20-110mm Multi-layer PPR pipe extrusion line, PPR pipe line line,PPRmochini o etsang liphaephe,PPRmochini oa ho etsa lipeipi,PPRthepa ea lipeipi,PPRpipe extruder,PPRmochine oa extrusion oa pipe
Sebopeho sa ronaPPRphala extrusion line:
1, Mochini o ka sehloohong o nka likurufu tse sebelisoang ka ho khetheha bakeng sa polyolefin.E na le tjhaja ea vacuum ea koloi le mochini o omisang mocheso o sa fetoheng, e na le likarolo tsa tlhahiso e phahameng, polasetiki e ntle le extruding e tsitsitseng.
2, Lihlooho tsa Die tsa mofuta oa helical le mofuta oa baskete li nepahetse bakeng sa polyolefin, 'me li ka thusa ho hlahisa khatello e qhibilihang ea molumo, le ho ntlafatsa bokhoni ba polasetiki.Ho sa le joalo, phallo e tsitsitseng ea thepa le boemo ba khatello e ka tiisetsoa.
3, Mokhoa o tsoetseng pele oa ho lekanya vacuum o ntlafatsa bohloeki le ho thatafala ha bokaholimo.Tanka e utloahalang ea ho fafatsa metsi a pholileng ka lebelo le phahameng e tiisa boleng ba liphaephe le extruding e tsitsitseng ka lebelo le phahameng.
4, Seboko sa mochini o hulang se nka lisebelisoa tsa anti abrassion alloy, tse hlokomelang ts'ebetso e tsitsitseng, mefuta e mengata ea phetoho ea maqhubu le nako e telele ea bophelo.
5, Lehare le sehang le se nang lerole la moloko o mocha le hlokomela sekheo se boreleli, lerata le holimo le lerata le tlase.
Mehlala eaPPRphala extrusion line:
Mohlala | SJ65/33 | SJ75/33 | SJ90/33 | SJ120/33 |
Bophara ba phala | 16-63 limilimithara | 75-250 limilimithara | 110-450 limilimithara | 315-630 limilimithara |
Mohala oa ho tšoaea | SJ30 | SJ30 | SJ30 | SJ30 |
Bokhoni ba tlhahiso | 100kg/h | 150-200kg/h | 300-450kg/h | 500-700kg/h |
Likarolo tsa mochini oa ronaPPRphala extrusion line
1, Extruder e ka sehloohong: screw extruder e le 'ngoe bakeng sa PPRphala extrusion line
2, co-extruder ea PPR pipe extrusion line: SJ45 extruder for multi layer co-extrusion
3, hlooho ea lefu bakeng sa mohala oa extrusion oa pipe ea PPR: boholo bo fapaneng bo ka sebelisa hlooho e fapaneng ea lefu
4, tanka e pholileng ea vacuum bakeng sa mohala oa extrusion oa pipe eaPPR: bolelele ba limithara tse 6
5, ho fafatsa tanka ea metsi bakeng sa mohala oa extrusion oa PPR: bolelele ba limithara tse 6, bakeng sa bophara bo boholo, re ka hloka ho hlomella li-sete tse 2 kapa tse 3 tsa tanka ea metsi a fafatsang.
6, hula mochini bakeng sa mohala oa extrusion oa PPR: bakeng sa bophara bo fapaneng, re ka hlomella mefuta e fapaneng ea mochini oa ho hula, joalo ka mofuta oa popane, mefuta e meraro ea popane, mefuta e mene ea popane.
7, mochine oa ho itšeha bakeng sa mohala oa extrusion oa pipe ea PPR: mochine o phahameng oa ho itšeha bakeng sa ho itšeha ho se nang lerōle
8. sehlahisoa sa stacker bakeng sa mohala oa extrusion oa pipe ea PPR: bolelele ba limithara tse 6
1, MELAO EA TIISETSO:
1.1 TIISETSO NAKO:LIKHOELI 12, HO TLOHA LETSATSI LA PELE LA MECHINA E SEBELISANG LEBOLONG LA BATHO BA BATHO.
1.2 MOREKISI O TLA FANA: LITŠEBELETSO LE LIKAROLO TSE SEKETSENG,TŠEBELETSO EA MAHALA KA NAKO EOHLE EA TIISETSO EA LIHLOOHO.
1.3 TŠEBELETSO EA BOPHELO:MOREKISI O LOKELA HO FANA KA TŠEBELETSO EA BOPHELO BA NAKO EA BOPHELO BA LITHO TSE REKIsitsoeng, MOREKI A LEFA LIKAROLO TSE HLOKANG KA MOR'A MELAO EA TIISETSO EA LIKHOELI 12.
2, MAEMO A HO PHELA:
2.1 BOEMO BA HO PHELA:FOB QINGDAO KOU.
2.2 NAKO EA HO FIHLELA:KA NAKO A LE MATSATSI A 60 A HO SEBETSA KA MOR'A HO FUMANA TEFO E FETILENG FETA LETHATHAMO LA TSE KA HARE, Morekisi O LOKELA HO TSEBISA MOREKI HORE A ETSE HLAHLOBO.MOREKISI O TSHWANETSE HO QETELA HO PAKA LITHO LE HO LOKELA HO THUSOA KA MATSATSI A 15 A HO SEBETSA KA MOR'A MOR'A MOREKISI A AMOHILE TEFO E FELETSENG.
2.3 TSAMAISO EA HO LOADING:MOREKI O TSHWANETSE HO TSEBISA MOREKI KA NAKO E LEBANG HO LAOA KA NAKO, MOREKI A KA HLOKELA HO HLOKOMELA HO LAOLWA.
3, HLAHLOBO:
HA MOCHINTŠI O QETILE, MOREKI O LOKELA HO TSEBISA MOREKI HO ETSA TLHAHLOBO PELE HO THUSOA, MOTHEKI O HLOMELA MOSEBETSI OA MOLEMO OA LITHO TSOHLE tse rekisitsoeng.MOREKISI O FIHLELA LITEHELO TSA TLHOKOMELISO BAKENG SA TLHOKOMELISO EA MACHINE.MOREKI O TLA TLA FEDKENG YA MOREKI HO TLA ETSA MOSEBETSI OA HLAHLOBO, KAPA MOREKI A KA SEBELISA KAROLO EFE KA EFE YA BORARO HO TLA FKKKENG YA MORETSI HO TLA ETSA MOSEBETSI OA HLAHLOBO.
4, KOMISI EA HO KENYA LE LISEBETSI:
HAEBA MOREKI A HLOKA, MOREKI O TSHWANETSE HO ROMELA THIMI YA TECHNICIAN FACTORY YA MORKI HO KENYA LE HO LEKOLA MORA OHLE.
Haeba ho na le thahasello ho mechini ea rona, ka kopo ikutloe u lokolohile ho ikopanya le rona:
Lengolo-tsoibila:info@tongsanextruder.com info@wpcmachinery.com
Mohala: 0086-13953226564
TEL:0086-532-82215318
Aterese: The West End le South Side Of Yangzhou Road, Jiaozhou City, Qingdao, China