1.Litlhahiso tsa mochini bakeng sa mohala oa tlhahiso ea pipe ea PP PE PPR:
Tšebeliso ea peipi ea peipi:
Ka mohala oa tlhahiso ea liphaephe tsa PE, o ka extrude boleng bo phahameng ba metsi le liphaephe tsa phepelo ea khase ea boleng bo phahameng .Liphaephe tsena tse hlahisoang ke mohala oa rona li na le ho satalla le ho feto-fetoha ha maemo , ho hanyetsa creep deformation ,ho hokahanngoa hantle ha mocheso .Large dismeter HDPE liphaephe li qala ho bapala haholo. karolo ea bohlokoa lits'ebetsong tsa phepelo ea metsi le khase teropong.
Melemo ea mochini oa mohala oa tlhahiso ea peipi:
Mohala ona o bokellelitsoe ka lattice kapa hlobo ea spiral, unit e ncha ea calibration le bate ea ho fafatsa e pholileng.Sistimi e tsoetseng pele ea taolo ea PLC le skrine e kholo ea chromatic liquid-crystal e etsa hore ts'ebetso e be bonolo haholoanyane, e be le sebopeho se bonolo sa mochini oa motho.
2. mefuta e fapaneng ea mohala oa tlhahiso ea PP PE PPR bakeng sa bophara bo fapaneng:
| Mohlala | Diameter(mm) | Moetso oa mochini oa ho tšoaea | Max.output(kg/h) |
| SJ-65B | φ110 | SJ-25 | 90-180 |
| SJ-90B | φ200 | SJ-30 | 200-320 |
| SJ-120B | φ400 | SJ-30 | 320-500 |
| SJ-150B | φ630 | SJ-30 | 550-700 |
3, Mohala oa mochini o na le mohala oa tlhahiso ea lipeipi tsa PE:
Mohala oa tlhahiso o na le sistimi ea taolo, extruder, hlobo, calibration unit, haul-off unit, planetary cutter le stacker.
1, Extruder e ka sehloohong: screw extruder e le 'ngoe
2, co-extruder: SJ30 extruder bakeng sa ho tšoaea line
3, hlooho ea lefu: boholo bo fapaneng bo ka sebelisa hlooho e fapaneng ea lefu
4, tanka e pholileng ea vacuum: bolelele ba limithara tse 6
5, ho fafatsa tanka ea metsi: bolelele ba limithara tse 6, bakeng sa bophara bo boholo, re ka hloka ho hlomella li-sete tse 2 kapa li-3 tsa tanka ea metsi a fafatsang.
6, mochini oa ho hula: bakeng sa bophara bo fapaneng, re ka hlomella mefuta e fapaneng ea mochini oa ho hula, joalo ka mofuta oa popane, mefuta e meraro ea popane, mefuta e mene ea popane.
7, mochini oa ho itšeha: mochini oa ho itšeha oa boleng bo holimo bakeng sa ho seha ho se nang lerōle
8. sehlahisoa sa stacker: bolelele ba limithara tse 6
1, MELAO EA TIISETSO:
1.1 TIISETSO NAKO:LIKHOELI 12, HO TLOHA LETSATSI LA PELE LA MECHINA E SEBELISANG LEBOLONG LA BATHO BA BATHO.
1.2 MOREKISI O TLA FANA: LITŠEBELETSO LE LIKAROLO TSE SEKETSENG,TŠEBELETSO EA MAHALA KA NAKO EOHLE EA TIISETSO EA LIHLOOHO.
1.3 TŠEBELETSO EA BOPHELO:MOREKISI O LOKELA HO FANA KA TŠEBELETSO EA BOPHELO BA NAKO EA BOPHELO BA LITHO TSE REKIsitsoeng, MOREKI A LEFA LIKAROLO TSE HLOKANG KA MOR'A MELAO EA TIISETSO EA LIKHOELI 12.
2, MAEMO A HO PHELA:
2.1 BOEMO BA HO PHELA:FOB QINGDAO KOU.
2.2 NAKO EA HO PHELA:KA NAKO A LE MATSATSI A 60 A HO SEBETSA KA MOR'A HO FUMANA TEFO E FETILENG FETA LETHATHAMO LA TSE KA HARE, Morekisi O LOKELA HO TSEBISA MOREKI HORE A ETSE HLAHLOBO.MOREKISI O TSHWANETSE HO QETELA HO PAKA LITHO LE HO LOKELA HO THUSOA KA MATSATSI A 15 A HO SEBETSA KA MOR'A MOR'A MOREKISI A AMOHILE TEFO E FELETSENG.
2.3 TSAMAISO EA HO LOADING:MOREKI O TSHWANETSE HO TSEBISA MOREKI KA NAKO E LEBANG HO LAOA KA NAKO, MOREKI A KA HLOKELA HO HLOKOMELA HO LAOLWA.
3, HLAHLOBO:
HA MOCHINTŠI O QETILE, MOREKI O LOKELA HO TSEBISA MOREKI HO ETSA TLHAHLOBO PELE HO THUSOA, MOTHEKI O HLOMELA MOSEBETSI OA MOLEMO OA LITHO TSOHLE tse rekisitsoeng.MOREKISI O FIHLELA LITEHELO TSA TLHOKOMELISO BAKENG SA TLHOKOMELISO EA MACHINE.MOREKI O TLA TLA FEDKENG YA MOREKI HO TLA ETSA MOSEBETSI OA HLAHLOBO, KAPA MOREKI A KA SEBELISA KAROLO EFE KA EFE YA BORARO HO TLA FKKKENG YA MORETSI HO TLA ETSA MOSEBETSI OA HLAHLOBO.
4, KOMISI EA HO KENYA LE LISEBETSI:
HAEBA MOREKI A HLOKA, MOREKI O TSHWANETSE HO ROMELA THIMI YA TECHNICIAN FACTORY YA MORKI HO KENYA LE HO LEKOLA MORA OHLE.
Haeba ho na le thahasello ho mechini ea rona, ka kopo ikutloe u lokolohile ho ikopanya le rona:
Lengolo-tsoibila:info@tongsanextruder.com info@wpcmachinery.com
Mohala: 0086-13953226564
TEL:0086-532-82215318
Aterese: The West End le South Side Of Yangzhou Road, Jiaozhou City, Qingdao, China
