sip Reception, na iniharap din ng mga Future Leaders ng Plastic Industry Association sa Plastic, mula 4:30-6 :30 pm sa Valencia Ballroom Foyer sa West Building Level 4.
Bukas sa mga mag-aaral lamang, ang pananghalian ng mag-aaral ay gaganapin sa Miyerkules, Mayo 9 mula 12:30-2 pm sa silid W414AB.
Ang mga mananalo sa apat na kategorya, kasama ang People's Choice Award at Grand Award, ng SPE Plastics for Life Global Parts Competition ay iaanunsyo sa Miyerkules, Mayo 9, kasunod ng paghatol sa Mayo 7-8 sa pasilyo sa labas ng mga silid ng programa.Ang apat na feature-based na mga kategorya ay Protektahan ang Buhay (preservation, kaligtasan, containment at proteksyon), Quality of Life (mobility, communication, luxury/comfort, recreation and entertainment), Improving Life (education, energy, opportunity and health) at Sustaining Life (kapaligiran, konserbasyon, sustainability, recycling at reduction).
Ang pinakaprestihiyosong parangal ng kompetisyon, ang Grand Award, ay napupunta sa bahaging may pinakamataas na ranggo sa mga nominasyon sa lahat ng apat na kategorya.Ang People's Choice winner ay pinili ng mga dumalo sa Antec na hindi mga empleyado ng SPE, mga miyembro ng komite ng Plastics for Life o mga hukom.
Ang panel ng mga hukom ay kinabibilangan ng mga nakaraang SPE president, SPE fellows, miyembro ng media at mga eksperto sa industriya.
Gayundin sa Antec ay ang Women's Connection Breakfast sa 7-8:30 am, Martes, Mayo 8, para sa mga plastik na propesyonal at estudyante, kung saan ibabahagi ng mga tagapagsalita ang kanilang mga karanasan sa pagtatrabaho sa industriya.Ang kaganapang ito ay pamamahalaan ni Vicki Flaris, buong propesor sa Bronx Community College at dating presidente ng Society of Plastics Engineers.
Ang mga tagapagsalita sa almusal ay si Shelley Fasano, vice president of operations para sa Dymotek Corp.;Heather Meixel, presidente ng Bamar Plastics Inc.;Wesleyne Greer, senior manager ng sales para sa Materia Inc.;at Judy Carmein, global product manager ng CNC machining para sa Proto Labs Inc.
Kinakailangan ang pagpaparehistro.Parehong lalaki at babae ay malugod na inaanyayahan na dumalo.Ang Women's Connection Breakfast ay gaganapin sa silid N310FGH.Para sa higit pang impormasyon, bisitahin ang www.eiseverywhere.com/ehome/252707/700179.
8:30-9 am: Pagbabago ng PLA para sa Pinahusay na Layer-to-Layer Adhesion sa 3D Printed Parts, Michael Thompson, McMaster University
9-9:30 am: Impluwensya ng Layer Time sa mga Resultang Bahagi ng Properties sa Fused Deposition Modeling Process, Frederick Knoop, Paderborn University-DMRC
9:30-10 am: Mga Epekto ng Polymer Rheology sa Hinulaang Die Swell at Fiber Orientation sa Large-Scale Polymer Composite Additive Manufacturing, Zhaogui Wang, Baylor University
10-10:30 am: Mga Mechanical Properties ng Reinforced Compounds para sa Large-Format Additive Manufacturing, Rabeh Elleithy, Sabic
10:30-11 am: Ang Impluwensiya ng Melt Flow Rate at Nozzle Temperature sa Fused Filament Fabrication, Nicole Hoekstra, Western Washington University
11-11:30 am: Mga Mechanical Properties ng 3D Printed Polylactide/Microfibrillated Polyamide Composites, Nahal Aliheidari, Ph.D.Mag-aaral, Washington State University
8-8:30 am: Keynote: Innovation in Mature Markets: Understanding Global Trends Across the Value Chain Key and Accelerating Development, Narayan Ramesh, Dow Chemical Co.
8:30-9 am: Melt-Mastication ng Isotactic Polypropylene para sa Pinahusay na Thermal at Physical Properties, Brian Cromer, R&D, Arkema LLC
9:30-10 am: Mga Paraan para Pahusayin ang Thermoelectric Properties ng Melt Mixed Polypropylene-Carbon Nanotube Composites, Petra Pötschke, IPF Dresden
10-10:30 am: Pagsusuri ng Bagong Binuo na Textured PTFE Gaskets na Sumailalim sa Creep Relaxation, Ali Gordon, University of Central Florida
10:30-11 am: Composition Dependent Charge Storage at Emi Shielding Performance ng Thermoplastic Elastomer Nanocomposites na Naglalaman ng MWNTs, Shital Pawar, University of Calgary
8-8:30 am: Daloy, Paghahalo at Reaksyon ng Polymer Reactive Blending sa Twin-Screw Extruder, Cailiang Zhang, Zhejiang University
8:30-9 am: Epekto ng High-Speed Twin- and Quad-Screw Compounding sa Molecular Weight, Molecular Weight Distribution, at Mechanical Properties ng Polyethylene Composites, Mansour Albareeki, Ph.D.estudyante, UMass Lowell
9-9:30 am: Experimental Validation of Fill Ratio, Resin Pressure, Resin Temperature na Nakuha Mula sa 2.5D Hele-Shaw Model in Flow of Corotating Twin-Screw Extruder, Masatoshi Ohara, Toshiba Machine Co. Ltd.
9:30-10 am: Pagdidisenyo at Computational Validation ng Extension Mixing Elements para sa Pinahusay na Dispersive Mixing sa Extrusion Operations, Vivek Pandey, Case Western Reserve University
10-10:30 am: Pagsasalarawan ng Stress sa isang Twin-Screw Extruder para sa Pagproseso at Extrusion ng Extrinsically Self-Healing Thermoplastics, Connor Armstrong, University of Maryland, College Park
10:30-11 am: Pinahusay na Nanoclay Dispersion sa Ethylene Vinyl Alcohol sa pamamagitan ng Sub-Critical Gas-Assisted Processing, Thomas Ellingham, Ph.D.estudyante, UW-Madison
11-11:30 am: Bagong Involute Extruder Screw Elements para sa Pinahusay na Produktibidad at Kalidad, Paul Andersen, Coperion
11:30-12 pm: Paglutas ng Mga Isyu sa Feed para sa Specialty Compound sa TriVolution Compounder, Gonzalo Marulanda, B&P Littleford
8:30-9 am: Pagbuo ng Molecular Diffusion Models para sa Ultrasonic Welding ng PLA, Karla Lebron, nagtapos na estudyante, Iowa State University
9-9:30 am: Mga Epekto ng Build Orientation at Fill-Level sa Mechanical Properties ng Fused Deposition Modeling PLA, Avraham Benatar, The Ohio State University
9:30-10 am: Pag-uugnay ng Ultrasonic Weld Quality With Melt Layer Thickness, Alex Savitski, Dukane IAS
10-10:30 am: Pag-unawa sa Meltdown Habang Quasi-Simultaneous Laser Transmission Welding, Philip Bates, Royal Military College of Canada
10:30-11 am: Pananaliksik sa Larangan ng Temperatura ng Laser Transmission Welding Polycarbonate Batay sa 3D Real Surface Topography, Zhong Hongqiang, Soochow University
11-11:30 am: Temperature Field at Fluid Field Simulation ng Laser Transmission Welding Polycarbonate, Yan Tingpei, Soochow University
8-8:30 am: Pagtatasa ng Polybutylene Plumbing Installations Pagkatapos ng Pangmatagalang Serbisyo, Dale Edwards, Engineering Systems Inc.
8:30-9 am: Pagganap ng PE Pipe Resin sa Chlorine Dioxide na Naglalaman ng Aqueous Solution, Márton Bredács, Polymer Competence Center Leoben
9-9:30 am: Quantifying Oxidative Degradation in Polyolefin Pipe by IR Spectroscopy, Don Duvall, ESi
9:30-10 am: Pipe Quick Burst Pressure Investigation ng Sample Length sa Dalawang Plastic, Bryan Hauger, Hauger Consulting
10-10:30 am: Makabagong Millimeter Waves Technology para sa Pagsukat ng Diameter, Ovality, Kapal ng Pader at Sagging ng Malalaking Plastic Pipe, Katja Giersch, SIKORA AG
10:30-11 am: Mga Epekto ng Primer sa Mechanical Behavior ng CPVC Pipe, Bingjun Chen, University of Alberta
11-11:30 am: Fracture Mechanic Principles para sa Multilayer Pipe-Wall Design, Florian Arbeiter, Montanuniversität Leoben
8-8:30 am: Additive Manufacturing ng Malaki, Temperature-Controlled Injection Molding Tools Gamit ang Arc Welding at Diffusion Bonding, Johannes Ullrich, Hochschule Schmalkalden
8:30-9 am: Pagkontrol sa Lokal na Mga Property ng Bahagi Gamit ang isang Segmented Temperature Control sa Injection Molding, Mauritius Schmitz, Institute of Plastics Processing (IKV) sa Industriya at ang Skilled Crafts
9-9:30 am: Characterization of Filling Performances at Mechanical Properties ng Micromolded Features, Jiang Jing, Zhengzhou University
9:30-10 am: Valve Gate Open Lag Time sa Conventional Hot Runner System, Byungohk Rhee, Ajou University
10-10:30 am: Injection Molding Setup sa pamamagitan ng Machine Learning Batay sa Simulation at Experimental Data, Julian Heinisch, Institute of Plastics Processing (IKV) sa Industriya at ang Skilled Crafts sa RWTH Aachen University
10:30-11 am: Pag-aaral sa Optical Evaluation ng Surface Adhesion sa Multilayer Injection Molding Process, Byungohk Rhee, Ajou University
11-11:30 am: Pagmomodelo ng Ultrasound-Assisted Ejection sa Micro Injection Molding, Giovanni Lucchetta, Unibersidad ng Padova
8-8:30 am: Bagong High-Strength, Low-Density Glass Bubble Products para sa Ultra-Lightweight Composites, Stephen Amos, 3M
8:30-9 am: Mga Filler na Mataas ang Pagganap: Malawak na Saklaw ng Pagpapahusay Sa Mga Maliit na Particle, Péter Sebö, Quarzwerke GmbH
9-9:30 am: Mga Bagong Insight Mula sa Pinasadyang Dispersion ng Multiwalled Carbon Nanotubes Sa Pamamagitan ng Pag-optimize ng Mga Parameter ng Melt Mixing Sa Paggawa ng Polypropylene-Based Nanocomposites, Valérie Lison, NANOCYL
9:30-10 am: Acrylonitrile Butadiene Styrene/Mica Composites: Preparation and Characterization, Mohammed Alghamdi, Yanbu Industrial College
10-10:30 am: Statistical Optimization ng Additives para sa Glass-Filled Polypropylene Stabilization, Syed Hassan, A. Schulman Inc.
10:30-11 am: Isang Bagong Carbon Black para sa High Jetness at Easy Dispersion, Marc Delvaux, Cabot Corporation
8-8:30 am: Pagbuo ng Elongational Mixing Geometries para sa Twin-Screw Compounding Extruders, Adam Dreiblatt, CPM Extrusion Group
8:30-9 am: Pagharap sa Mga Pinagsasamang Hamon ng Hinaharap Gamit ang RingExtruder RE, Erdmann Michael, Extricom Extrusion GmbH
10:30-11 am: Update sa Teknolohiya ng Coperion Pelletizing: Ano ang Bago at Bakit?, Mike Bickley at Eberhard Dietrich, Coperion
1:30-2 pm: 3D Printing Feedstock Mula sa Recycled Materials, Nicole Zander, US Army Research Laboratory
2-2:30 pm: Pagsusuri sa Pagganap ng Continuously Reinforced Acrylonitrile Butadiene Styrene na May Thermotropic Liquid Crystalline Polymer sa Fused Filament Fabrication, Mubashir Ansari, Virginia Polytechnic Institute at State University
2:30-3 pm: High-Impact Strength Polycarbonate Filament para sa Additive Manufacturing, Sarah Grieshaber, Sabic
3-3:30 pm: Lakas ng Pagbubuklod sa Additively Manufactured Multimaterial Plastics Parts, Jakob Onken, Institute of Plastics Processing sa RWTH Aachen University
3:30-4 pm: Crystallization Kinetics sa panahon ng Materials Extrusion-Based Additive Manufacturing ng Polycaprolactone, Kalman Migler, NIST
4-4:30 pm: Mga Pagsasaalang-alang sa Pagproseso: Cellulose Nanocrystal Thermoplastic Urethane Filament Production, Jacob Fallon, Virginia Polytechnic Institute at State University
4:30-5 pm: Mga Relasyon sa Istraktura at Ari-arian ng Additively Manufactured Polyphenylene Sulfide With Carbon Fiber Reinforcement, Peng Liu, Oak Ridge National Laboratory
5-5:30 pm: Pagsusuri ng Lakas ng Fused Filament Fabricated Continuous Carbon Fiber Composite Test Samples, Rogelio Herrera, University of Wisconsin-Madison
5:30-6 pm: Pagpapabuti ng Electrical Conductivity ng PC/ABS Printing Filament para sa Fused Filament Fabrication Gamit ang Carbon Nanostructures, Nicole Hoekstra, Western Washington University
6-6:30 pm: Rheological Characterization at Quality Assessment ng Commercial ABS Filament para sa Fused Deposition Modeling, Adam Miller, Shawnee State University
1:30-2 pm: Keynote: Global Automotive Color Trend, Popularity at Who's Driving, George Ianuzzi, Sandream Impact LLC
2-2:30 pm: Isang Pagsusuri ng Titanium Dioxide Photo-Activity sa Polypropylene, Philipp Niedenzu, Chemours
2:30-3 pm: Pag-unawa sa Warpage sa Injection Molded Thermoplastics: Mga Sanhi at Pinakabagong Pigmentary Solutions, Breeze Briggs, BASF Colors & Effect USA LLC
3-3:30 pm: Pagpapalawak ng mga Hangganan: Mga Pigment na Nakabatay sa Bismuth para sa Industriya ng Plastic, Cristina Zanzottera, DCC Maastricht BV
3:30-4 pm: Pag-optimize ng Kulay: Isang Pigment- at Surface-Chemistry Perspective, Christopher Beier, Clariant Plastics and Coatings USA Inc.
4-4:30 pm: VOC Reducing Additives para sa Masterbatch at Final Polymer Articles, Rob Lorenzini, Maroon Group
1:30-2 pm: Epekto ng Resin Selection sa Pore Formation ng Polyethylene Films, Wenyi Huang, Dow Chemical Co.
3-3:30 pm: Epekto ng Plastic Packaging sa Mga Epekto ng Life Cycle sa US at Canada Substitution Analysis, Emily Tipaldo, American Chemistry Council
4-4:30 pm: Pagmomodelo ng Pag-uugali ng Pelikula sa Pallet Unitization Application, Pavan Valavala, Dow Chemical Co.
4:30-5 pm: Reduced Density Nylon 6/6 Compounds para sa Extrusion Applications, Ying Shi, A. Schulman Inc.
5-5:30 pm: Ang Relasyon sa Pagitan ng Structure at Thermal and Mechanical Properties ng Thermoplastic Polyester Materials, Jeffrey Jansen, The Madison Group
5:30-6 pm: Epekto ng Annealing sa Viscoelastic Behavior ng Polyetherketone, Zhiyuan Jiang, Texas A&M University
1:30-2 pm: 3D Numerical Simulation ng Multiphase Flow sa Partially Filled Twin-Screw Extruders, Hossam Metwally, ANSYS Inc.
2-2:30 pm: Mga Mechanical Properties ng Ultrahigh Molecular Weight Polyethylene Nascent Fibers sa Iba't ibang Bilis ng Screw, Fangke Liu, estudyante, Beijing Institute of Technology
2:30-3 pm: Mga Pagpapahusay ng Viscosity at Dispersion sa Polyethylene Terephthalate Compounding, Prakash Hadimani, Steer Engineering
3-3:30 pm: Pagpapahusay ng Thermal Conductivity ng PVDF/Graphene Nanocomposites sa pamamagitan ng Water-Assisted Mixing Extrusion, Han-xiong Huang, South China University of Technology
3:30-4 pm: Mga Epekto ng Novel Extension Mixing Elements sa Fiber Length Distribution sa Composite Extrusion, Molin Guo, Case Western Reserve University
4-4:30 pm: Transition Metal Dichalcogenide Thermoplastic Composites Inihanda Gamit ang Lab Scale Extrusion, Joshua Orlicki, US Army Research Laboratory
1:30-2 pm: Micro Injection Molding ng Polypro/Graphite Composite, Shengtai Zhou, University of Western Ontario
2-2:30 pm: Foaming Uniformity Control ng High Weight Reduction Microcellular Injection Molded Thermoplastic Elastomer Gamit ang Gas Counter Pressure, Chang Che-wei, Chung Yuan Christian University
2:30-3 pm: Mechanical at Rheological na Katangian ng PP/PET Blend With Maleic Anhydrite and Jute Fibre, Abul Saifullah, Swinurne University of Technology
3-3:30 pm: Mga Mechanical Properties ng Polyamide 6/Zeolite Composites, Davoud Jahani, University of Bonab
3:30-4 pm: Mga Epekto ng Processing Parameters sa Fiber Length Distribution at Tensile Strength ng Long Glass-Fiber-Reinforced Nylon 6/6 Composites Molded Parts, Hsin-Shu Peng, Feng Chia University
4-4:30 pm: Pagsusuri sa Through-Plane Conductivity ng Molded Parts sa pamamagitan ng Magnetic Field sa Injection Molding Process, Chiu Min-Chi, Chung Yuan Christian University
4:30-5 pm: Pinahusay na Processability ng Ultrahigh Molecular Weight Polyethylene sa pamamagitan ng Supercritical Nitrogen at Carbon Dioxide sa Injection Molding, Galip Yilmaz, Wisconsin Institute for Discovery sa University of Wisconsin–Madison
5-5:30 pm: Epekto ng Stress Relaxation sa Pag-urong at Warpage ng Injection Molded Parts, Zhiliang Fan, Moldflow R&D Center, Autodesk
5:30-6 pm: Pag-aaral ng Viscoelasticity sa Warpage Validation, RuJing Jhang, CoreTech System (Moldex3D) Co., Ltd.
1:30-2 pm: Corporate Entrepreneurship: The Challenges of Creating a Startup Culture, Bonnie Bachman
3-3:30 pm: Pinagsama-sama ng Data Sciences at Domain Expertise ang Mga Puwersa sa Pagbabago ng Strategic Industrial Marketing, Bala Ambravan
3:30-4 pm: Ang Ikatlong Sustainability Survey ng industriya ng Plastics, Bonnie Bachman, Shristy Bashyal, Maggie Baumann
2-2:30 pm: Quality Monitoring ng Rotational Molded Parts Gamit ang Nondestructive Technique, Felipe Gomes, Ph.D.mag-aaral, McMaster University
2:30-3 pm: 3D Characterization at Mechanical Analysis ng Polyethylene Foams na Naproseso sa Rapid Rotational Foam Molding, Wing Yi Pao, University of Ontario Institute of Technology
3-3:30 pm: 3D Characterization ng Kalidad ng Foam-to-Skin Bonding ng Rapid Rotationally Foam Molded Integral-Skin Cellular Composites
3:30-4 pm: Surface Treatment ng Agave Fibers at Ang Pagkakatugma Nito sa PLA para Gumawa ng Rotational Molded Biocomposites, Jorge Robledo-Ortíz, Universidad de Guadalajara
4-4:30 pm: Mechanical Characterization ng Polyethylene/Carbon Nanofiber Composites Inihanda ng Rotational Molding, Milton Vazquez Lepe, Universidad de Guadalajara
4:30-5 pm: Pag-optimize ng Rotational Molding Processing ng Agave Fiber/LMDPE Composite Materials, Pedro Ortega-Gudiño, Universidad de Guadalajara
5-5:30 pm: Morphology at Mechanical Properties ng PLA Blends na Ginawa ng Rotational Molding, Eduardo Ruiz Silva, Universidad de Guadalajara
5:30-6 pm: Rotational Molding ng Hybrid Composites Batay sa Linear Low Density Polyethylene/Ground Tire Rubber/Maple Wood Fibers, Denis Rodrigue, Université Laval
1:30-2 pm: Mga Bagong Overmolding TPE sa Mga Aplikasyon na May Mga Natatanging Kinakailangan, Kushal Bahl, Teknor Apex Company
2:30-3 pm: Binibigyang-daan ng Bagong Synflow Technology ng Synventive ang mga Molder na Higit na Kakayahang Manipulahin ang Pagpuno ng mga Cavity sa Isang Naa-upgrade na Package, Greg Osborn, Synventive Molding Solutions
4-4:30 pm: Mga Pagsulong sa Fiber Laser Workstation para sa Plastic Welding Applications, Ben Campbell, Assistant Professor of Engineering, Robert Morris University
4:30-5 pm: Mga Inobasyon sa Plastic Welding Technologies: Hot Gas Welding, Anthony Verdesca, Bielomatik Inc.
5-5:30 pm: Ipinapakilala ang STRIDE, isang Collaborative Approach sa Consulting at Contract R&D, Debora Massouda, Science Technology and Research Institute of Delaware (STRIDE)
10-10:30 am: Dimensional Accuracy at Design Tips para sa Composite Parts na Ginawa ng Proseso ng FDM, Vittorio Jaker, Stratasys Inc.
8-9 am: Keynote: Pagdadala ng mga Bioproduct na Pinagkaitan ng Agrikultura sa Market: Mga Hamon at Oportunidad, William Orts
9-9:30 am: Pag-aaral ng Biodegradable Polybutylene Succinate/Polybutylene adipate-co-terephthalate Blends, Feng Wu, University of Guelph
9:30-10 am: Biodegradation ng Biodegradable at Compostable Plastics Sa ilalim ng Industrial Compost, Marine at Anaerobic Digestion, Joseph Greene, California State University, Chico
10-10:30 am: Tunable Degradation of Polybutylene succinate by Copolymerization and Catalysts, Siwen Bi, Ph.D.Mag-aaral, UMass Lowell
10:30-11 am: Mechanical Behavior at Anaerobic Biodegradation ng isang PLA Blend na Naglalaman ng PLA-co-Polyglycolic acid Copolymer, Christopher Lewis, Rochester Institute of Technology
11-11:30 am: Low-Temperature Solution Depolymerization ng PLA, John Campanelli, Zeus Industrial Products
9-9:30 am: Impluwensya ng Bonding Agents sa Fibermatrix Adhesion at Paghahambing ng VCF at RCF Fleece sa Epoxy Matrix, Jasmin Mankiewicz, Ph.D.mag-aaral, University of Applied Sciences Niederrhein
9:30-10 am: Eksperimental na Pag-aaral sa Fiber Matrix Separation Sa panahon ng Compression Molding ng Fiber-Reinforced Rib Structures, Christoph Kuhn, Volkswagen AG
10-10:30 am: Mga Epekto ng Iba't ibang Filler sa Thermomechanical Properties at Coefficient ng Linear Thermal Expansion ng Polypropylene Composites, Mohamed Abdelwahab, University of Guelph
10:30-11 am: Inline UV Light Irradiation ng Cellulose at Glass Fibers sa Pultrusion ng Thermoplastic Composites, Christian Kahl, University of Kassel
11-11:30 am: Property Characterization of Injection Molded Hybrid Composites, Gangjian Guo, Bradley University
8-8:30 am: Quantitative Characterization and Modeling of Thin Film Conformability, Alexander Chudnovsky, University of Illinois sa Chicago
8:30-9 am: Kaugnayan ng Chain Dynamics sa Mechanical Properties ng High-Performance Cross-Linked Systems, Shaw Hsu, University of Massachusetts
9-9:30 am: Paghabol sa Ibaba ng Enerhiya Landscape: Vapor Deposited Amorphous Fluorocarbons, Gregory McKenna, Texas Tech University
9:30-10 am: Napagtatanto ang Resource Saving Tire Through Innovative Tough Polymer Composite, Katsuhiko Tsunoda, Bridgestone Corp.
10-10:30 am: Pag-unawa sa Deformation Behavior ng Nanocomposites With Discrete Carbon Nanotubes, Clive Bosnyak, Molecular Rebar Design LLC
10:30-11 am: Quantitative Evaluation ng Mar Visibility Resistance ng Polymer Films, Shuang Xiao, Texas A&M University
11-11:30 am: Mechanical Characterization of Polycarbonate Reinforce With Woven Glass Fiber, Omar Solorza-Nicolas, Instituto Politecnico Nacional/Polimeros Y Compositos SA De CV
8-8:30 am: Pagpapabuti sa Fatigue Performance ng Metal-Composite Friction Spot Joints Batay sa Weld-Bonding Concept, Natalia Manente Andre, Helmholtz-Zentrum Geesthacht
8:30-9 AM: Direct-Friction Riveting ng Metal-CFRP Overlap Joints, Natascha Zocoller Borba, Helmholtz-Zentrum Geesthacht
9-9:30 am: Adhesive-Free Bonding of Pine sa pamamagitan ng Vibrational Welding, Curtis Covelli, Iowa State University
9:30-10 am: Experimental Investigation of Amplitude Transmission sa Ultrasonic Welding ng Thermoplastic Composites, Genevieve Palardy, Louisiana State University
10-10:30 am: Nakadepende sa Oras na Vibration Welding Behavior ng Foam Injection Molded Parts in Consideration of Various Fiber Reinforcements and Joint Types, Dario Heidrich, Chemnitz University of Technology
10:30-11 am: Infrared Welding ng Highly Filled Graphite Composites, Martin Facklam, Institute for Plastic Processing
11-11:30 am: Infrared Welding ng Continuous Glass-Fiber-Reinforced Thermoplastics: Mga diskarte sa Paggamit ng Fibers in the Joint, Marios Constantinou, Chemnitz University of Technology
8-11:30 am: Keynote: Mga Inobasyon sa Pagproseso ng Plastic para sa Mga Aplikasyon sa Pangangalagang Pangkalusugan, Manish Nandi, Sabic
8:30-9 am: Keynote: Mga Bagong Pag-unlad at Trend sa Medical Extrusion, Steve Maxson, Graham Engineering
9-9:30 am: Laser-Based Processing of Polymers for Medical Applications, Roger Narayan, NC State University
9:30-10 am: Micromolding Drug Delivery Devices to Micron Tolerances, Donna Bibber, Isometric Micro Molding Inc.
10-11:30 am: Panel Discussion: Part Process Development and Validation for Multiple Machines, Matthew Therrien, Rod Brown, Greg Lusardi, Paul Robinson, Brad Smith, Ed Valley, Scott Scully
8-8:30 am: Keynote: Epekto ng Water Vapor sa Thermal at Mechanical Properties ng isang Amphiphilic Block Copolymer Membrane, Daniel Hallinan, Florida A&M University at Florida State University College of Engineering
8:30-9 am: Thermal Investigation sa pagitan ng Pressure Conditioning at Thermal Annealing sa Aging Studies ng Glassy Thermoset, Brendan Ondra, University of Massachusetts–Amherst
9-9:30 am: Naobserbahan ang Paglipat ng Particle sa Pagproseso ng Polypropylene Gamit ang Glass Beads, Jose Luis Colon Quintana, UW-Madison
9:30-10 am: Tungkulin ng Functionalization ng Nanoclay Particles sa Diffusion Properties ng Commercial Gasoline Through Polymer Membranes, James Sloan, US Army Research Laboratory
10-10:30 am: Analytical Characterization ng Commercial Products: Cool Comfort Technologies para sa Bedding Products, Praveenkumar Boopalachandran, Associate Research Scientist, Dow Chemical Co.
10:30-11 am: TGA-FTIR na Pinalabas sa Huling: Ipinapakilala ang Ganap na Pinagsama, Transfer Line-Free Coupling para sa Evolved Gas Analysis ng Polymers, Bob Fidler, NETZSCH Instruments NA LLC
11-11:30 am: Polyetheretherketone (PEEK) Exposure sa ZnBr2 Completion Fluids sa Mataas na Temperatura at Pressure: Pagkilala at Quantification ng Small Molecular Decomposition Products, Joseph Baker, Texas A&M University
8-8:30 am: Keynote: Stress-Induced Crystallization sa Polypropylene, Pierre Donaldson, Flint Hills Resources
9:30-10 am: Mga Particle Additives para sa Sabay-sabay na Pagpapahusay ng Degradation at Toughening sa PLA para sa Additive Manufacturing, Caroline Multari, Lehigh University
10-10:30 am: Isang Characterization ng Soy Additives sa Bio-based Polyethylene Films, Peter Perez, UMass Lowell
2:30-3 pm: Produksyon ng'Z' Aligned Ultrasensitive, Flexible at Transparent Piezoelectric Nanocomposites, Mukerrem Cakmak, Purdue University
1:30-2 pm: Keynote: Design, Engineer, Test, 3D Print for Production – In That Order, Albert McGovern, Shure Inc.
2-2:30 pm: 3 Your Mind: To Print or Not to Print, That Is the Additive Manufacturing Question, Jim Allen, 3YOURMIND
3-3:30 pm: Epektibong Pagbawas Bago ang Additive na Paggawa: Ang Sining ng Pag-akit ng mga Limitasyon, Ravi Kunju, Altair
3:30-4 pm: Pinakamahuhusay na Kasanayan para sa Disenyo ng Plastic 3D Printed Parts, Ashley Eckhoff, Siemens PLM Software
4:30-5 pm: Tinitiyak ang Mechanical Reliability ng Additively Manufactured Parts Through Testing and Simulation, Mark Oliver, Veryst Engineering
5-5:30 pm: 3 Degrees: How To Approach Material Validation for Production Parts, Mike Vasquez, 3Degrees
2-2:30 pm: Epekto ng Salt Addition sa Dynamic Mechanical Properties para sa Polymethyl methacrylate, Masayuki Yamaguchi, Japan Advanced Institute of Science and Technology
2:30-3 pm: Synergistic Absorption ng Microwave Radiation sa PVDF Hybrid Nanocomposites na Naglalaman ng Multiwall Carbon Nanotubes at Ferrite Particle, Uttandaraman Sundararaj, University of Calgary
3:30-4 pm: Rheology bilang Tool para Maunawaan ang mga Antidrip Properties sa Flame-Retardant Polycarbonate Resin, Manojkumar Chellamuthu, Sabic
4-4:30 pm: Mga Modelong Nonlinear Viscoelastic Fluid na May Fractal Time Derivative, Donggang Yao, Georgia Institute of Technology
4:30-5 pm: Molecular Weight Distribution Prediction of Rheology Against Gel Permeation Chromatography para sa Film Grade Polypropylene, Hoda Bayazian, Paderborn University, Germany
5-5:30 pm: Epekto ng Molecular Weight sa Dynamics of Linear Isotactic Polypropylene Melt at Very High Shear Rates, Martin Zatloukal, Tomas Bata University sa Zlin
5:30-6 pm: Impluwensya ng Oscillating Surfaces sa Rheological Behavior of Thermoplastic Melt, Julius Geis, TU Ilmenau
2-2:30 pm: Melting and Residence Time sa Single-Screw Extrusion, Clemens Martin Grosskopf, University of Applied Sciences, Darmstadt, Germany
2:30-3 pm: Isang Paghahambing na Pag-aaral na Nakabatay sa Network Analysis ng Throughput Behavior sa Double Wave Screw Geometries, Hans-Juergen Luger, Institute of Polymer Extrusion and Compounding
3-3:30 pm: Paggamit ng Pressure at Temperature Profile sa Loob ng Extruder para sa Pag-optimize/Pag-troubleshoot ng Mga Proseso ng Extrusion, John WS Lee, LS Cable at System
3:30-4 pm: Pagsusuri ng Gastos para sa Pag-install ng Bago at Na-optimize na mga Screw para sa Single-Screw Extrusion Lines, Mark A. Spalding, Dow Chemical Co.
4-4:30 pm: Isang Simple System Analysis para sa Small Extrusion Screw and Die, Jingyi Xu, Graham Engineering Corp.
4:30-5 pm: Pagsusuri ng Power Consumption sa Melt Spinning: Mono and Bi-Component Fibers, Javier Vera Sorroche, UMass Lowell
5-5:30 pm: Pagsisiyasat sa Mga Epekto ng Mga Parameter ng Pagproseso sa Kalidad ng Pagtitiklop ng mga Microstructure sa Extrusion Embossing ng Polycarbonate Films, Florian Petzinka, Institute of Plastics Processing
5:30-6 pm: Epekto ng Scale Up sa Thermal Homogeneity at Energy Efficiency sa Single-Screw Extrusion, Javier Vera Sorroche, UMass Lowell
1:30-2:30 pm: Keynote: Tan Delta: Ang Walang Dimension na Ari-arian na Nagsasabi sa Iyo ng Halos Lahat ng Kailangan Mong Malaman Tungkol sa isang Polymeric Material, Michael Sepe, Michael P. Sepe LLC
2:30-3 pm: Fractography: The Science and Art of Determining How Plastics Break, Farzana Ansari, Exponent
3-3:30 pm: Failure Analysis Gamit ang FT-IR at Raman Microspectroscopy, Rui Chen, Thermo Fisher Scientific
3:30-4 pm: Paano Gumamit ng Thermoanalytical Methods para sa Failure Analysis, Tobias Pflock, NETZSCH-Gerätebau
4-4:30 pm: Pagsisiyasat ng Epekto ng Stabilizer System, Medium at Temperatura sa Fatigue Crack Growth Resistance ng Polypropylene para sa Wastong Pagpili ng Materyal, Jorg Fischer, Johannes Kepler University Linz, Institute of Polymeric Materials and Testing
4:30-5 pm: Mga Katangian ng Bali ng HDPE na Nalantad sa Chlorinated Water, Susan Mantell, University of Minnesota
5-5:30 pm: Fatigue Resistance at Failure Characterization ng Glass-Fiber-Reinforced PA Grades, Patrick R. Bradler, Johannes Kepler University Linz, Institute of Polymeric Materials and Testing
5:30-6 pm: Raman Spectroscopic Detection ng Microscopic Structural Changes sa Polyethylene Sa Panahon ng Photodegradation, Yusuke Hiejima, Kanazawa University
6-6:30 pm: Anumang Mga Isyu sa Umbok o Paneling para sa Iyong Mga Package?, Jay Yuan, Stress Engineering Services Inc.
1:30-2 pm: Keynote: Polyolefin Elastomer: Material Science at End Use Applications, Seema Karande, Dow Chemical Co.
2-2:30 pm: Rheological Methods for Characterizing the Degree of Long Chain Branching in Polyethylene, Greg Kamykowski, SPE
3-3:30 pm: Epekto ng HNTs Dispersion sa PVDF sa Morpolohiya at Ang Mekanismo ng Pagbuo Nito ng Tensile Fractured Surfaces, Han-xiong Huang, South China University of Technology
3:30-4 pm: Pagpapasiya ng Flame-Retardant Materials sa Plastics Gamit ang Kumbinasyon ng Analytical Techniques, Yanika Schneider, EAG
4-4:30 pm: Open-Cell Foaming ng PP/PTFE Fibrillated Composites, Yu Guang Chen, University of Toronto
4:30-5 pm: Core/Shell Structure ng Electrospun Polycarbonate Nanofibers, Yiyang Xu, University of Wisconsin-Madison
5-5:30 pm: Mga Epekto ng Biodegradable Additives sa Nucleation Intensity at Growth Rate ng Isotactic Polypropylene Spherulites, Yousef Mubarak, The University of Jordan
5:30-6 pm: Pag-uuri ng Hugis ng Pellet Gamit ang Deep Neural Networks, Brenda Colegrove, Dow Chemical Co.
3-4 pm: How Over the Wall Engineering Affects Process Capability and Process Robustness, Suhas Kulkarni, FimmTech Inc.
4-5 pm: Paano Malubhang Nililimitahan ng Mahina na Disenyo ang Mga Materyal, Mga Kakayahan sa Tooling at Pagproseso, Vikram Bhargava, May-akda, Tagapagsanay at Consultant
5-6 pm: Ang Epekto ng Rapid Heating Cooling Molding sa Polycarbonate-Based Material Properties, Jessica Boyer, Covestro LLC
1:30-2 pm: Pagbutihin ang Pagganap ng Iyong Retort Flexible Film, Sergi Salva Saez, UBE America Inc.
2-2:30 pm: Thermally Purified Carbons para sa Food Contact Applications: A Case Study on EU Compliance, Rijo Jacob Robin, Superior Graphite
2:30-3 pm: Biopolymer Compounds para sa mga Application na Nangangailangan ng Marine Degradation, Stanley Dudek, Polymer Processing Tech LLC
3-3:30 pm: Mga Novel Application ng Beta Nucleated Polypropylene sa Film, Thermoforming at Injection Molding Applications, Philip Jacoby, Jacoby Polymer Consulting
4-4:30 pm: Schulamid High-Performance Nylon para sa Fuel System Applications, Ying Shi, A. Schulman Inc.
5-5:30 pm: Nanolayered Next Generation High-Energy Density Capacitors para sa Electric Vehicles, Michel Ponting, PolymerPlus LLC
4-4:30 pm: Laser Welding Plastics: Rapid Prototyping to Mass Production Gamit ang Quasi-Simultaneous at 2D/3D Mask Welding, Andrew Geiger, Leister Technologies
4:30-5 pm: Mga Benepisyo ng Vibration Welding With IR Preheat, John Paul Kurpiewski, Emerson – Branson
6-6:30 pm: Ultrasonic Welding 20 kHz vs. 15 kHz: Mga Hamon na Inihahatid ng Highly Crystalline Material, Dave Krysiak, Sonics at Materials
8:30-9 am: Structure-Property Relationships ng Microporous Membranes na Ginawa ng Biaxial Orientation ng Compatibilized PP/Nylon 6 Blends, Jingxing Feng, Ph.D.mag-aaral, Case Western Reserve University
9-9:30 am: Investigation of Droplet Behavior Under Real Mixing Conditions, Oguz Celik, Institut für Kunststofftechnik-University of Stuttgart
9:30-10 am: Impluwensya ng Pagproseso at Pagbubuo sa Mga Katangian ng PP-PET-Blends, Christoph Burgstaller, TCKT
10-10:30 am: Nylon 12/PMMA/San Alloys para sa Translucent Medical Catheters, Timothy Largier, Foster Corp.
10:30-11 am: Disenyo ng Extension Flow Static Mixer para sa Blending ng Ternary Nanoparticle-Polymer-Polymer Blends, Matthew Thompson, Toray Composite Materials America Inc.
11-11:30 am: Keynote: Biopolymer Alloys and Blends: Past, Present and Future, Roger Avakian, PolyOne Corp.
8-8:30 am: Mga Inobasyon sa Automotive Plastics "Mga Materyal at Proseso," Suresh Shah, Delphi Corp. (Retired)
9-9:30 am: Low Birefringent Cellulose Acetate Propionate para sa Plastic Display Lens Covers, Laura Weaver, Eastman Chemical Co.
9:30-10 am: Panimula sa Paggamit ng Thermally Conductive Compound sa Automotive Lighting, Paula Kruger, DSM
10-10:30 am: Bagong Resin para sa Liquid Cooled Module sa Mga Electric Vehicle Battery Pack, Rudy Gorny, Covestro LLC
10:30-11 am: Pagpapabuti ng Long-Term Corrosion Resistance sa Electronic Applications, Josh McIlvaine, DuPont Co.
11-11:30 am: Mga Pag-unlad sa Hydrolysis Resistance PBT Resins para sa Electronic Applications Including Connectors and HEV Components, Dave Spritzer, DuPont Co.
8-8:30 am: Pagbuo ng Rapid Thermal Cycling Blow Molding Technology at Mold Heating System Optimization, Cheng-Long Xiao, University of South China
8:30-9 am: Simulative Preform Optimization para sa Pinahusay na Topload Behavior ng PET Bottles na Ginawa sa Two Stage Stretch Blow Molding Process, Benjamin Twardowski, IKV Aachen
9:30-10 am: Isang Simulation Framework para sa Blow Molding: Isang Preliminary Case Study sa Injection Stretch Blow Molding para sa Bulb Covers, Raghavendra Janiwarad, Sabic
10-10:30 am: Numerical Simulation of Shrinkage at Warpage Deformation ng isang Intermittent-Extrusion Blow Molded Part: Validation Case Study, Zohir Benrabah, National Research Council Canada
8-8:30 am: Foam Structure at Thermal Comfort sa Polyurethane Mattress Foams, Douglas Brune, Dow Chemical Co.
8:30-9 am: Prediction of Fiber-Reinforced Plastics Isinasaalang-alang ang Lokal na Haba ng Fiber at Oryentasyon, Fabian Willems, Institut für Kunststofftechnik
9-9:30 am: Praktikal na Simulation ng Liquid Crystal Polymer Directionality Habang Nagpoproseso, Anthony Sullivan, Tufts University
9:30-10 am: Crystallization Mechanism of Polyvinylidene Fluoride sa pamamagitan ng Nonisothermal Crystallization at Supercritical CO2 Processing, Ji Eun Lee, York University
10-10:30 am: Macromolecular Spectroscopy para sa Pagtukoy ng Mechanical Properties ng Polydimethylsiloxane (PDMS), Ahmed Anwer, University of Toronto
10:30-11 am: Mga Problema sa Daloy na Maaaring Bumangon Mula sa Pagdaragdag ng Biomass Materials sa Plastics, Carrie Hartford, Jenike at Johanson
11-11:30 am: Mga Proseso ng Rotomolding Para sa Polyaryl Ketones At Iba Pang High Temperature Polymers, Manuel Garcia-Leiner, Exponent
8-8:30 am: Karagdagang Pagpapabuti sa Pagproseso ng Semicrystalline at Amorphous Polymers para sa Thermoforming Sheet sa Multiple Nip Systems, Peter Rieg, Battenfeld-Cincinnati
8:30-9 am: Epekto ng Die Exit Stress State, Deborah Number at Extension Rheology sa Neck-In Phenomenon, Martin Zatloukal, Tomas Bata University sa Zlin
9-9:30 am: Microlayered Tubing and Pipes sa pamamagitan ng Multilayer Coextrusion, Tyler Schneider, Case Western Reserve University
9:30-10 am: Tungkulin ng Interfacial Crystallization sa Pagdidisenyo ng Polyolefin Blends Mula sa Mixed Stream Recycle Feeds, Alex Jordan, University of Minnesota
10-10:30 am: Pagsusuri ng Thermoplastic Polyurethane (TPU) Resin bilang Mga Posibleng Kapalit ng Kasalukuyang Resin para sa Escalator Handrails, Qingping Guo, EHC Canada
10:30-11 am: Paunang Pag-aaral ng Birefringence Distribution sa Blown Film, Jin Wang, Dow Chemical Co.
11-11:30 am: Energy Gap Method (EGM) Applied to Improve Extrusion Energy Performance: Successful Case Studies, Juan Carlos Ortiz Pimienta, ICIPC (Instituto de Capacitación e Investigación del Plástico y del Caucho)
9:30-10 am: Poly Vinylidene Fluoride/ Graphene Nanoplatelets Composites na May Microcellular Structure para Pahusayin ang Electromagnetic Shielding Properties, Biao Zhao, University of Toronto
10-10:30 am: Pagpapahusay ng Electromagnetic Shielding Performance ng PVDF/MWCNT Composites Through Foaming, Chenyinxia Zuo, estudyanteng Unibersidad ng Toronto
10:30-11 am: Mga Piezoelectric Foam na May Mataas na Thermal Stability at Flexibility, Zhe Liu, Florida State University
11-11:30 am: Resorcinol Formaldehyde Airgel Nanonetwork Structural Assembly at ang Thermal Properties Correlation nito, Mohammed Alshrah, University of Toronto
8:30-9 am: Bagong Teknolohiya para sa Pagpapabuti ng Halogen-Free Flame-Retardant Performance sa Polymer Application, Ido Offenbach, Evonik
9-9:30 am: New Generation Flame Retardants Batay sa Ionic Liquids, Yanjie "Jeff" Xu, Inovia Materials LLC
9:30-10 am: Novel Approach to Controlled Migration of Antifog Additives in Multilayer Packaging Films, Michal Schreiber, Tosaf
10-10:30 am: Novel Dispersants Enabled by Natural Oil Metathesis, Frederyk Ngantung, Elevance Renewable Sciences
11:30 am-12 pm: Surface Enhancement sa pamamagitan ng Polypropylene Metallic Compounds, Tanmay Pathak, A. Schulman Inc.
8:30-9 am: Keynote: Heat Transfer Modeling sa Multilayer Films na Ginamit para sa Flexible Packaging, Dan Ward, NOVA Chemicals
9-9:30 am: Thermo-Rheological Modeling at Simulation ng Heat Sealing Process para sa Multilayer Flexible Packaging Applications, Vinod Kumar Konaganti, Nova Chemicals Corp.
9:30-10 am: Mga Barrier Materials na May Layer-Like Morphology para sa Packaging Use: Extruded Film and Oriented Film, Guojun Zhang, A. Schulman Inc.
10-10:30 am: Keynote: Shifting Marketplace Dynamics and Positioning TPEs for Future Profitability, Diversification and Growth, Robert Eller, Robert Eller Associates LLC
10:30-11 am: Elastic Recovery at Actuation Sa Polyolefin Thermoplastic Elastomer, Barbara DeButts, Virginia Tech
11-11:30 am: Mula sa Mga Recycled na Gulong hanggang sa Mga Plastic na Bahagi: Micronized Recycled Rubbers sa Thermoplasitc Polyolefins, Haikun Xu, Entech Inc.
1:30-2 pm: Isang Closed Form Solution para sa Paghula sa Lakas ng Huling Bahagi ng Fused Deposition Modeling, Steven Devlin, University of Missouri
2:30-3 pm: Characterization at Mechanical Behavior ng SLS Processed PA11/CB Nanocomposites, Gabrielle Esposito, graduate student, Lehigh University
3-3:30 pm: Epekto ng Proseso ng Elliptic Smoothness at Mga Salik ng Hugis ng Powder sa Additive Manufacturing Gamit ang Laser Sintering, Marc Vetterli, Inspire AG ICAMS
3:30-4 pm: Fundamental Characterization ng CLIP 3D Printed Materials, Danielle Grolman, United Technologies Research Center
4:30-5 pm: Pagsisiyasat ng isang Novel Additive Manufacturing Technique "4D-RheoPrinting" para sa Paggawa ng Mga Pinahusay na Polymeric na Produkto, Alaauldeen Duhduh, Ph.D.mag-aaral, Lehigh University
5-5:30 pm: Critical Capillary Number sa isang Hyperbolic Converging Nozzle para sa Polymer-Based Additive Manufacturing, Aditya Sangli, University of Maryland, College Park
5:30-6 pm: Pagpili ng Materyal, Pagsubok at Pagpapatunay ng Additively Manufactured Components, Johannes Wiener, Montanuniversitaet Leoben
6:30-7 pm: Investigation of Selective Laser Sintering Parameters on the Tensile Properties of Polyamide 11, Gabrielle Esposito, graduate student, Lehigh University
2-2:30 pm: Pagbabago ng Rheological at Crystallization Properties ng High-Performance Polymers para sa Thermoplastic Composite Applications, Sarah Morgan, University of Southern Mississippi
2:30-3 pm: Pagsisiyasat sa Viscosity Characterization ng Glass Mat Thermoplastics (GMT) sa Compression Molding System, Chien Tse-Yu, Tamkang University
3-3:30 pm: Visualization ng Flow Paths sa isang Tangential Internal Mixer para I-optimize ang Mixing Behavior, Annika Lipski, Institute of Plastics Processing in Industry and the Crafts sa Aachen University of Technology
3:30-4 pm: Ang Mga Epekto ng Metal Stearates sa Rheological Properties ng Powder Injection Molding Feedstocks at Resultang Molded Green Parts, Michael Shone, UMass Lowell
4-4:30 pm: Root Cause Analysis ng Polyolefin-Based Wire at Cable Formulation Die Build-Up, Kurt Koppi, Dow Chemical Co.
4:30-5 pm: Rheological Method Development: Polymer Designs for Blow Molded, Automotive Seatbacks, Mary Ann Jones, Dow Chemical Co.
5-5:30 pm: Ang Kahalagahan ng Paano Tumpak na Isinasaad ng Mga Online na Rheometer ang Rate ng Natutunaw na Daloy sa isang Extruder, Catherine Lindquist, Dynisco
5:30-6 pm: Isang Mechanistic Model para sa Nanocavity Filling, Donggang Yao, Georgia Institute of Technology
1:30-2 pm: Thermal Conductivity Enhancement sa pamamagitan ng Stretching ng Polyethylene-Grapene Nanocomposites, Brian Grady, University of Oklahoma
2-2:30 pm: Epekto ng Mga Parameter ng Pagproseso sa Mga Katangian ng Barrier ng Nitrile-Based Nanocomposite Membrane, Mohamed Zemzem, Ph.D.mag-aaral, École de Technologie Supérieure
2:30-3 pm: Pagsasalarawan ng Scratch Behaviors ng Multilayer Automotive Coatings para sa Iba't ibang Kundisyon ng Scratch, Sung Wook Moon, Korea University
3-3:30 pm: Biomimetic Nanocoatings na May Pambihirang Mechanical, Barrier at Flame-Retardant Properties Mula sa Large Scale One-Step Coassembly, Luyi Sun, University of Connecticut
3:30-4 pm: Arkitektura ng Micro- At Nano-Layer Structure at ang Functional Properties Nito ng Polymers, Shaoyun Guo, Polymer Research Institute ng Sichuan University
4-4:30 pm: Pagsasamantala sa Capillary Forces in Filled Plastics: Electrically Conductive Plastics sa pamamagitan ng Bonding Copper Filler With Molten Solder, Derrick Amoabeng, University of Pittsburgh
4:30-5 pm: Microcapillary Film Membranes Batay sa Polyvinylidene Fluoride, Gerald Billovits, Dow Chemical Co.
5-5:30 pm: Numerical Modeling ng Complex Parison at Sheet Formation sa Blow Molding Processes Gamit ang BlowView Software, Zohir Benrabah, National Research Council Canada
5:30-6 pm: Paano Naaapektuhan ng Polymer Rheology ang Proseso ng Extrusion Blow Molding, Todd Hogan, Dow Chemical Co.
6-6:30 pm: Synergistic Reinforcing at Toughening High Density Polyethylene sa pamamagitan ng Pagpapakilala ng Dynamic Shear Force Field at Ultrahigh Molecular Weight Polyethylene, Tong Liu, South China University of Technology
6:30-7 pm: Mga Epekto ng Extruder Screw Configuration sa Thermal Properties ng Glass-Fiber-Reinforced Polyamide 6 Composites Sa buong Direct Long-Fiber-Reinforced Thermoplastics Process, Takashi Kuboki, University of Western Ontario
1:30-2 pm: Pinag-isang Simulation ng Extrudate Distortion Dahil sa Nonuniform Exit Velocity at Cooling Shrinkage, Mahesh Gupta, Plastic Flow
2-2:30 pm: Pagmomodelo ng Simple Numerical Calculation Methodology para Ipatupad ang Cross Flows sa Extrusion Die Design Batay sa Network Theory, Bianka Jacobkersting, University of Paderborn
2:30-3 pm: Pagmomodelo ng Contamination Behavior ng Polymer Melt Filters at Pressure Loss Simulation ng Filtration Media, Volker Schöppner, Paderborn University
3-3:30 pm: Eksperimental na Pag-aaral sa Melt Encapsulation: Isang Pagsusuri ng Die Pressure at Rearrangement Effects, Christian Hopmann, Institute of Plastics Processing (IKV) sa Industriya at ang Skilled Crafts sa RWTH Aachen University
3:30-4 pm: Ang Epekto ng Channel Curvature sa Flow Rate at Viscous Dissipation ng Power-Law Fluids, Wolfgang Roland, Institute of Polymer Extrusion and Compounding
4-4:30 pm: Isang Heuristic Model for Predicting Three-Dimensional Non-Newtonian Flows sa Metering Channels, Christian Marschik, Institute of Polymer Extrusion and Compounding
4:30-5 pm: Pagmomodelo sa Operating Performance ng Melt Filtration sa Polymer Recycling, Sophie Pachner, Institute of Polymer Extrusion and Compounding
1:30-2 pm: Automatic Anomaly Detection at Root Cause Analysis para sa Holistic Process Monitoring and Control in Injection Molding, Alexander Schulze Struchtrup, University of Duisburg-Essen
2-2:30 pm: Inflation Behavior of Preforms sa Special Injection Molding Process GITBlow Combining Gas-Assisted Injection Molding at Blow Molding, Björn Landgräber, Paderborn University
2:30-3 pm: Epekto ng Kondisyon ng Injection Molding sa Mould Adhesion Habang Thermoplastic Polyurethane Injection Molding, Jian-Yu Chen, Feng Chia University
3-3:30 pm: Pagpapatatag ng BMC Injection Molding sa pamamagitan ng Process Control Measures, Nicolina Topic, KraussMaffei Technologies GmbH
3:30-4 pm: Zero Defect Manufacturing sa Injection Compression Molding ng Polymer Fresnel Lenses, Dario Loaldi, Technical University of Denmark
4-4:30 pm: 3D Surface Characterization of Etched, Injection Molded Parts Before a Follow-Up Electroplating Process, Jens P. Siepmann, University of Duisburg-Essen
4:30-5 pm: Multilayer Injection Molding ng Thick-Walled Optics Gamit ang Dynamic Mold Tempering at Optimized Layer Thickness Distribution, Malte Röbig, Institute of Plastics Processing (IKV) sa Industriya at ang Skilled Crafts sa RWTH Aachen University
5-5:30 pm: Paggamit ng Magneto-Archimedes Levitation Para sa Noninvasive Characterization ng Injection Molded Parts, Peng Zhao, Zhejiang University
5:30-6 pm: Pagpapatunay ng Numerical at Practical Approach sa Pagpapatupad ng PVT Properties ng Polymer to Control to Control Shrinkage Quality of Molded, Tzu-Hsiang Wei, Ph.D.estudyante, Chung Yuan Christian University
1:30-2 pm: Keynote: Medical Tubing Process Optimization With Simulation, John Perdikoulias, Compuplast International Inc.
2-2:30 pm: Systems Engineering para sa Medical Device Development: Application sa Insulin Pumps, Marc Horner, Ansys Inc.
2:30-3 pm: Mga Epekto ng Biyolohikal na Kapaligiran sa Thermoplastic Polyurethanes, Ajay Padsalgikar, Abbott
3-3:30 pm: Accounting para sa Mga Pagkakaiba sa Modulus at Stress Relaxation Behavior sa Plastics Sumasailalim sa Chemical Resistance Testing, Mark Yeager, Covestro LLC
3:30-4 pm Mga Degradasyong Produkto ng Mga Medikal na Aparatong sa Kumplikadong Biyolohikal na Kapaligiran: Mga Istratehiya sa Pagtatasa ng Panganib, Adam Kozak, Cambridge Polymer Group
4-4:30 pm: Pinabilis na Pagtanda ng Medikal na Grade Resin: Q10 Factors and Material Aging Models, Rob Klein, Stress Engineering Services
4:30-5 pm: Engineered Polymer Surfaces para sa Superior Performance sa Pharmaceutical Applications, Prakash Iyer, Inhance Technologies
5-5:30 pm: Supercritical Carbon Dioxide Assisted Extrusion ng Graphene Nanofiller Reinforced Polymers para sa Biomedical Applications, Austin Coffey, Waterford Institute of Technology
5:30-6 pm: Ang Regulasyon ng Micro-Super-Hydrophobic Silicone Rubber sa Gawi ng Human Lens Epithelial Cells, Liuxueying Zhong, State Key Laboratory of Ophthalmology, Zhongshan Ophthalmic Center, Sun Yat-sen University, Guangzhou
2-2:30 pm: Pinabilis na Weathering Insights sa Asa Polymer UV Resistance: Xenon vs. Quv vs. Florida At Arizona, Steven Blazey, A. Schulman Inc.
2:30-3 pm: Ang Kahalagahan ng Paano Tumpak na Tinutukoy ng Mga Online Rheometer ang Rate ng Pagtunaw ng Pag-agos sa isang Extruder, Catherine Lindquist, Dynisco
3-3:30 pm: Characterization of Cure of Polymeric Material by Dielectric Analysis (DEA), Yanxi Zhang, Netzsch Instruments North America LLC
4-4:30 pm: Paggamit ng Advanced Edge Analytics para sa Pinahusay na Fault Detection sa Discrete Manufacturing Processes, Andrew Wilson, MKS Instruments Inc.
5-5:30 pm: 3D Line Confocal Imaging: Bagong High-Resolution Sensor Technology para sa Mapanghamong Online at Offline na Mga Application sa Pagsukat ng Plastic, Juha Saily, FocalSpec Inc.
1:30-2 pm: Tungo sa isang Magaang Ontolohiya: Carbon sa Gusali, Mark Goulthorpe, Massachusetts Institute of Technology
2-2:30 pm: Pagkamit ng International Building Code Recognition ng Polymeric Building Materials: Fire Performance Requirements, Nicholas Dempsey, Worcester Polytechnic Institute
2:30-3 pm: Pagdidisenyo para sa Kaligtasan sa Sunog: Mga Pagsasaalang-alang para sa Pagbuo ng Produkto, Christine Lukas, Dow Chemical Co.
3-3:30 pm: Tungo sa Matalinong Disenyo ng Mga Produktong Polymeric na Ligtas sa Sunog, Stanislav Stoliarov, Unibersidad ng Maryland
3:30-4 pm: Reinforced Polymer Composites para sa Civil Infrastructure, Hota Gangarao, West Virginia University
4-4:30 pm: Panel Discussion: Safety and Sustainability in Construction: Mga Hamon at Oportunidad para sa Plastics
4:30-5:30 pm: Keynote: Design Knock-Down Factors on Polymer Composites Under Harsh Environments, Hota Gangarao, University of West Virginia
6-6:30 pm: Corrosion Inhibition Model para sa Aluminum sa pamamagitan ng Sodium Carboxymethyl Cellulose (Polymer) Sa Acidic Solution, Macdenis Egbuhuzor, University of Nigeria Nsukka
8-8:30 am: One-Step Electrochemical Treatment ng Metal Inserts para sa Tight Polymer-Metal Hybrid Applications, Tobias Kleffel, Institute of Polymer Technology
8:30-9 am: Mga Epekto ng Pagproseso ng mga Variable sa Crystallization Phase ng PVDF-TRFE-CFE Thin Films, Hao Pan, UMass-Lowell
9-9:30 am: Bagong Transparent High-Heat Polycarbonate Copolymer Resins para sa Thermo-Optical Applications, Mark Van Der Mee, Sabic
10-10:30 am: Highly Filled Biochar/Ultrahigh Molecular Weight Polyethylene/Linear Low Density Polyethylene Composites para sa Electromagnetic Interference Shielding, Suiyi Li, University of Wisconsin--Madison
10:30-11 am: Thermoelectric Properties ng Open Cellular Polymer Templates na Pinahiran ng 1D at 2D Carbon-Based Nanoparticles, Siu Ning (Sunny) Leung, York University
7:30-8 am: Damage Induced Surface Texturing ng Short Fiber PDMS Composite Materials, Reza Rizvi, University of Toledo
8-8:30 am: Ang Impluwensiya ng Hygrothermal Aging sa Material Properties ng Endless Fiber-Reinforced Thermoplastics, Matthias Huettner, Paderborn University
8:30-9 am: Impluwensiya ng Fiber-Matrix-Interaction sa Fracture Behavior ng Regenerated Cellulose Fiber-Reinforced Polypropylene, Jan-Christoph Zarges, University of Kassel
9-9:30 am: Epekto ng Freeze-Drying sa Morphology ng Dried Cellulose Nanocrystals (CNCs) at Tensile Properties ng Poly(lactic) Acid-CNC Composites, Nicole Stark, USDA Forest Service, Forest Products Lab
9:30-10 am: Mga Epekto ng Trisnonylphenyl Phostite sa Mechanical Property ng Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate), Takashi Kuboki, University of Western Ontario
10-10:30 am: Potensyal ng Biocarbon bilang Reinforcement para sa PBT sa Automotive Applications, Boon Peng Chang, University of Guelph
10:30-11 am: Crystallization Behavior ng PLA Composite Nanofibers sa pamamagitan ng Annealing, Jian-hua Hou, Zhengzhou University
8:30-9 am: Mas Mas Matibay: Ang Kaso para sa Carbon-Fiber-Filled Thermoplastics, Philip Schell, Zoltek
9-9:30 am: Isang Novel High-Performance Chopped Strand Glass Fiber para sa Reinforcing Polypropylene-ThermoFlow 641, Derek Bristol, Johns Manville
10-10:30 am: Fundamentals and Emerging Technologies of Fiber Sizing and Interfacial Adhesion, Steve Bassetti, Michelman Inc.
11-11:30 am: Abot-kayang Recycled Carbon Fiber para sa Additive Manufacturing (3D Printing) at Automotive Thermoplastics, Andrew Maxey, Vartega Inc.
8-8:30 am: Digital Printing Technologies para sa Plastics: Tumutok sa Color Inkjet at Laser Marking, Scott Sabreen, The Sabreen Group
9:30-10 am: Mga Application para sa Low-Energy eBeam Curing Technology sa Consumer Product Flexible Packaging Applications, Anthony Carignano, eBeam Technologies
10-10:30 am: Carbon Black Selection para sa Matagumpay sa Pamamagitan ng Transmission Laser Welding and Joining, Scott Sabreen, The Sabreen Group;Avraham Benatar, Ohio State University
8-8:30 am: Keynote: All Encompassing Extrusion Technology for Producing a Wide Spectrum of Simultaneously Bioriented Films, Adolfo Edgar, Kuhne Anlagenbau GmbH
9-9:30 am: Bagong Surface Treatment Protocol Discovery para sa Extrusion Coating, Rory Wolf, ITW Pillar Technologies
10-10:30 am: Mga Pelikulang Biaxially Oriented Polyethylene (BOPE) na Ginawa sa pamamagitan ng Proseso ng Tenter Frame at Mga Aplikasyon Nito, Yijian Lin, Dow Chemical Co.
10:30-11 am: Biaxially Oriented Barrier Film (BOPP) With Nanostructured Additives, Krishnamurthy Jayaraman, Michigan State University
11-11:30 am: Paraan para Sukatin ang Oxygen Permeance sa Sealed Flexible Packaging, Alejandro Serna, ICIPC
8-8:30 am: Deformation at Stress Prediction ng Injection Molded Components Pagkatapos I-mount sa Designed Position, Zhiliang Fan, Moldflow R&D Center, Autodesk
8:30-9 am: Moldflow Optimization ng Microcavities Filling Sa panahon ng Injection Molding Process, John Coulter, Lehigh University
9-9:30 am: Deep Learning on CAE Batay sa Integrasyon ng Taguchi Method at Neural Network, Yu-Wei Chen, Chung Yuan Christian University
9:30-10 am: Paano Gamitin ang CAE para I-diagnose ang Problema sa Under-Performance ng Umiiral na Machine sa Injection Molding para Harapin ang Automation Challenge, Chao-Tsai Huang, Tamkang University
10-10:30 am: Paggamit ng Bagong Anisotropic Rotational Diffusion Model para Pahusayin ang Prediction ng Short Fibers sa Thermoplastic Injection Molding, Alexander Bakharev, Autodesk
10:30-11 am: Empirical Modeling at Simulation ng Microstructure Replication sa Injection Molding, Torben Fischer, Institute of Plastics Processing (IKV) sa RWTH Aachen University
11-11:30 am: Simulation Study ng Injection Compression Molding Process para sa 0.6mm Thin Polymeric Microfluidic Chip, Ge Chen, Singapore Institute of Manufacturing Technology
8:30-9 am: Plenary: Research Credits para sa Plastics Industry, Michael Devereux, Mueller Prost CPAs + Business Advisors
9-9:30 am: Epekto ng Iba't ibang Mould Coatings sa Flow Resistance sa Thin-Wall Injection Molding ng Polystyrene Parts, Marco Sorgato, University of Padova
11-11:30 am: Baguhin ang Molds para sa Efficient Customer Development / Prototype, Tom Worcester, Meusburger USA
8-8:30 am: Epekto ng Foam Density sa Elastomeric Nanocomposite Foams Batay sa Polyisoprene Rubber, Ali Vahidifar, University of Bonab
8:30-9 am: Epekto ng Soft Segments at Nucleation Agents sa Mga Properties ng Thermoplastic Polyurethane Foam, Shu-Kai Yeh, National Taiwan University of Science and Technology
9-9:30 am: Theoretical at Experimental Investigation ng Bubble Growth sa High-Pressure Foam Injection Molding, Chongda Wang, University of Toronto
9:30-10 am: Strain Hardening of Linear Polymer Enhanced by Heat-Shrinking Fibers, Sundong Kim, University of Vermont
10-10:30 am: Pagpapahusay ng Electromagnetic Shielding Performance ng PVDF/MWCNT Composites Through Foaming, Chenyinxia Zuo, University of Toronto
10:30-11 am: Mga Piezoelectric Foam na May Mataas na Thermal Stability at Flexibility, Zhe Liu, Florida State University
11-11:30 am: Resorcinol Formaldehyde Airgel Nanonetwork Structural Assembly at ang Thermal Properties Correlation nito, Mohammed Alshrah, University of Toronto
9-9:30 am: Wearable Insulin Pumps: Design and Everyday Use Performance Prediction, Hossam Metwally, Ansys Inc.
9:30-10 am: Isang Novel Design ng Functionalized Organo-Modified Siloxanes para sa Surface Treatment ng mga Particle at Fillers, Ido Offenbach, Evonik
10-10:30 am: Automotive Lightweighting With Reduced Density Polyamide Blends, Ying Shi, A. Schulman Inc.
10:30-11 am: Xenoytm ENH2900 para sa High Chemical Resistance at Non-Br/Cl FR Applications, Emily He, Sabic
11:30 am-12 pm: Makatotohanang Simulation Solutions Gamit ang FEA para sa Disenyo, Optimization at Fabrication ng Plastics, Arindam Chakraborty, Virtual Integrated Analytics Solutions
1:30-2 pm: Pag-uugnay ng Rheology ng Polyolefin Elastomer sa Dispersion sa isang Polypropylene Matrix sa pamamagitan ng Pagmomodelo at Mga Eksperimento sa Simple Flow Fields, Jeff Munro, Dow Chemical Co.
2:30-3 pm: Dynamic Water Penetration Prediction para sa Pushback na Proseso sa Water-Assisted Injection Molding, Jim Hsu, CoreTech System
3-3:30 pm: Paano Nakakatulong ang Mga Plastic na Magtagumpay sa Mga Bagong Hamon ng Elektripikasyon ng Sasakyan, Werner Posch, Draexlmaier Group
3:30-4 pm: Pagbuo ng Low-Emission Polyolefin Composites para sa Automotive Interiors, Tanmay Pathak, A. Schulman Inc.
4-4:30 pm: Epekto ng Grain Pattern at Talc Content sa Scratch at Mar Behaviors ng Textured Thermoplastic Olefins, Shuoran Du, Texas A&M University
4:30-5 pm: Pagpapagaan ng Sasakyan at Pinahusay na Crashworthiness: Mga Plastic at Hybrid Solutions, Fred Chang, Sabic
5-5:30 pm: Isang Novel Glass-Filler-Reinforced Compound para sa Automotive Interior Parts, Cheolhee Park, GS Caltex
5:30-6 pm: Bumper hanggang Bumper: Pag-aalis ng mga Contaminant Mula sa Molded Plastic Parts Wwith Dry Ice, Steve Wilson, Cold Jet LLC
1:30-2 pm: Synthesis, Characterization at Water Application ng Microcellular Injection Molded PPGMA/MMT Nanocomposites, Shyh-Shin Hwang, Chien Hsin University of Science and Technology
2-2:30 pm: Paghahanda ng Polypropylene Single-Polymer Composites na May Graphene Nanoplatelets sa pamamagitan ng Film-Stacking, Mingwang Shao, Beijing Institute of Technology
2:30-3 pm: Isolating ang Epekto ng Polymer-Filler Interaction sa Polymer Composite Property Enhancement: Ang Halimbawa ng Polypropylene/Halloysite Hybrids, Tong Wei, Northwestern University
3-3:30 pm: Numerical at Experimental Studies sa Daloy at Warpage Habang Proseso ng Resin Transfer Molding, Sejin Han, Autodesk
3:30-4 pm: High Fracture Resistance, Filler Adhesion at Dispersion sa Epoxy Carbon Nanofiber Composites, Muhammad Anwer, University of Toronto
4-4:30 pm: Pagbuo ng Ultrasonic Processing ng CNT Nanopaper/Solventless Epoxy Prepreg, Dan Zhang, The Ohio State University
4:30-5 pm: In Situ Vitamin C Reduction ng Graphene Oxide para sa Paghahanda ng Flexible TPU Nanocomposites na May High Dielectric Permittivity, Han-xiong Huang, South China University of Technology
2-2:30 pm: Induction Heat Cool With Sabic Resin: Isang Panimula sa High-Definition Plastics, Jos van Gisbergen, Sabic
4-4:30 pm: "Mga Smart Factories": Ang Kinabukasan ng Produksyon ng Plastic na May 4.0 Connectivity at Condition Monitoring System (CMS), Markus Klaus, Wittmann Battenfeld
4:30-5 pm: Pagpapabuti ng Katumpakan ng Mga Simulation ng Pagpuno ng Mold Gamit ang Pang-eksperimentong Data Mula sa Mabilis na Pag-scan ng Chip Calorimetry, Anne Gohn, Penn State University
5-5:30 pm: Injection Molding Parts With Integrated All-Inkjet Printed Strain Gauge para sa Pagsubaybay sa Kondisyon, Thomas Mitterlehner, Ph.D.estudyante, Johannes Kepler University Linz
1:30-2 pm: Bagong Teknolohiya sa Nonhalogen Flame Retardants: Oxyimides, Rudolf Pfaendner, Fraunhofer Institute
2-2:30 pm: Mga Pagdulog sa Komersyalisasyon ng NHFR Technologies: A European Perspective, Maryline Desseix, PolyOne Corp.
3-3:30 pm: Tungo sa Carbon to Building Concept: The Material and Assembly Challenges, Mark Goulthorpe, Massachusetts Institute of Technology
3:30-4 pm: Pagkamit ng International Building Code Recognition ng Polymeric Building Materials: Mga Hamon para sa Material and Assemble Designers, Nicholas Dempsey, Worcester Polytechnic Institute
4-4:30 pm: Flame Retardants sa Consumer Products: Pangkalahatang-ideya at Pananaw sa Iminungkahing CPSC Ban, Jared Schwartz, Exponent;Andrew Worthen, Exponent
4:30-5 pm: Pag-unlad at Komersyalisasyon ng NHFR Technologies, Nicholas Dempsey, Worcester Polytechnic Institute;Maryline Desseix, PolyOne;Mark Goulthorpe, Massachusetts Institute of Technology;Gordon Nelson, Florida Institute of Technology;Rudolf Pfaendner, Fraunhofer Institute;Jared Schwartz , Exponent;Andrew Worthen, Exponent
1:30-2 pm: Pagmomodelo ng Doming Deflection of Caps and Closures With Finite Element Method, Wenbo Xu, Dow Chemical Co.
2-2:30 pm: Quasi-Static, Nonlinear, Explicit Finite Element Analysis ng Maliit na PET Bottle, Naser Imran Hossain, Niagara Bottling
2:30-3 pm: Disenyo para sa Paggawa: 3D-CAD Design Methodology para sa Spiral Milled Polymer Processing Tools, Phil Hungenberg, Universität Duisburg-Essen
3-3:30 pm: Pagpaplano ng Produktong Nakabatay sa Kaalaman at Pagdidisenyo ng Injection Molded Parts, Rene Andrae, University of Duisburg-Essen
3:30-4 pm: Impluwensya ng Thermal Treatment sa Mechanical Properties ng Thermoplastic Composites na Nakuha ng Large-Format 3D Printing Process, Miguel A. Hidalgo Salazar, Universidad Autónoma de Occidente
4-4:30 pm: Oo, Maaari Mong Labagin ang Ilang Tuntunin sa Disenyo at Magkaroon Pa rin ng Matagumpay na Produkto: Isang Lohikal na Pagtingin sa mga Implikasyon, Vikram Bhargava, May-akda, Tagapagsanay at Consultant
4:30-5 pm: Polypropylene/ Polyvinylidene Fluoride Fibrous Water/Fuel Filter na Ginawa ng Isang Natatanging Multilayer Co-Extrusion na Proseso, Cong Zhang, Case Western Reserve University
5-5:30 pm: Teknikal na Pagsusuri ng Loctite HY4060GY: Ang Mainam na Kapalit para sa Tradisyunal na 2K 5-Minute Epoxies, Matthew Miner, Henkel
5:30-6 pm: Paggamit ng mga Gastos para Makipag-ugnayan sa mga Millennial sa Lugar ng Trabaho, Laurel Bougie, aPriori Technologies
1:30-2 pm: Impluwensiya ng Compounding Process Parameters sa Dispersion at Material Properties ng Graphene-Based PP Composites Gamit ang Twin-Screw Extruder Sa ilalim ng Mga Kondisyong May Kaugnayan sa Industriya, Maximilian Adamy, IKV Aachen
2:30-3 pm: Isang Application ng Thermoplastic Polyurethane Foaming sa Handrail Extrusion, Qingping Guo, EHC Canada
3-3:30 pm: Flexural Testing ng PET-NanoFiber at PP Foamed Composites, Lun Howe Mark, University of Toronto
3:30-4 pm: Protektadong Paglago ng Biofilm sa Macroporous Polyvinilidene Fluoride Carrier para sa Biological Organic Removal Mula sa Munisipal na Wastewater, Pardis Ghahramani, Ph.D.mag-aaral, York University
4-4:30 pm: Pamamahala ng Epekto at Proteksyon para sa Paglalaro ng mga Ibabaw Gamit ang Pinalawak na Polyolefin Particle Foam: Mga Bagong Materyal at Disenyo, Steven Sopher, JSP International
4:30-5 pm: Ultalow Density Foams ng Nanocrystalline Cellulose Reinforced With Polyvinyle Alcohol, Nahal Aliheidari, Washington State University
5-5:30 pm: Isang System para sa Visualizing at Pagsukat ng Stress ng Plastic Flows sa ilalim ng Shear Conditions, Taylor Ducharme, University of Vermont
5:30-6 pm: Pagmimina ng Halaga Mula sa Oil Sands Tailings Ponds, Pavani Cherukupally, University of Toronto
6-6:30 pm: Highly Viscous Polyamides Made of Cast Polyamide 6 Recyclates, Benjamino Rocco Formisano, Institut für Kunststofftechnik-University of Stuttgart
2:30-3 pm: Nylon 6/6 Rich Co- and Terpolymers: Paano Pinapahusay ng Pag-tune ng Thermal na Gawi ang Functionality at Pinapagana ang Mga Bagong Applicaiton Space, Jacob Ray, Ascend Performance Materials
3-3:30 pm: Isang Bagong Marka ng High Melt Strength Polystyrene para sa XPS Foam Market, Ted Harris, Total Petrochemicals at Refining USA Inc.
4:30-5 pm: Low Emission Compounds: Automotive Specifications and Applications, Tanmay Pathak, A. Schulman Inc.
5-5:30 pm: Pagpapahusay ng Protective Packaging Films Gamit ang Cyclic Olefin Copolymers, Paul Tatarka, Topas Advanced Polymers Inc.
1:30-2 pm: Impluwensya ng Gas-Counter Pressure sa Pag-uugali ng Foaming at ang Cell Morphology ng Flexible Polyurethane Foam, Daniel Schneider, Institute of Plastic Processing sa RWTH Aachen University
2:30-3 pm: Bagong Henerasyon na HDPE para sa mga Pressurized na Aplikasyon: Higit pa sa Pe100, Jonathan Rabiei Tabriz, Sabic Petrochemicals
3-3:30 pm: SABIC Solutions para sa Personal Hygiene Applications: Industry Trends and SABIC Offerings and Developments, Jelena Bozovic-Vukic, Sabic
5-5:30 pm: Stylight: Bagong Material Solution para sa Magaang Disenyo, Brian Haggart, Ineos Styrolution
May opinyon ka ba tungkol sa kwentong ito?Mayroon ka bang ilang mga saloobin na nais mong ibahagi sa aming mga mambabasa?Ang Plastics News ay gustong makarinig mula sa iyo.I-email ang iyong sulat sa Editor sa [email protected]
Sinasaklaw ng Plastics News ang negosyo ng pandaigdigang industriya ng plastik.Nag-uulat kami ng mga balita, nangangalap ng data at naghahatid ng napapanahong impormasyon na nagbibigay sa aming mga mambabasa ng competitive na kalamangan.
Oras ng post: Okt-27-2020